Jonas Karlman [Mon, 22 Apr 2024 06:28:55 +0000 (06:28 +0000)]
rockchip: rk3588-coolpi: Fix .dtb-file entries in Makefile
Fix CoolPi 4 Model B and CoolPi CM5 EVB .dtb-file entries in Makefile.
Fixes: 3e15dee38d45 ("board: rockchip: Add support for rk3588 based Cool Pi CM5 EVB") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jonas Karlman [Mon, 22 Apr 2024 06:28:54 +0000 (06:28 +0000)]
rockchip: rk3588-coolpi: Add boards to documentation
Add the CoolPi 4 Model B and CoolPi CM5 EVB board to the documentation.
Fixes: 3e15dee38d45 ("board: rockchip: Add support for rk3588 based Cool Pi CM5 EVB") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jonas Karlman [Mon, 22 Apr 2024 06:28:53 +0000 (06:28 +0000)]
rockchip: rk3566-pinetab2: Fix reading FIT from SPI flash
The SF_DEFAULT_SPEED Kconfig option got lost during merge and this
prevent reading FIT from SPI flash.
Restore the SF_DEFAULT_SPEED option to fix this.
Fixes: 8a94c376f6cb ("rockchip: Use common bss and stack addresses on RK356x") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jonas Karlman [Mon, 22 Apr 2024 06:28:50 +0000 (06:28 +0000)]
rockchip: rk3588: Update bootph props
After the commit aca95282c1b7 ("Makefile: Use the fdtgrep -u flag")
bootph props is propagating to parent nodes.
Update bootph props to ensure eMMC, SD-card and SPI flash is available
in SPL and U-Boot proper pre-reloc phase also remove unneeded bootph
props that automatically is propagated to parent nodes.
Also adjust pinctrl nodes to only be included in boot phases where they
are needed and add any missing pinctrl node needed in SPL.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jonas Karlman [Mon, 22 Apr 2024 06:28:49 +0000 (06:28 +0000)]
rockchip: rk356x: Update bootph props
After the commit aca95282c1b7 ("Makefile: Use the fdtgrep -u flag")
bootph props is propagating to parent nodes.
Update bootph props to ensure eMMC, SD-card and SPI flash is available
in SPL and U-Boot proper pre-reloc phase also remove unneeded bootph
props that automatically is propagated to parent nodes.
Also adjust pinctrl nodes to only be included in boot phases where they
are needed and add any missing pinctrl node needed in SPL.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
SPL_ROCKCHIP_BACK_TO_BROM should normally only be enabled when BROM
should load U-Boot binary. SPL on Anbernic RGxx3 devices load TF-A and
U-Boot proper from FIT images and does never jump back to BROM from SPL.
Remove the superfluous Kconfig option from defconfig to align with other
RK356x boards.
This patch have no intended change in boot behavior.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jonas Karlman [Mon, 22 Apr 2024 06:28:40 +0000 (06:28 +0000)]
clk: rockchip: rk356x: Fix set rate of SCLK_SFC clock
The SCLK_SFC can be set to a rate of 24, 50, 75, 100, 125 or 150 MHz.
However, clk_set_rate() will fail unless one of those exact rates are
used, and with newer and updated device tree files that contain
spi-max-frequency values that does not exactly match these rates use of
SPI flash may fail.
Fix this by using the highest possible rate that exceeds or is equal to
the requested rate.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jonas Karlman [Mon, 22 Apr 2024 06:28:39 +0000 (06:28 +0000)]
clk: rockchip: rk3588: Add REF_CLK_USB3OTGx support
The REF_CLK_USB3OTGx clocks is used as reference clock for USB3 block.
Add simple support to get rate of REF_CLK_USB3OTGx clocks to fix
reference clock period configuration.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Acked-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jonas Karlman [Mon, 8 Apr 2024 18:14:03 +0000 (18:14 +0000)]
rockchip: rk3308: Fix loading FIT from SD-card when booting from eMMC
When RK3308 boards run SPL from eMMC and fail to load FIT from eMMC due
to it being missing or checksum validation fails there can be a fallback
to read FIT from SD-card. However, without proper pinctrl configuration
reading FIT from SD-card may fail:
U-Boot SPL 2024.04-rc4 (Mar 16 2024 - 12:36:12 +0000)
Trying to boot from MMC2
mmc_load_image_raw_sector: mmc block read error
Trying to boot from MMC1
Card did not respond to voltage select! : -110
mmc_init: -95, time 12
spl: mmc init failed with error: -95
Trying to boot from MMC2
mmc_load_image_raw_sector: mmc block read error
SPL: failed to boot from all boot devices (err=-6)
### ERROR ### Please RESET the board ###
Fix this by tagging related emmc and sdmmc pinctrl nodes with bootph
props. Also sort and move common nodes shared by all boards to the SoC
u-boot.dtsi.
Imply SPL_PINCTRL and SPL_DM_SEQ_ALIAS to apply correct pinconf before
trying to load FIT from a device.
Move u-boot,spl-boot-order to soc u-boot.dtsi and define both sdmmc and
emmc nodes as fallback.
Also fix boot from eMMC (SD NAND) on ROCK Pi S by using correct pinctrl.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jonas Karlman [Mon, 8 Apr 2024 18:14:01 +0000 (18:14 +0000)]
rockchip: rk3308: Generate ethaddr based on cpu id
Like other Rockchip SoCs the RK3308 has cpu id programmed into OTP
memory. The rockchip_otp driver already support the RK3308 variant.
However, the device tree is missing a node to enable use of OTP.
Add the missing otp node to soc u-boot.dtsi, enable the rockchip_otp
driver and enable use of misc_init_r() to set ethaddr based on cpu id.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Sort imply statements under ROCKCHIP_RK3308 alphabetically and remove
the config SPL_SERIAL statement from soc Kconfig file, it is already
implyed in arch Kconfig.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
rockchip: spl-boot-order: show DT path for missing device
When debugging the SPL boot order, the node ID of a device which hasn't
been found is printed but it can be quite hard to relate that to the
specific devicetree node. To aid debugging, print the node path instead of
the cryptic node ID.
Original debug message:
board_boot_order: could not map node @73c to a boot-device
With this patch applied this becomes e.g:
board_boot_order: could not map node /spi@ff1d0000/flash@0 to a boot-device
Reviewed-by: Dragan Simic <dsimic@manjaro.org> Signed-off-by: Christopher Obbard <chris.obbard@collabora.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Quentin Schulz [Fri, 9 Feb 2024 13:18:09 +0000 (14:18 +0100)]
rockchip: ringneck-px30: put STM32_RST line in input mode instead of output
The STM32_RST line is routed to the ATtiny microcontroller
PA0/RESET/UPDI pin. By driving the PX30 SoC pin as GPIO output high, we
prevent external UPDI to be used for flashing without first putting this
pin as GPIO input, an extra step we could avoid in userspace.
There's an external hardware pull-up strong enough to keep the STM32_RST
state high on ATtiny side but weak enough it can be overridden by
external UPDI. This also means it is safe to use for the STM32 variant,
where STM32_RST line will be in the same state as if output high was
used.
The Q7 standard specifies that MFG_NC1 and MFG_NC2 (used for UPDI for
Ringneck) pins should neither be driven by the carrierboard, nor have
pull-up or pull-down resistors. This means this commit is safe to use
regardless of the carrierboard this module would be connected to
(provided it follows the Q7 standard).
Jonas Karlman [Fri, 22 Mar 2024 20:50:21 +0000 (20:50 +0000)]
rockchip: spl: Cache boot source id for later use
Rockchip BROM writes a boot source id at CFG_IRAM_BASE + 0x10, this id
indicates from what storage media TPL/SPL was loaded from.
SPL uses this id to determine what device "same-as-spl" represent when
determining from where FIT should be loaded. This works as long as the
boot_devices array contain a matching id <-> node path entry.
However, SPL typically load a small part of TF-A into SRAM and on RK3399
this overwrites the CFG_IRAM_BASE + 0x10 addr used for boot source id.
For affected devices the u-boot,spl-boot-device would not be set when
booting from SPI flash and the flash@0 node was not explicitly listed
in the u-boot,spl-boot-order prop.
Here boot source id is 3 before FIT images is loaded, and 0 after:
U-Boot SPL 2024.04-rc4 (Mar 15 2024 - 17:26:19 +0000)
board_spl_was_booted_from: brom_bootdevice_id 3 maps to '/spi@ff1d0000/flash@0'
Trying to boot from SPI
## Checking hash(es) for config config-1 ... OK
## Checking hash(es) for Image atf-1 ... sha256+ OK
## Checking hash(es) for Image u-boot ... sha256+ OK
## Checking hash(es) for Image fdt-1 ... sha256+ OK
## Checking hash(es) for Image atf-2 ... sha256+ OK
## Checking hash(es) for Image atf-3 ... sha256+ OK
board_spl_was_booted_from: failed to resolve brom_bootdevice_id 0
spl_decode_boot_device: could not find udevice for /mmc@fe330000
spl_decode_boot_device: could not find udevice for /mmc@fe320000
spl_perform_fixups: could not map boot_device to ofpath: -19
Use a static brom_bootsource_id_cache to save the boot source id after
an initial read from SRAM to fix this, this allow spl_perform_fixups()
to resolve correct boot source path for "same-as-spl" after SPL have
loaded TF-A related FIT images into memory.
With this the spl-boot-device prop can correctly be resolved to the
SPI flash node in the control FDT:
=> fdt addr ${fdtcontroladdr}
Working FDT set to f1ee6710
=> fdt list /chosen
chosen {
u-boot,spl-boot-device = "/spi@ff1d0000/flash@0";
stdout-path = "serial2:1500000n8";
u-boot,spl-boot-order = "same-as-spl", "/mmc@fe330000", "/mmc@fe320000";
};
Fixes: d57e16c7e712 ("rockchip: find U-boot proper boot device by inverting the logic that sets it") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Dragan Simic <dsimic@manjaro.org>
* QCM2290 and SM6115 are low and mid range SoCs used on the RB1 and RB2
respectively. SM6115 is also used in some mid-range smartphones/tablets.
Initial support includes buttons and USB (host and gadget).
* SM8250 is a flagship SoC from 2020 used on the RB5, as well as many flagship
smartphones. The board can boot to a U-Boot prompt, but is missing regulators
necessary for USB support.
* SM8550, and SM8650 are flagship mobile SoCs from 2023 and 2024
respectively. Found on many high end smartphones.
In addition:
* Support is added for the Schneider HMIBSC board.
* mach-snapdragon switches to OF_UPSTREAM
* IPQ40xx gets several regressions fixed and some overall cleanup.
* The MSM serial driver gains the ability to generate the bit-clock
automatically, no longer relying on a custom DT property.
* The Qualcomm SMMU driver gets a generic compatible (so per-SoC compatibles
don't need to be added).
* Support for the GENI I2C controller is added.
* The qcom SPMI driver has SPMI v5 support fixed, and v7 support added.
* The qcom sdhci driver gets some fixes for SDCC v5 support.
* SDM845 gains sdcard support
* Support is added for the Synopsys eUSB2 PHY driver (used on SM8550 and SM8650)
* SYS_INIT_SP_BSS_OFFSET is set to 1.5M to give us more space for FDTs.
* RB2 gets a work-around to fix the USB dr_mode property before booting Linux.
Michael Walle [Wed, 6 Mar 2024 16:19:11 +0000 (17:19 +0100)]
board: sl28: move to OF_UPSTREAM
Use the new device devicetree files in dts/upstream/ and delete the old
ones. Still keep the -u-boot.dtsi with all u-boot specifics around.
There is one catch and that is fsl-ls1028a-kontron-sl28-var3.dts which
is not available upstream (yet!). For now, the base dts is used for this
variant as this only differ in the compatible and the (human readable)
model name.
Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Neil Armstrong [Mon, 22 Apr 2024 09:33:52 +0000 (11:33 +0200)]
i2c: Add support for Qualcomm Generic Interface (GENI) I2C controller
Add Support for the Qualcomm Generic Interface (GENI) I2C interface
found on newer Qualcomm SoCs.
The Generic Interface (GENI) is a firmware based Qualcomm Universal
Peripherals (QUP) Serial Engine (SE) Wrapper which can support multiple
bus protocols depending on the firmware type loaded at early boot time
based on system configuration.
It also supports the "I2C Master Hub" which is a single function Wrapper
that only FIFO mode I2C.
It replaces the fixed-function QUP Wrapper found on older SoCs.
The geni-se.h containing the generic GENI Serial Engine registers defines
is imported from Linux.
Only FIFO mode is implemented, neither SE DMA nor GPI DMA are implemented.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
EFI initialisation fails without this, and with proper SMBIOS v3 support
in (and automatic generation of useful tables) there's no reason for us
not to do this on qcom platforms.
mach-snapdragon: implement ft_board_setup() for USB role selection
Some Qualcomm boards have only one USB controller which is muxed between
the type-c port and an internal USB hub for type-A and ethernet. We
modify the DT for these to force them to host mode in U-Boot. However in
Linux DRD role switching is supported (required, even). Use
ft_board_setup() to adjust the dr_mode property for these boards.
While we're here, define pr_fmt for this file so we can more easily
identify log messages.
With the exception of SDM845, most other Qualcomm SoCs have the Qualcomm
specific (but not SoC) specific SMMU compatible string. Add it here so
we can match those without having to add individual SoCs to the list
here.
Neil Armstrong [Fri, 5 Apr 2024 08:21:56 +0000 (10:21 +0200)]
spmi: msm: support controller version 7
Add the defines and support for SPMI arbiters version 7,
which can handle up to 1024 peripherals, and can also drive
a secondary bus which is not implemented yet.
Neil Armstrong [Fri, 5 Apr 2024 08:21:55 +0000 (10:21 +0200)]
spmi: msm: handle peripheral ownership
The cnfg registers provides the owner id for each peripheral,
so we can use this id to check if we're allowed to write register
to each peripherals.
Since the v5 can handle more peripherals, add the max_channels to
scan more starting from version 5, make the channel_map store
32bit values and introduce the SPMI_CHANNEL_READ_ONLY flag to
mark a peripheral as read-only.
Neil Armstrong [Fri, 5 Apr 2024 08:21:54 +0000 (10:21 +0200)]
spmi: msm: properly format command
Since version 2, the cmd format has changed, takes helpers
from Linux driver and use a switch/case to handle all
versions in msm_spmi_write/read() command.
Schneider HMIBSC board dts has already been reviewed upstream on the
linux-arm-msm mailing list. So once it comes through the Linux kernel
release cycle into the U-Boot dts/upstream subtree, a switch to
OF_UPSTREAM can be made. For the time being maintain the U-Boot copy.
SE HMIBSC board uses UART1 as the main debug console, so add
corresponding clocks and pinmux support. Along with that update
instructions to enable clocks for debug UART support.
qcom: Don't enable LINUX_KERNEL_IMAGE_HEADER by default
Enabling LINUX_KERNEL_IMAGE_HEADER by default doesn't allow
ENABLE_ARM_SOC_BOOT0_HOOK to work properly on db410c when U-Boot is
loaded as a first stage bootloader. It leads to secondary CPUs bringup
failure and later causing the Linux kernel to freeze.
So fix it via selectively enabling LINUX_KERNEL_IMAGE_HEADER where it's
actually required.
Robert Marko [Mon, 22 Apr 2024 11:43:28 +0000 (13:43 +0200)]
pinctrl: qcom: ipq4019: support all pin functions
Currently, IPQ4019 pinctrl driver supports only a very limited number of
pin functions and is not fully DT compatible with Linux pinctrl nodes.
IPQ40xx SoC-s sometimes use different pin function numbers for the same
function depending on the pin number, so for example I2C0 on GPIO58 uses
function number 3 while on GPIO59 it uses function number 2.
So, in order to make the driver compatible with upstream DTS to avoid the
need to patch the pinctrl nodes in U-Boot and support all of the missing
pin functions lets rework the driver based on upstream Linux IPQ4019
pinctrl driver and the pending SM8150 U-Boot pinctrl driver which also uses
different function numbers pased on the exact pin number.
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Robert Marko [Mon, 22 Apr 2024 11:43:27 +0000 (13:43 +0200)]
pinctrl: qcom: ipq4019: enable DM_FLAG_PRE_RELOC
If compiled with logging and debug UART support, the following is printed:
serial_msm serial@78af000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19
This is due to the fact that IPQ4019 pinctrl driver is not available prior
to relocation and thus MSM serial will fail probing as pinctrl provider is
not available.
So, lets enable DM_FLAG_PRE_RELOC for IPQ4019 pinctrl to fix this.
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Robert Marko [Mon, 22 Apr 2024 11:43:24 +0000 (13:43 +0200)]
pinctrl: qcom: allow selecting with ARCH_IPQ40XX
IPQ4019 pinctrl driver was moved to the dedicated Qualcomm pinctrl
directory, but the KConfig depends on ARCH_SNAPDRAGON only and thus
PINCTRL_QCOM_IPQ4019 cannot be selected when ARCH_IPQ40XX is used.
Fixes: 24d2908e987a ("pinctrl: qcom: move ipq4019 driver from mach-ipq40xx") Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
The driver currently requires the bit clock divider be hardcoded in
devicetree (or use the hardcoded default from apq8016).
The bit clock divider is used to derive the baud rate from the core
clock:
baudrate = clk_rate / csr_div
clk_rate is the actual programmed core clock rate which is returned by
clk_set_rate(), and this UART driver only supports a baudrate of 115200.
We can therefore determine the appropriate value for UARTDM_CSR by
iterating over the possible values and finding the one where the
equation above holds true for a baudrate of 115200.
Implement this logic and drop the non-standard DT bindings for this
driver.
Tested on dragonboard410c.
Tested-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
clk/qcom: ipq4019: return valid rate when setting UART clock
clk_set_rate() should return the clock rate that was set. The IPQ4019
clock driver doesn't set any rates yet but it should still return the
expected value so that drivers can work properly.
For a baud rate of 115200 with an expected bit clock divisor of 16, the
clock rate should be 1843200 so return that frequency.
clk/qcom: apq8016: return valid rate when setting UART clock
The clk_init_uart() helper always returns 0, but we're meant to return a
real clock rate. Given that we hardcode 115200 baud, just return the
clock rate that we set.
Robert Marko [Mon, 15 Apr 2024 10:49:26 +0000 (12:49 +0200)]
serial: msm_serial: remove .clk_rate from debug UART
MSM serial in DEBUG UART mode is trying to set .clk_rate, but the
msm_serial_data structure does not have such property at all, so lets
remove it as otherwise it will fail compiling.
Fixes: 90023bdfe979 ("serial: msm: add debug UART") Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
mach-snapdragon: Allow other board vendors apart from Qcom
Qcom SoCs derived boards can come from various OEMs/ODMs and not just
Qcom itself. So allow CONFIG_SYS_VENDOR to be set correctly
corressponding to the actual board vendor.
Neil Armstrong [Thu, 4 Apr 2024 16:46:39 +0000 (18:46 +0200)]
clk: qcom: Add SM8650 clock driver
Add the GCC and TCSRCC clock driver for the SM8650 SoC.
The GCC driver uses the clk-qcom infrastructure to support GDSCs,
Resets and gates. While the TCSRCC is a simpler clock driver which
only supports gates.
The GCC enable and set_rate callbacks contains some tweaks to
setup clocks for Debug UART, SDCard controller and USB.
The TCSRCC gates returns the XO frequency, which is used by the
Synopsys eUSB2 driver to determine the PHY configuration.
Neil Armstrong [Thu, 4 Apr 2024 16:46:38 +0000 (18:46 +0200)]
clk: qcom: Add SM8550 clock driver
Add the GCC and TCSRCC clock driver for the SM8550 SoC.
The GCC driver uses the clk-qcom infrastructure to support GDSCs,
Resets and gates. While the TCSRCC is a simpler clock driver which
only supports gates.
The GCC enable and set_rate callbacks contains some tweaks to
setup clocks for Debug UART, SDCard controller and USB.
The TCSRCC gates returns the XO frequency, which is used by the
Synopsys eUSB2 driver to determine the PHY configuration.
mmc: msm_sdhci: use a more sensible default clock rate
We currently default to the lowest rate but this actually doesn't work
on most platforms. Default to the HS400 speed instead which is most
common on Qualcomm platforms.
mmc: msm_sdhci: correct vendor_spec_cap0 register for v5
The V4 and V5 controllers have quite varied register layouts. Inherit
the register offsets and naming from the Linux driver. More version
specific offsets can be inherited from Linux as needed.
Fixes: 364c22a ("mmc: msm_sdhci: Add SDCC version 5.0.0 support") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
projects / u-boot.git / log
