Simon Glass [Thu, 7 Jan 2021 04:35:18 +0000 (21:35 -0700)]
binman: Support alignment of files
When packing files it is sometimes useful to align the start of each file,
e.g. if the flash driver can only access 32-bit-aligned data. Provides a
new property to support this.
Simon Glass [Thu, 7 Jan 2021 04:35:17 +0000 (21:35 -0700)]
binman: Allow vblock to include devicetree blobs
At present if a devicetree blob is included in a vblock it does not deal
with updates. This is because the vblock is created once at the start and
does not have a method to update itself later, after all the entry
contents are finalised.
Fix this by adjusting how the vblock is created.
Also simplify Image.ProcessEntryContents() since it effectively duplicates
the code in Section.ProcessContents().
Simon Glass [Thu, 7 Jan 2021 04:35:16 +0000 (21:35 -0700)]
binman: Support reading an image with entry args
Normally when an entry is created, any entry arguments it has are required
to be provided, so it can actually generate its contents correctly.
However when an existing image is read, Entry objects are created for each
of the entries in the image. This happens as part of the process of
reading the image into binman.
In this case we don't need the entry arguments, since we do not intend to
regenerate the entries, or at least not unless requested. So there is no
sense in reporting an error for missing entry arguments.
Add a new property for the Image to handle this case. Update the error
reporting to be conditional on this property.
Simon Glass [Thu, 7 Jan 2021 04:35:15 +0000 (21:35 -0700)]
binman: Support finding symbols in sub-sections
At present binman only supports resolving symbols in the same section as
the binary that uses it. This is quite limited because we often need to
group entries into different sections.
Enhance the algorithm to search the entire image for symbols.
Simon Glass [Thu, 7 Jan 2021 04:35:11 +0000 (21:35 -0700)]
patman: Correct lz4 compression parameters
At present on large files, lz4 uses a larger block size (e.g. 256KB) than
the 64KB supported by the U-Boot decompression implementation. Also it is
optimised for maximum compression speed, producing larger output than we
would like.
Simon Glass [Thu, 31 Dec 2020 16:52:13 +0000 (09:52 -0700)]
tpm: cr50: Add a better description and more debug
Update the TPM description to include the interrupt mechanicm since this
is useful to know. Also add a warning if the TPM cannot be found and a
debug line if it succeeds.
Simon Glass [Thu, 31 Dec 2020 16:52:12 +0000 (09:52 -0700)]
tpm: cr50: Check for valid locality
When the Cr50 starts up it doesn't have a valid locality. The driver sets
it to -1 to indicate that. Tracking this allows cr50_i2c_cleanup() to
avoid releasing a locality that was not claimed.
However the helper functions that generate the flags use a u8 type which
cannot support -1, so they return a locality of 0xff.
Fix this by updating the type. With this, 'tpm startup TPM2_SU_CLEAR'
works as expected.
Excluding ut str in test/cmd_ut.c but compiling test/str_ut.c results in
failure of the Python test invoking the C unit tests as observed on
sipeed_riscv_smode_defconfig:
Excluding ut bootm in test/cmd_ut.c but compiling test/bootm.c results in
failure of the Python test invoking the C unit tests as observed on
sipeed_riscv_smode_defconfig:
Fixes: f158ba15ee0f ("bootm: Add tests for fixup_silent_linux()") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Thu, 28 Jan 2021 19:39:56 +0000 (14:39 -0500)]
test: Update test_fs to not use deprecated pytest.yield_fixture()
As noted in comments, yield_fixture has been deprecated for longer than
our minimum required version of pytest. Newer versions of pytest cause
this to be a louder warning, and as the migration is trivial, perform it
now.
sandbox: Traceback (most recent call last):
File "./test/py/test.py", line 20, in <module>
sys.exit(load_entry_point('pytest', 'console_scripts', 'pytest')(args))
TypeError: console_main() takes 0 positional arguments but 1 was given
The definition of console_scripts has changed as follows:
The new function console_main() has a comment:
"This function is not meant for programmable use; use `main()`"
Hence let's call pytest.main() directly.
Move args processing into the __main__ paragraph.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Tom Rini <trini@konsulko.com>
Compiling wandboard_defconfig with CONFIG_UT_LOG=y leads to a build error:
test/log/pr_cont_test.c: In function ‘log_test_pr_cont’:
test/log/pr_cont_test.c:28:14: error:
‘gd_t’ {aka ‘volatile struct global_data’} has no member named ‘log_fmt’
log_fmt = gd->log_fmt;
We do not want to let CONFIG_UT_LOG depend on CONFIG_LOG=y because we have
tests for logging functions called with CONFIG_LOG=n.
Fix the build dependency.
Reported-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Matthias Brugger [Wed, 27 Jan 2021 09:42:30 +0000 (10:42 +0100)]
fs: btrfs: Select SHA256 in Kconfig
Since commit 565a4147d17a ("fs: btrfs: Add more checksum algorithms")
btrfs uses the sha256 checksum algorithm. But Kconfig lacks to select
it. This leads to compilation errors:
fs/built-in.o: In function `hash_sha256':
fs/btrfs/crypto/hash.c:25: undefined reference to `sha256_starts'
fs/btrfs/crypto/hash.c:26: undefined reference to `sha256_update'
fs/btrfs/crypto/hash.c:27: undefined reference to `sha256_finish'
SkyLake.Huang [Wed, 20 Jan 2021 07:31:33 +0000 (15:31 +0800)]
spi: mtk_snor: add support for MTK SPI NOR controller
This patch adds support for MTK SPI NOR controller, which you
can see on mt7622 & mt7629.
1. This controller is designed only for SPI NOR. We can't adjust
its bus clock dynamically. Set clock in dts instead.
2. This controller only supports 1-1-1 write mode.
3. Remove mtk_snor_match_read() since upper SPI-MEM layer already
handles command.
4. sf read/write/update commands are tested with this driver.
rtc: add rtc-abx80x, a driver for the Abracon AB x80x i2c rtc
This is a basic driver for the ultra-low-power Abracon AB x80x series
of RTC chips. It supports in particular, the supersets AB0805 and AB1805.
It allows reading and writing the time, and enables the supercapacitor or
battery charger.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
autoboot: fix illegal memory access when stop key and delay key are empty
If both stop key and delay key are empty, the length of these
keys is 0. The subtraction operation will cause the u_int type
variable to overflow, will cause illegal memory access in key
input loop.
This commit fixes this bug by using int type instead of u_init. Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Simon Glass [Thu, 14 Jan 2021 03:29:57 +0000 (20:29 -0700)]
binman: Allow reading entries from a subnode
Some images may have multiple copies of the same thing, e.g. two versions
of the read/write U-Boots. It is necessary to read data from one or other
of these under selection of the verified-boot logic. Add a function to
select the subnode to use.
Simon Glass [Thu, 14 Jan 2021 03:29:55 +0000 (20:29 -0700)]
crc32: Exclude crc32 from TPL
Unfortunately the toolchain often brings in the crc32 table even if the
function is not actually used. For now, exclude it from the TPL build,
which is very sensitive to size.
Simon Glass [Thu, 14 Jan 2021 03:29:54 +0000 (20:29 -0700)]
mmc: pci_mmc: Set the removable flag
Set this flag so that it is available to those looking at the device. For
non-removable devices there is no need to check for insertion/removable
since the media can never change.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Simon Glass [Thu, 14 Jan 2021 03:29:52 +0000 (20:29 -0700)]
mmc: pci_mmc: Only generate ACPI code for the SD card
At present if an eMMC part is in the system, the ACPI table generated
will include information about that, as well as the SD card. We only need
to include the SD card, since it has a card-detect GPIO. Use a different
compatible string for each option, and add code only for the SD card.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Simon Glass [Thu, 14 Jan 2021 03:29:51 +0000 (20:29 -0700)]
uuid: Add a comment for UUID_STR_LEN
This macro is the length of the string but excludes the terminator. Users
must add 1 when declaring a large-enough string. Add a comment to make
this clear.
Simon Glass [Thu, 14 Jan 2021 03:29:46 +0000 (20:29 -0700)]
video: Allow syncing the entire framebuffer to the copy
In some cases so much of the framebuffer is updated that it is not worth
copying the changes piece by piece to the copy framebuffer. Add a function
to copy the whole thing.
Simon Glass [Thu, 14 Jan 2021 03:29:42 +0000 (20:29 -0700)]
spl: Add functions for next and previous phase
It is useful to be able to figure out which phase we are loading next and
which phase we came from. Add some functions to handle this as well as
returning the name of a phase. This allows messages like "Booting to x"
where x is the next phase.
At present, TPL says 'Jumping to U-Boot' at the end, when in fact it is
jumping to SPL. This is confusing, so use the new functions to correct
this.
Tests for this will come with an upcoming minor SPL test refactor.
Philippe Reynes [Tue, 12 Jan 2021 18:18:54 +0000 (19:18 +0100)]
lib: rsa: rsa-verify: don't look for keys in the FIT image
In the function rsa_verify_hash, if the "main" key doesn't
work, u-boot try others keys. But it searches those keys
in the FIT image instead of the u-boot device tree.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Stefan Roese [Tue, 12 Jan 2021 11:03:43 +0000 (12:03 +0100)]
pci: Remove CONFIG_PCI_ENUM_ONLY as it's not used (any more)
This patch completely removes CONFIG_PCI_ENUM_ONLY from the PCI code as
it is not configured for any board (any more). With this removal, some
PCI related files get cleaned up a bit.
Additional, dm_pciauto_setup_device() is now static, as it's not
referenced from any code outside of this C file.
Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
common: fit-sig: Fix error message in fit_config_verify_sig()
In fit_config_verify_sig(), when no 'signature*' subnode exists in
the configuration node, the fdt_for_each_subnode() loop is a no-op.
Therefore, no error flags are set, and 'err_,sg' is not populated
with an error string. This is incorrect behavior.
Populate err_msg to indicate that no 'signature' is found, before
entering the loop. The first call to fit_image_verify_sig() will
override clear err_msg, or set it to a more specific message.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Pali Rohár [Wed, 4 Nov 2020 14:33:44 +0000 (15:33 +0100)]
Makefile: Do not call useless command 'true'
Macro 'cmd_objcopy_uboot' currently does not work with passed empty command
expanded from 'cmd_static_rela' and therefore dummy command 'true' is set
in 'cmd_static_rela' to workaround this issue.
Eliminate it now by fixing 'cmd_objcopy_uboot' macro to work also with
empty 'cmd_static_rela' macro and remove useless invocation of command
'true'.
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org>
- Espressobin: Disable slot when emmc is not present (Pali)
- DS414; config header cleanup (Phil)
- PCI: auto-config enhancement (Phil)
- pci_mvebu: Also map IO region (Phil)
- serial: a3720: Implement pending method for output direction (Pali)
- turris_mox: Enable a few commands (Marek)
- helios4 & ClearFog changes (Dennis)
- Plus some minor misc changes
Neil Armstrong [Wed, 20 Jan 2021 08:54:53 +0000 (09:54 +0100)]
cmd: pxe: add support for FDT overlays
This adds support for specifying FDT overlays in an extlinux/pxelinux
configuration file.
Without this, there is no simple way to apply overlays when the kernel
and fdt is loaded by the pxe command.
This change adds the 'fdtoverlays' keyword for a label, supporting multiple
overlay files to be applied on top of the fdt specified in the 'fdt' or
'devicetree' keyword.
Marek Vasut [Sat, 16 Jan 2021 23:16:16 +0000 (00:16 +0100)]
net: phy: micrel: Try default PHY ofnode first
The phydev structure has a PHY OF node pointer in it, use that OF node
first when looking up PHY OF node properties, since that is likely the
correct PHY OF node pointer. If the pointer is not valid, which is the
case e.g. on legacy DTs, fall back to parsing MAC ethernet-phy subnode.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
Abbie Chang [Thu, 14 Jan 2021 21:34:12 +0000 (13:34 -0800)]
net: phy: ca_phy: Add driver for CAxxxx SoCs
Add phy driver support for MACs embedded inside Cortina Access SoCs
Signed-off-by: Abbie Chang <abbie.chang@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Joe Hershberger <joe.hershberger@ni.com> CC: Tom Rini <trini@konsulko.com> CC: Aaron Tseng <aaron.tseng@cortina-access.com>
Moved out PHY specific code out of Cortina NI Ethernet driver
and into a Cortina Access PHY interface driver
Stefan Roese [Mon, 16 Nov 2020 17:02:30 +0000 (18:02 +0100)]
net: e1000: Add missing address translations
Add some missing address translations from virtual address in local DRAM
to physical address, which is needed for the DMA transactions to work
correctly.
This issue was detected while testing the e1000 driver on the MIPS
Octeon III platform, which needs address translation.
Signed-off-by: Stefan Roese <sr@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com>
Stefan Roese [Mon, 16 Nov 2020 17:02:29 +0000 (18:02 +0100)]
net: e1000: Use virt_to_phys() instead of pci_virt_to_mem()
Using (dm_)pci_virt_to_mem() is incorrect to translate the virtual
address in local DRAM to a physical address. The correct macro here
is virt_to_phys() so switch to using this macro.
As virt_to_bus() is now not used any more, this patch also removes
both definitions (DM and non-DM).
This issue was detected while testing the e1000 driver on the MIPS
Octeon III platform, which needs address translation.
Signed-off-by: Stefan Roese <sr@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com>
Marek Behún [Tue, 19 Jan 2021 14:49:26 +0000 (15:49 +0100)]
arm: mvebu: turris_mox: enable setexpr command in defconfig
Enable setexpr command in defconfig for Turris MOX. We have found that
this is sometimes useful in U-Boot scripts and there is enough space in
NOR memory on MOX.
Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
Pali Rohár [Thu, 14 Jan 2021 14:46:35 +0000 (15:46 +0100)]
serial: a3720: Implement pending method for output direction
To check if some output characters are waiting either in Transmitter
Holding Register or Transmitter Shift Register we need to look at
TX_EMPTY bit of UART Status Register.
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
Phil Sutter [Sun, 3 Jan 2021 22:06:46 +0000 (23:06 +0100)]
pci: pci_mvebu: Define an IO region as well
Configure an IO region and window for PNP identical to how MEM region is
set up. Linux does this only if the DT defines a pcie-io-aperture
property for the SOC, but since all supported boards do this should not
be needed.
Signed-off-by: Phil Sutter <phil@nwl.cc> Reviewed-by: Stefan Roese <sr@denx.de>
Phil Sutter [Sun, 3 Jan 2021 22:06:45 +0000 (23:06 +0100)]
pci: Make auto-config code a little more robust
On my DS414, some PCI devices return odd values when probing BAR sizes.
An obvious case is all-ones response, the Linux driver
(drivers/pci/probe.c) catches those explicitly and a comment explains
that either bit 0 or bit 1 must be clear (depending on MEM or IO type).
Other BARs return e.g. 0xfff0000f or 0xfff00004 and thus manage to break
size calculation due to the "middle" zeroes. Mitigate that copying more
or less what Linux does and do a "find least bit set".
Signed-off-by: Phil Sutter <phil@nwl.cc> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
Pali Rohár [Mon, 21 Dec 2020 10:09:10 +0000 (11:09 +0100)]
arm: mvebu: Espressobin: Disable slot when emmc is not present
This change extends previous commit 061c6d1b238a ("arm: mvebu: Espressobin:
Detect presence of emmc at runtime") and when emmc is not present then emmc
is removed from U-Boot DM and corresponding slot is disabled. Therefore on
Espressobin board without soldered emmc, state of emmc hw should be same as
if emmc was disabled in DTS.
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
Harm Berntsen [Sun, 29 Nov 2020 10:08:02 +0000 (10:08 +0000)]
gpio: Add support for DM GPIO for Kirkwood
The Armada driver also works on Nedap's custom Kirkwood board with a
Marvell 88F6180 CPU. The original commit of that driver,
commit 704d9a645e17 ("gpio: Add DM GPIO driver for Marvell MVEBU"),
also mentions that this driver would be suitable for Kirkwood. This
does not completely replace the Kirkwood specific driver as there
are still boards depending on that driver.
Signed-off-by: Harm Berntsen <harm.berntsen@nedap.com> CC: Stefan Roese <sr@denx.de>, Reviewed-by: Stefan Roese <sr@denx.de>
Dennis Gilmore [Fri, 11 Sep 2020 16:56:59 +0000 (11:56 -0500)]
ARM: Distro boot: document the need for fdtfile variable to be set
When testing builds provided in https://github.com/openwrt/openwrt/pull/3360
I discovered that fdtfile was not set and as a result the firmware was not
functional. So I am documenting what is needed.
Jernej Skrabec [Mon, 11 Jan 2021 20:11:53 +0000 (21:11 +0100)]
sunxi: Add support for OrangePi Zero2
OrangePi Zero2 is SBC based on Allwinner H616 with 1 GiB of RAM, SD card
support, gigabit ethernet, micro HDMI, WIFI, Bluetooth and 1 USB 2.0
port. It also has two GPIO headers which allows further peripherals to
be used.
The devicetree file is taken from v3 of the OrangePi Zero2 Linux
submission [1], which it's not yet merged.
projects / u-boot.git / log
;st=author){kind=link}
