From b53c122631d3e88280909c04102d7859c311cdfe Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Fri, 2 Oct 2020 11:16:08 +0200 Subject: [PATCH] video: dw-mipi-dsi: driver-specific configuration of phy timings The timing values for dw-dsi are often dependent on the used display and according to Philippe Cornu will most likely also depend on the used phy technology in the soc-specific implementation. To solve this and allow specific implementations to define them as needed add a new get_timing callback to phy_ops and call this from the dphy_timing function to retrieve the necessary values for the specific mode. This is based on the Linux commit [1] and adapted to the U-Boot driver. [1] 25ed8aeb9c39 ("drm/bridge/synopsys: dsi: driver-specific configuration of phy timings") Signed-off-by: Neil Armstrong --- drivers/video/dw_mipi_dsi.c | 17 +++++++++++------ include/mipi_dsi.h | 16 ++++++++++++++++ 2 files changed, 27 insertions(+), 6 deletions(-) diff --git a/drivers/video/dw_mipi_dsi.c b/drivers/video/dw_mipi_dsi.c index 2743836fb4..44a60ac532 100644 --- a/drivers/video/dw_mipi_dsi.c +++ b/drivers/video/dw_mipi_dsi.c @@ -645,8 +645,13 @@ static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi, static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi) { + const struct mipi_dsi_phy_ops *phy_ops = dsi->phy_ops; + struct mipi_dsi_phy_timing timing = {0x40, 0x40, 0x40, 0x40}; u32 hw_version; + if (phy_ops->get_timing) + phy_ops->get_timing(dsi->device, dsi->lane_mbps, &timing); + /* * TODO dw drv improvements * data & clock lane timers should be computed according to panel @@ -658,16 +663,16 @@ static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi) hw_version = dsi_read(dsi, DSI_VERSION) & VERSION; if (hw_version >= HWVER_131) { - dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME_V131(0x40) | - PHY_LP2HS_TIME_V131(0x40)); + dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME_V131(timing.data_hs2lp) | + PHY_LP2HS_TIME_V131(timing.data_lp2hs)); dsi_write(dsi, DSI_PHY_TMR_RD_CFG, MAX_RD_TIME_V131(10000)); } else { - dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40) | - PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000)); + dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(timing.data_hs2lp) | + PHY_LP2HS_TIME(timing.data_lp2hs) | MAX_RD_TIME(10000)); } - dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40) - | PHY_CLKLP2HS_TIME(0x40)); + dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(timing.clk_hs2lp) + | PHY_CLKLP2HS_TIME(timing.clk_lp2hs)); } static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi) diff --git a/include/mipi_dsi.h b/include/mipi_dsi.h index c8a7d3daef..55c7ab3328 100644 --- a/include/mipi_dsi.h +++ b/include/mipi_dsi.h @@ -96,6 +96,20 @@ struct mipi_dsi_host_ops { const struct mipi_dsi_msg *msg); }; +/** + * struct mipi_dsi_phy_timing - DSI host phy timings + * @data_hs2lp: High Speed to Low Speed Data Transition Time + * @data_lp2hs: Low Speed to High Speed Data Transition Time + * @clk_hs2lp: High Speed to Low Speed Clock Transition Time + * @clk_lp2hs: Low Speed to High Speed Clock Transition Time + */ +struct mipi_dsi_phy_timing { + u16 data_hs2lp; + u16 data_lp2hs; + u16 clk_hs2lp; + u16 clk_lp2hs; +}; + /** * struct mipi_dsi_phy_ops - DSI host physical operations * @init: initialized host physical part @@ -107,6 +121,8 @@ struct mipi_dsi_phy_ops { int (*get_lane_mbps)(void *priv_data, struct display_timing *timings, u32 lanes, u32 format, unsigned int *lane_mbps); void (*post_set_mode)(void *priv_data, unsigned long mode_flags); + int (*get_timing)(void *priv_data, unsigned int lane_mbps, + struct mipi_dsi_phy_timing *timing); }; /** -- 2.39.5