From e5899099ab33993fa3f1ae8fe263613681b4916a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 31 Mar 2020 19:51:35 +0200 Subject: [PATCH] ARM: dts: stm32: Adjust PLL4 settings on AV96 The PLL4 is supplying SDMMC12, SDMMC3 and SPDIF with 120 MHz and FDCAN with 96 MHz. This isn't good for the SDMMC interfaces, which can not easily divide the clock down to e.g. 50 MHz for high speed SD and eMMC devices, so those devices end up running at 30 MHz as that is 120 MHz / 4. Adjust the PLL4 settings such that both PLL4P and PLL4R run at 100 MHz instead, which is easy to divide to 50MHz for optimal operation of both SD and eMMC, SPDIF clock are not that much slower and FDCAN is also unaffected. Reviewed-by: Patrice Chotard Reviewed-by: Patrick Delaunay Signed-off-by: Marek Vasut Cc: Manivannan Sadhasivam Cc: Patrick Delaunay Cc: Patrice Chotard Reviewed-by: Patrick Delaunay --- arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi b/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi index f2ff7a23c5..690ee203a4 100644 --- a/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi @@ -130,11 +130,11 @@ u-boot,dm-pre-reloc; }; - /* VCO = 480.0 MHz => P = 120, Q = 40, R = 96 */ + /* VCO = 600.0 MHz => P = 100, Q = 50, R = 100 */ pll4: st,pll@3 { compatible = "st,stm32mp1-pll"; reg = <3>; - cfg = < 1 39 3 11 4 PQR(1,1,1) >; + cfg = < 1 49 5 11 5 PQR(1,1,1) >; u-boot,dm-pre-reloc; }; }; -- 2.39.5