From bc72a919e037782f64e3ac45c91bc60408e57e85 Mon Sep 17 00:00:00 2001
From: Bryan Wu <bryan.wu@analog.com>
Date: Wed, 16 Dec 2009 22:04:01 -0500
Subject: [PATCH] usb: musb: change rxcsr register from write to
read/modify/write
The RX Control/Status register has bits that we want to preserve, so don't
just write out a single bit. Preserve the others bits in the process.
The original code posted to the u-boot list had this behavior, but looks
like it was lost somewhere along the way to merging.
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
---
drivers/usb/musb/musb_hcd.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index 5481600509..adb8c38527 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -604,7 +604,8 @@ int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
(len-txlen) : dev->epmaxpacketin[ep];
/* Set the ReqPkt bit */
- writew(MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
+ csr = readw(&musbr->rxcsr);
+ writew(csr | MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
/* Wait until the RxPktRdy bit is set */
if (!wait_until_rxep_ready(dev, MUSB_BULK_EP)) {
@@ -775,7 +776,8 @@ int submit_int_msg(struct usb_device *dev, unsigned long pipe,
(len-txlen) : dev->epmaxpacketin[ep];
/* Set the ReqPkt bit */
- writew(MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
+ csr = readw(&musbr->rxcsr);
+ writew(csr | MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
/* Wait until the RxPktRdy bit is set */
if (!wait_until_rxep_ready(dev, MUSB_INTR_EP)) {
--
2.39.5