From bf438dbc6dd7cc79a67e768ed65d500bd0a959be Mon Sep 17 00:00:00 2001 From: Michael Trimarchi Date: Wed, 20 Jul 2022 18:22:15 +0200 Subject: [PATCH] mtd: nand: toshiba: Retrieve ECC requirements from extended ID Upstream linux commit fb3bff5b407e58. This patch enables support to read the ECC strength and size from the NAND flash using Toshiba Memory SLC NAND extended-ID. This patch is based on the information of the 6th ID byte of the Toshiba Memory SLC NAND. Signed-off-by: Michael Trimarchi Signed-off-by: Dario Binacchi --- drivers/mtd/nand/raw/nand_toshiba.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c index f7426fa59f..99dc44df67 100644 --- a/drivers/mtd/nand/raw/nand_toshiba.c +++ b/drivers/mtd/nand/raw/nand_toshiba.c @@ -37,6 +37,32 @@ static void toshiba_nand_decode_id(struct nand_chip *chip) (chip->id.data[5] & 0x7) == 0x6 /* 24nm */ && !(chip->id.data[4] & 0x80) /* !BENAND */) mtd->oobsize = 32 * mtd->writesize >> 9; + + /* + * Extract ECC requirements from 6th id byte. + * For Toshiba SLC, ecc requrements are as follows: + * - 43nm: 1 bit ECC for each 512Byte is required. + * - 32nm: 4 bit ECC for each 512Byte is required. + * - 24nm: 8 bit ECC for each 512Byte is required. + */ + if (chip->id.len >= 6 && nand_is_slc(chip)) { + chip->ecc_step_ds = 512; + switch (chip->id.data[5] & 0x7) { + case 0x4: + chip->ecc_strength_ds = 1; + break; + case 0x5: + chip->ecc_strength_ds = 4; + break; + case 0x6: + chip->ecc_strength_ds = 8; + break; + default: + WARN(1, "Could not get ECC info"); + chip->ecc_step_ds = 0; + break; + } + } } static int toshiba_nand_init(struct nand_chip *chip) -- 2.39.5