From: Hans de Goede <hdegoede@redhat.com>
Date: Wed, 24 Dec 2014 11:17:07 +0000 (+0100)
Subject: sunxi: video: Add support for VGA via external DACs connected to the LCD pins
X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=e2bbdfb1e3a3def3586703622a4dade46019f943;p=u-boot.git

sunxi: video: Add support for VGA via external DACs connected to the LCD pins

Add support for external DACs connected to the parallel LCD interface driving
a VGA connector, such as found on the Olimex A13 boards.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
---

diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 61b4959576..5959577749 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -294,6 +294,15 @@ config VIDEO_HDMI
 	---help---
 	Say Y here to add support for outputting video over HDMI.
 
+config VIDEO_VGA_VIA_LCD
+	boolean "VGA via LCD controller support"
+	depends on VIDEO
+	default n
+	---help---
+	Say Y here to add support for external DACs connected to the parallel
+	LCD interface driving a VGA connector, such as found on the
+	Olimex A13 boards.
+
 config VIDEO_LCD_MODE
 	string "LCD panel timing details"
 	depends on VIDEO
diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c
index 98ff94245d..e01c8f5b2c 100644
--- a/drivers/video/sunxi_display.c
+++ b/drivers/video/sunxi_display.c
@@ -767,6 +767,12 @@ static void sunxi_mode_set(const struct ctfb_res_modes *mode,
 		sunxi_lcdc_backlight_enable();
 		break;
 	case sunxi_monitor_vga:
+#ifdef CONFIG_VIDEO_VGA_VIA_LCD
+		sunxi_composer_mode_set(mode, address);
+		sunxi_lcdc_tcon0_mode_set(mode);
+		sunxi_composer_enable();
+		sunxi_lcdc_enable();
+#endif
 		break;
 	}
 }
@@ -808,6 +814,8 @@ void *video_hw_init(void)
 	hpd = video_get_option_int(options, "hpd", 1);
 	edid = video_get_option_int(options, "edid", 1);
 	sunxi_display.monitor = sunxi_monitor_dvi;
+#elif defined CONFIG_VIDEO_VGA_VIA_LCD
+	sunxi_display.monitor = sunxi_monitor_vga;
 #else
 	sunxi_display.monitor = sunxi_monitor_lcd;
 #endif
@@ -860,8 +868,13 @@ void *video_hw_init(void)
 		printf("LCD not supported on this board\n");
 		return NULL;
 	case sunxi_monitor_vga:
+#ifdef CONFIG_VIDEO_VGA_VIA_LCD
+		sunxi_display.depth = 18;
+		break;
+#else
 		printf("VGA not supported on this board\n");
 		return NULL;
+#endif
 	}
 
 	if (mode->vmode != FB_VMODE_NONINTERLACED) {
@@ -914,6 +927,7 @@ int sunxi_simplefb_setup(void *blob)
 		pipeline = "de_be0-lcd0";
 		break;
 	case sunxi_monitor_vga:
+		pipeline = "de_be0-lcd0";
 		break;
 	}