From 1e26c20662e9a7483e64d609aab286235fe13a3b Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Tue, 9 Apr 2024 17:01:58 +0200 Subject: [PATCH] ARM: dts: stm32: Don't probe led-red/led-blue at boot for stm32mp135f-dk-u-boot led-red and button dedicated to fastboot share the same gpio GPIOA13. led-blue and button dedicated to stm32prog share the same gpio GPIOA14. Led driver is probed early so the corresponding gpio is taken and configured in output which forbid fastboot and stm32prog button usage. To avoid this, remove the "default-state" property from led-red and led-blue led's node. This will avoid to trigger the led driver probe() to configure the led default state during startup. Signed-off-by: Patrice Chotard Reviewed-by: Patrick Delaunay --- arch/arm/dts/stm32mp135f-dk-u-boot.dtsi | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi b/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi index e64ded1346..8f42735609 100644 --- a/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi +++ b/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi @@ -30,10 +30,13 @@ }; leds { + led-blue { + /delete-property/default-state; + }; + led-red { color = ; gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; - default-state = "off"; }; }; }; -- 2.39.5