Tony Dinh [Thu, 6 Jun 2024 00:12:01 +0000 (17:12 -0700)]
arm: mvebu: env_sf_get_env_addr() missing check for CONFIG_ENV_IS_IN_SPI_FLASH
The CONFIG_ENV_OFFSET is undefined if boot device is UART
(CONFIG_MVEBU_SPL_BOOT_DEVICE_UART), or envs are not stored on flash
(CONFIG_ENV_IS_NOWHERE). Check for CONFIG_ENV_IS_IN_SPI_FLASH as the first
condition to determine whether env_sf_get_env_addr() should be provided.
Tom Rini [Fri, 5 Jul 2024 22:36:43 +0000 (16:36 -0600)]
Merge branch '2024-07-05-assorted-updates'
- Re-instate the zlib update, so we can fix it for this release,
assorted whitespace cleanups, allow mkimage to 'auto-conf' signing of
scripts, enhance ELF image support, add more HW rev support to e1000
driver, update am64x_evm config, correct mpc8xxx watchdog, update
phycore-am6 docs.
Christophe Leroy [Thu, 27 Jun 2024 08:26:08 +0000 (10:26 +0200)]
watchdog: mpc8xxx: Fix timer value
Timer value is a 16 bits calculated from the wanted timeout and the
system clock. On powerpc/8xx, a timeout of 2s gives a value which
is over U16_MAX so U16_MAX shall be used. But the calculation is
casted to u16 so at the end the result is 63770 instead of 128906.
So the timer gets loaded with 63770 instead of 65535. It is not
a big difference in that case, but lets make the code correct and
cast to u32 instead of u16.
Fixes: 26e8ebcd7cb7 ("watchdog: mpc8xxx: Make it generic") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Maxim Moskalets [Fri, 21 Jun 2024 11:42:10 +0000 (14:42 +0300)]
cmd: bootm: add ELF file support
Some operating systems (e.g. seL4) and embedded applications are ELF
images. It is convenient to use FIT-images to implement trusted boot.
Added "elf" image type for booting using bootm command.
Alexander Dahl [Thu, 20 Jun 2024 14:20:59 +0000 (16:20 +0200)]
mkimage: Allow 'auto-conf' signing of scripts
U-Boot configured for verified boot with the "required" option set to
"conf" also checks scripts put in FIT images for a valid signature, and
refuses to source and run such a script if the signature for the
configuration is bad or missing. Such a script could not be packaged
before, because mkimage failed like this:
% tools/mkimage -T script -C none -d tmp/my.scr -f auto-conf -k tmp -g dev -o sha256,rsa4096 my.uimg
Failed to find any images for configuration 'conf-1/signature'
tools/mkimage Can't add hashes to FIT blob: -1
Error: Bad parameters for FIT image type
This is especially unfortunate if LEGACY_IMAGE_FORMAT is disabled as
recommended.
Listing the script configuration in a "sign-images" subnode instead,
would have added even more complexity to the already complex auto fit
generation code.
Tom Rini [Fri, 5 Jul 2024 16:22:53 +0000 (10:22 -0600)]
Merge branch 'qcom-main' of https://source.denx.de/u-boot/custodians/u-boot-snapdragon
Various minor fixes and improvements:
* Fix Qualcomm SPMI v5 support
* Move default environment to a file
* Add support for special pins (e.g ufs/mmc reset/data pins)
* IPQ moves to OF_UPSTREAM and receives some cleanup and MAINTAINERS
changes
* Add a reset driver for devices without PSCI
* msm8916 USB clock improvements for mobile devices
Tom Rini [Fri, 5 Jul 2024 14:09:23 +0000 (08:09 -0600)]
Merge branch 'staging' of https://source.denx.de/u-boot/custodians/u-boot-tegra
Branch contains minor improvemets for existing tegra devices along
with bring up of 4 new devices (ASUS Transformers T20, Microsoft
Surface RT, Lenovo Ideapad Yoga 11 and WEXLER Tab 7t).
Caleb Connolly [Mon, 24 Jun 2024 02:23:29 +0000 (04:23 +0200)]
spmi: msm: correct max_channels for v5 controllers
Commit ee1d8aa5ecf7 ("spmi: msm: support controller version 7") broke
support for channels > 128 on v5 controllers, resulting in some
peripherals (like the power button / pon) working but others (like
gpios) reading bogus data.
Correct max_channels for v5 controllers.
Fixes: ee1d8aa5ecf7 ("spmi: msm: support controller version 7") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
In order to help setup pin configuration for special pins (UFS, SDCard),
introduce the msm_special_pin_data struct largely inspired from the
Linux conterpart but with only U-Boot required fields.
This struct is added to the pins_data to allow specifying the special
pins data for each SoC.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Sam Day [Mon, 6 May 2024 10:26:54 +0000 (10:26 +0000)]
clk/qcom: apq8016: add support for USB_HS clocks
The newer "register map for simple gate clocks" support added for qcom
clocks is used. As a result gcc_apq8016 now has a mixture of the old and
new styles. I didn't (and still don't!) feel comfortable enough in this
area to update the existing code.
Signed-off-by: Sam Day <me@samcday.com> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Tue, 7 May 2024 18:46:54 +0000 (18:46 +0000)]
qcom_defconfig: enable msm8916 and msm8996
Enable the clock/pinctrl drivers for these two SoCs. Previously left out
due to only being used on the db410c and db820c respectively which both
have their own board code. We can still boot these with most features
working without that board code.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Sam Day <me@samcday.com>
Jonas Schwöbel [Sat, 2 Apr 2022 20:04:00 +0000 (22:04 +0200)]
board: lenovo: ideapad-yoga-11: add Lenovo Ideapad Yoga 11 support
The Lenovo IdeaPad Yoga 11 is a hybrid laptop/tablet Windows RT-based
computer released in late 2012. The device uses a 1.3 GHz quad-core
Nvidia Tegra 3 chipset with 2 GB of RAM, features a 11.6 inch 1366x768
screen and 32/64 GB of internal memory that can be supplemented with
a microSDXC card slot, full size SD card slot and 2 full size USB 2.0
ports.
Jonas Schwöbel [Mon, 24 Jan 2022 17:06:33 +0000 (18:06 +0100)]
board: microsoft: surface-rt: add Microsoft Surface RT support
Surface RT is a hybrid tablet computer developed and manufactured
by Microsoft and shipped with Windows RT. The tablet uses a 1.3 GHz
quad-core Nvidia Tegra 3 chipset with 2 GB of RAM, features 10.8
inch 1366x768 screen and 32/64 GB of internal memory that can be
supplemented with a microSDXC card giving up to 200 GB of
additional storage.
WEXLER Tab 7t is a mini tablet computer developed by WEXLER that
runs the Android operating system. The device features a 7.0-inch
(180 mm) HD display, an Nvidia Tegra 3 quad-core chip, 1 GB of RAM,
8, 16 or 32 GB of storage that can be supplemented with a microSDXC
card giving up to 64 GB of additional storage and a full size USB
port.
Tested-by: Maksim Kurnosenko <asusx2@mail.ru> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Svyatoslav Ryhel [Thu, 27 Jan 2022 17:42:04 +0000 (19:42 +0200)]
board: asus: transformer: add ASUS Transformer T20 family support
The Asus Eee Pad Transformer family are 2-in-1 detachable/slider
tablets developed by Asus that run the Android operating system.
The Eee Pad Transformers feature a 10.1-inch (260 mm) display,
an Nvidia Tegra 2 dual-core chip, 1 GB of RAM, and 16/32 GB of storage.
Transformers board derives from Nvidia Ventana development board.
This patch brings support for all 3 known T20 Transformers:
- Asus Eee Pad Transformer TF101
- Asus Eee Pad Transformer TF101G
- Asus Eee Pad Slider SL101
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> # ASUS TF101 Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Svyatoslav Ryhel [Tue, 18 Jun 2024 10:07:57 +0000 (13:07 +0300)]
include: configs: tegra-common-post: make usb first boot target
This ensures that the device can boot from a USB device prior to MMC. Useful
cases are when installing a new OS from USB while MMC still has a working OS
configuration or if the OS configuration is broken in late boot stages
(kernel boots but the system does not start).
Tom Rini [Thu, 4 Jul 2024 22:11:08 +0000 (16:11 -0600)]
Merge patch series "xtensa: Enable qemu-xtensa board"
Jiaxun Yang <jiaxun.yang@flygoat.com> says:
Hi all,
This series enabled qemu-xtensa board.
For dc232b CPU it needs to be built with toolchain[1].
This is a side product of me investigating architectures
physical address != virtual address in U-Boot. Now we can
get it covered under CI and regular tests.
VirtIO devices are not working as expected, due to U-Boot's
assumption on VA == PA everywhere, I'm going to get this fixed
later.
My Xtensa knowledge is pretty limited, Xtensa people please
feel free to point out if I got anything wrong.
Tom Rini [Thu, 27 Jun 2024 13:43:20 +0000 (07:43 -0600)]
CI: Make pytest export JUnitXML
Both GitLab and Azure (and other CI systems) have native support for
displaying JUnitXML test report results. The pytest framework that we
use can generate these reports. Change our CI tests so that they will
generate these reports and then have the respective CI platform pick
them up. We write to different locations because of where each CI is
(and isn't) able to easily pass things along.
Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 18 Jun 2024 20:23:43 +0000 (14:23 -0600)]
test/py/tests: Update some network dependencies
On tests which require "tftpboot" we need to depend not on cmd_net but
rather cmd_tftpboot. And on tests which require cmd_pxe we do not need
to also depend on cmd_net as this should be handled already via Kconfig
logic.
Simon Glass [Sun, 23 Jun 2024 20:30:33 +0000 (14:30 -0600)]
smbios: Correct error handling when writing tables
Since write_smbios_table() returns an address, we cannot use it to
return and error number. Also, failing on sysinfo_detect() breaks
existing boards, e.g. chromebook_link
Correct this by logging and swallowing the error.
Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: a5a57562856 ("lib: smbios: Detect system properties via...")
Simon Glass [Sun, 23 Jun 2024 20:30:30 +0000 (14:30 -0600)]
test: Decode exceptions only with sandbox
When a real board fails we don't want to decode the exception. Reserve
that behaviour for sandbox. Also avoid raising a new exception on
failure - just re-raise the existing one.
Simon Glass [Sun, 23 Jun 2024 20:30:27 +0000 (14:30 -0600)]
test: Make bootstd init run only on sandbox
Tests for standard boot need disks to be set up, which can only be done
on sandbox, since adjusting disks on real hardware is not currently
supported. Mark the init function as sandbox-only.
Tom Rini [Wed, 3 Jul 2024 20:44:12 +0000 (14:44 -0600)]
Merge patch series "cmd: avoid duplicate weak functions"
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
[trini: Patch 1/3 was replaced by my series merged just prior to this,
Heinrich's cover letter is lightly edited and any mistakes are my own]
If we have multiple weak implementations of functions, the linker might
choose any of these.
The EFI sub-systems uses invalidate_icache_all() after loading binaries.
Both the EFI sub-system and cmd/cache.c provide a weak
invalidate_icache_all() function. Remove the EFI instance.
For ARM11 functional implementation of invalidate_icache_all is missing.
Add it.
If multiple weak implementations of a weak function exist, it is unclear
which one the linker should chose. cmd/cache.c already defines a weak
invalidate_icache_all().
We don't need a call to invalidate_icache_all() on x86.
ARM, RISC-V, and Sandbox provide an implementation.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
In EFI sub-system we rely on invalidate_icache_all() to invalidate the
instruction cache after loading binaries. Add the missing implementation on
ARM1136, ARM1176.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tom Rini [Wed, 3 Jul 2024 20:42:11 +0000 (14:42 -0600)]
Merge patch series "m68k: Implement a default flush_dcache_all"
Tom Rini <trini@konsulko.com> says:
Prior to this series we had some de-facto required cache functions that
were either unimplemented on some architectures or differently named.
This would lead in some cases to having multiple "weak" functions
available as well. Rework things so that an architecture must provide
these functions and it is up to that architecture if a "weak" default
function makes sense, or not.
Tom Rini [Wed, 19 Jun 2024 21:27:59 +0000 (15:27 -0600)]
cmd: cache: Remove weak functions
It should be up to an architecture to decide how to implement cache
functions, and if they need to use weak functions or not. Allowing the
cache command to be built without cache functionality implemented is
unhelpful. Further, guard the call to noncached_set_region with
CONFIG_SYS_NONCACHED_MEMORY as that's when it's implemented and again is
an architecture specific detail.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 19 Jun 2024 21:27:57 +0000 (15:27 -0600)]
powerpc: Implement a default flush_dcache_all
Implement a weak default version of flush_dcache_all which is based on
the ARM default, which is to flush the entire range via
flush_dcache_range(...).
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 19 Jun 2024 21:27:55 +0000 (15:27 -0600)]
sh: Implement a default flush_dcache_all
Implement a weak default version of flush_dcache_all which is based on
the ARM default, which is to flush the entire range via
flush_dcache_range(...).
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 19 Jun 2024 21:27:53 +0000 (15:27 -0600)]
m68k: Implement a default flush_dcache_all
Implement a weak default version of flush_dcache_all which is based on
the ARM default, which is to flush the entire range via
flush_dcache_range(...).
Vincent Stehlé [Thu, 27 Jun 2024 17:06:29 +0000 (19:06 +0200)]
bootstd: cros: store partition type in an efi_guid_t
The scan_part() function uses a struct uuid to store the little-endian
partition type GUID, but this structure should be used only to contain a
big-endian UUID. Use an efi_guid_t instead.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sun, 23 Jun 2024 17:56:21 +0000 (11:56 -0600)]
u_boot_pylib: Use correct coverage tool within venv
When running within a Python venv we must use the 'coverage' tool (which
is within the venv) so that the venv packages are used in preference to
system packages. Otherwise the coverage tests run in a different
environment from the normal tests and may fail due to missing packages.
Handle this by detecting the venv and changing the tool name.
Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Simon Glass [Sun, 23 Jun 2024 17:55:15 +0000 (11:55 -0600)]
buildman: Add a way to limit the number of buildmans
Buildman uses all available CPUs by default, so running more than one or
two concurrent processes is not normally useful.
However in some CI cases we want to be able to run several jobs at once
to save time. For example, in a lab situation we may want to run a test
on 20 boards at a time, since only the build step actually takes much
CPU.
Add an option which allows such a limit. When buildman starts up, it
waits until the number of running processes goes below the limit, then
claims a spot in the list. The list is maintained with a temporary file.
Note that the temp file is user-specific, since it is hard to create a
locked temporary file which can be accessed by any user. In most cases,
only one user is running jobs on a machine, so this should not matter.
Simon Glass [Sun, 23 Jun 2024 17:55:13 +0000 (11:55 -0600)]
buildman: Add a flag to force mrproper on failure
When a file is removed by a commit (e.g. include/common.h yay!) it can
cause incremental build failures since one of the dependency files from
a previous build may mention the file.
Add an option to run 'make mrproper' automatically when a build fails.
This can be used to automatically resolve the problem, without always
adding the large overhead of 'make mrproper' to every build.
projects / u-boot.git / log
