From 0ae3c79b7c126b1e91c5851ed2549e01e8c37238 Mon Sep 17 00:00:00 2001 From: Mark Kettenis Date: Mon, 14 Feb 2022 22:09:26 +0100 Subject: [PATCH] doc: board: apple: Update Apple M1 documentation U-Boot now supports NVMe storage and on the laptop models, the SPI keyboard. Since we now disable the debug console by default provide instructions on how the enable the debug console including a table listing the appropriate UART base address for each of the supported SoCs. Signed-off-by: Mark Kettenis --- doc/board/apple/m1.rst | 33 ++++++++++++++++++++++++++++----- 1 file changed, 28 insertions(+), 5 deletions(-) diff --git a/doc/board/apple/m1.rst b/doc/board/apple/m1.rst index 9fa21767c9..083bfb0a1a 100644 --- a/doc/board/apple/m1.rst +++ b/doc/board/apple/m1.rst @@ -7,18 +7,21 @@ Allows Apple Silicon Macs to boot U-Boot via the m1n1 bootloader developed by the Asahi Linux project. At this point the machines with the following SoCs work: - - Apple M1 SoC + - Apple M1 SoC (t8103) + - Apple M1 Pro SoC (t6000) + - Apple M1 Max SoC (t6001) On these SoCs the following hardware is supported: - S5L serial port + - SPI keyboard (on laptops) - Framebuffer + - NVMe storage - USB 3.1 Type-C ports -Device trees are currently provided for the M1 Mac mini (2020, J274) -and M1 MacBook Pro 13" (2020, J293). The M1 MacBook Air (2020) is -expected to work with the J293 device tree. The M1 iMac (2021) may -work with the J274 device tree. +Device trees are currently provided for the M1 Mac mini (2020, J274), +M1 MacBook Pro 13" (2020, J293), M1 MacBook Air (2020, J313) and M1 +iMac (2021, J456/J457). Building U-Boot --------------- @@ -57,3 +60,23 @@ Instructions on how to install U-Boot on your Mac can be found at: https://github.com/AsahiLinux/docs/wiki/Developer-Quickstart Just replace ``m1n1.macho`` with ``u-boot.macho`` in the instructions. + +Debug UART +---------- + +Since the base address of the UART is SoC-dependent, the debug UART is +not enabled by default. To enable the debug UART the base address +needs to be adjusted and the CONFIG_DEBUG_UART option needs to be +enabled. The table below gives the correct base address for the +supported SoCs. + +.. list-table:: + :widths: 32 16 + :header-rows: 1 + + * - SoC + - Base Address + * - M1 (t8103) + - 0x235200000 + * - M1 Pro/Max (t6000/t6001) + - 0x39b200000 -- 2.39.5