From: Parthiban Nallathambi Date: Mon, 4 Nov 2019 18:50:07 +0000 (+0100) Subject: imx: sync with kernel device tree for Phycore SoM X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=d98929d63681be6e76653ca05297f3ca46121da1;p=u-boot.git imx: sync with kernel device tree for Phycore SoM Sync the Linux Kernel 5.4-rc6 device tree for Phytec Phycore SoM and Segin board based on imx6UL and imx6ULL. Changes includes Phytec naming convention for the devicetree files. Signed-off-by: Parthiban Nallathambi Acked-by: Peng Fan --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 97504e36a8..88b2bf452a 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -663,14 +663,14 @@ dtb-$(CONFIG_MX6UL) += \ imx6ul-9x9-evk.dtb \ imx6ul-9x9-evk.dtb \ imx6ul-liteboard.dtb \ - imx6ul-phycore-segin.dtb \ + imx6ul-phytec-segin-ff-rdk-nand.dtb \ imx6ul-pico-hobbit.dtb \ imx6ul-pico-pi.dtb dtb-$(CONFIG_MX6ULL) += \ imx6ull-14x14-evk.dtb \ imx6ull-colibri.dtb \ - imx6ull-phycore-segin.dtb \ + imx6ull-phytec-segin-ff-rdk-emmc.dtb \ imx6ull-dart-6ul.dtb \ imx6ulz-14x14-evk.dtb diff --git a/arch/arm/dts/imx6ul-phycore-segin.dts b/arch/arm/dts/imx6ul-phycore-segin.dts deleted file mode 100644 index 7d68bf8430..0000000000 --- a/arch/arm/dts/imx6ul-phycore-segin.dts +++ /dev/null @@ -1,81 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2018 Collabora Ltd. - * - * Based on dts[i] from Phytec barebox port: - * Copyright (C) 2016 PHYTEC Messtechnik GmbH - * Author: Christian Hemp - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/dts-v1/; - -#include "imx6ul.dtsi" -#include "pcl063-common.dtsi" - -/ { - model = "Phytec phyBOARD-i.MX6UL-Segin SBC"; - compatible = "phytec,phyboard-imx6ul-segin", "phytec,imx6ul-pcl063", - "fsl,imx6ul"; -}; - -&gpmi { - status = "okay"; -}; - -&i2c1 { - i2c_rtc: rtc@68 { - compatible = "microcrystal,rv4162"; - reg = <0x68>; - status = "okay"; - }; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - uart-has-rtscts; - status = "okay"; -}; - -&usbotg1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg1_id>; - dr_mode = "otg"; - srp-disable; - hnp-disable; - adp-disable; - status = "okay"; -}; - -&usbotg2 { - dr_mode = "host"; - disable-over-current; - status = "okay"; -}; - -&iomuxc { - pinctrl-names = "default"; - - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 - MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 - MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1 - MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1 - >; - }; - - pinctrl_usb_otg1_id: usbotg1idgrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 - >; - }; - -}; diff --git a/arch/arm/dts/pcl063-common.dtsi b/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi similarity index 56% rename from arch/arm/dts/pcl063-common.dtsi rename to arch/arm/dts/imx6ul-phytec-phycore-som.dtsi index b88dde2fb0..c2a7c78779 100644 --- a/arch/arm/dts/pcl063-common.dtsi +++ b/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi @@ -1,22 +1,35 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2018 Collabora Ltd. - * - * Based on dts[i] from Phytec barebox port: * Copyright (C) 2016 PHYTEC Messtechnik GmbH * Author: Christian Hemp */ +#include +#include +#include + / { - model = "Phytec phyCORE-i.MX6 Ultra Lite SOM"; + model = "PHYTEC phyCORE-i.MX6 UltraLite"; compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul"; + chosen { + stdout-path = &uart1; + }; + memory { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; - chosen { - stdout-path = &uart1; + gpio_leds_som: leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpioleds_som>; + compatible = "gpio-leds"; + + phycore-green { + gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; }; }; @@ -24,16 +37,21 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; phy-mode = "rmii"; - phy-handle = <ðphy0>; - status = "okay"; + phy-handle = <ðphy1>; + status = "disabled"; mdio: mdio { #address-cells = <1>; #size-cells = <0>; - ethphy0: ethernet-phy@1 { + ethphy1: ethernet-phy@1 { reg = <1>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + status = "disabled"; }; }; }; @@ -42,89 +60,61 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpmi_nand>; nand-on-flash-bbt; - fsl,no-blockmark-swap; status = "disabled"; - - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x0 0x400000>; - }; - - partition@400000 { - label = "uboot-env"; - reg = <0x400000 0x100000>; - }; - - partition@500000 { - label = "root"; - reg = <0x500000 0x0>; - }; }; &i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default", "gpio"; + pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; - pinctrl-1 = <&pinctrl_i2c1_gpio>; - scl-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + clock-frequency = <100000>; status = "okay"; eeprom@52 { - compatible = "cat,24c32"; + compatible = "catalyst,24c32", "atmel,24c32"; reg = <0x52>; }; }; -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; +&snvs_poweroff { status = "okay"; }; -&usdhc1 { +&uart1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; - bus-width = <0x4>; - pinctrl-0 = <&pinctrl_usdhc1>; - no-1-8-v; + pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &usdhc2 { - u-boot,dm-spl; - u-boot,dm-pre-reloc; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <8>; no-1-8-v; non-removable; - keep-power-in-suspend; status = "disabled"; }; &iomuxc { - pinctrl-names = "default"; - pinctrl_enet1: enet1grp { fsl,pins = < - MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 - MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x10010 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x10010 MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b010 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b010 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b010 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b010 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x17059 >; }; + pinctrl_gpioleds_som: gpioledssomgrp { + fsl,pins = ; + }; + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x0b0b1 @@ -147,35 +137,15 @@ pinctrl_i2c1: i2cgrp { fsl,pins = < - MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 - MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 - >; - }; - - pinctrl_i2c1_gpio: i2c1grp_gpio { - fsl,pins = < - MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x1b8b0 - MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x1b8b0 + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 >; }; pinctrl_uart1: uart1grp { fsl,pins = < - MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 - MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 - MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 - + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 >; }; @@ -191,7 +161,7 @@ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9 MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9 MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9 - MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x170f9 >; }; + }; diff --git a/arch/arm/dts/imx6ul-phytec-segin-ff-rdk-nand.dts b/arch/arm/dts/imx6ul-phytec-segin-ff-rdk-nand.dts new file mode 100644 index 0000000000..699dfcbf9a --- /dev/null +++ b/arch/arm/dts/imx6ul-phytec-segin-ff-rdk-nand.dts @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 PHYTEC Messtechnik GmbH + * Author: Christian Hemp + */ + +/dts-v1/; +#include "imx6ul.dtsi" +#include "imx6ul-phytec-phycore-som.dtsi" +#include "imx6ul-phytec-segin.dtsi" +#include "imx6ul-phytec-segin-peb-eval-01.dtsi" + +/ { + model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND"; + compatible = "phytec,imx6ul-pbacd10-nand", "phytec,imx6ul-pbacd10", + "phytec,imx6ul-pcl063", "fsl,imx6ul"; +}; + +&adc1 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&tlv320 { + status = "okay"; +}; + +&ecspi3 { + status = "okay"; +}; + +ðphy1 { + status = "okay"; +}; + +ðphy2 { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&fec2 { + status = "okay"; +}; + +&gpmi { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +®_can1_en { + status = "okay"; +}; + +®_sound_1v8 { + status = "okay"; +}; + +®_sound_3v3 { + status = "okay"; +}; + +&sai2 { + status = "okay"; +}; + +&sound { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usbotg2 { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; diff --git a/arch/arm/dts/imx6ul-phytec-segin-peb-eval-01.dtsi b/arch/arm/dts/imx6ul-phytec-segin-peb-eval-01.dtsi new file mode 100644 index 0000000000..2f3fd32a11 --- /dev/null +++ b/arch/arm/dts/imx6ul-phytec-segin-peb-eval-01.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 PHYTEC Messtechnik + * Author: Christian Hemp + */ + +#include + +/ { + gpio_keys: gpio-keys { + compatible = "gpio-key"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + status = "disabled"; + + power { + label = "Power Button"; + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + }; + }; + + user_leds: user-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_user_leds>; + status = "disabled"; + + user-led1 { + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "on"; + }; + + user-led2 { + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "on"; + }; + }; +}; + +&iomuxc { + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x79 + >; + }; + + pinctrl_user_leds: user_ledsgrp { + fsl,pins = < + MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x79 + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x79 + >; + }; +}; diff --git a/arch/arm/dts/imx6ul-phytec-segin.dtsi b/arch/arm/dts/imx6ul-phytec-segin.dtsi new file mode 100644 index 0000000000..8d5f8dc6ad --- /dev/null +++ b/arch/arm/dts/imx6ul-phytec-segin.dtsi @@ -0,0 +1,346 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 PHYTEC Messtechnik GmbH + * Author: Christian Hemp + */ + +/ { + model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite"; + compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", "fsl,imx6ul"; + + aliases { + rtc0 = &i2c_rtc; + rtc1 = &snvs_rtc; + }; + + reg_sound_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "i2s-audio-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + status = "disabled"; + }; + + reg_sound_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "i2s-audio-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + status = "disabled"; + }; + + reg_can1_en: regulator-can1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&princtrl_flexcan1_en>; + regulator-name = "Can"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_adc1_vref_3v3: regulator-vref-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vref-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker"; + simple-audio-card,routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "Speaker", "SPOP", + "Speaker", "SPOM", + "LINE1L", "Line In", + "LINE1R", "Line In"; + status = "disabled"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&tlv320>; + clocks = <&clks IMX6UL_CLK_SAI2>; + }; + }; + +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; + vref-supply = <®_adc1_vref_3v3>; + /* + * driver can not separate a specific channel so we request 4 channels + * here - we need only the fourth channel + */ + num-channels = <4>; + status = "disabled"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_en>; + status = "disabled"; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <786432000>; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; + status = "disabled"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rmii"; + phy-handle = <ðphy2>; + status = "disabled"; +}; + +&i2c1 { + tlv320: codec@18 { + compatible = "ti,tlv320aic3007"; + #sound-dai-cells = <0>; + reg = <0x18>; + AVDD-supply = <®_sound_3v3>; + IOVDD-supply = <®_sound_3v3>; + DRVDD-supply = <®_sound_3v3>; + DVDD-supply = <®_sound_1v8>; + status = "disabled"; + }; + + stmpe: touchscreen@44 { + compatible = "st,stmpe811"; + reg = <0x44>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_stmpe>; + status = "disabled"; + + touchscreen { + compatible = "st,stmpe-ts"; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <1>; + st,touch-det-delay = <2>; + st,settling = <2>; + st,fraction-z = <7>; + st,i-drive = <1>; + touchscreen-inverted-x = <1>; + touchscreen-inverted-y = <1>; + }; + }; + + i2c_rtc: rtc@68 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_int>; + compatible = "microcrystal,rv4162"; + reg = <0x68>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + status = "disabled"; + }; +}; + +&mdio { + ethphy2: ethernet-phy@2 { + reg = <2>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; + status = "disabled"; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "disabled"; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>, + <&clks IMX6UL_CLK_SAI2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <19200000>; + fsl,sai-mclk-direction-output; + status = "disabled"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + uart-has-rtscts; + status = "disabled"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + dr_mode = "otg"; + status = "disabled"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "disabled"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "disabled"; +}; + +&iomuxc { + pinctrl_adc1: adc1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x10b0 + MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0 + MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0 + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b010 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b010 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b010 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b010 + >; + }; + + pinctrl_flexcan1: flexcan1 { + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 + >; + }; + + princtrl_flexcan1_en: flexcan1engrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0 + >; + }; + + pinctrl_rtc_int: rtcintgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 + MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 + >; + }; + + pinctrl_stmpe: stmpegrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 + MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1 + MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; +}; diff --git a/arch/arm/dts/imx6ull-phycore-segin.dts b/arch/arm/dts/imx6ull-phycore-segin.dts deleted file mode 100644 index 6df3ad2e4a..0000000000 --- a/arch/arm/dts/imx6ull-phycore-segin.dts +++ /dev/null @@ -1,70 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2019 Parthiban Nallathambi - */ - -/dts-v1/; - -#include "imx6ull.dtsi" -#include "pcl063-common.dtsi" - -/ { - model = "Phytec phyBOARD-i.MX6ULL-Segin SBC"; - compatible = "phytec,phyboard-imx6ull-segin", "phytec,imx6ull-pcl063", - "fsl,imx6ull"; -}; - -&i2c1 { - i2c_rtc: rtc@68 { - compatible = "microcrystal,rv4162"; - reg = <0x68>; - status = "okay"; - }; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - uart-has-rtscts; - status = "okay"; -}; - -&usdhc2 { - status = "okay"; -}; - -&usbotg1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg1_id>; - dr_mode = "otg"; - srp-disable; - hnp-disable; - adp-disable; - status = "okay"; -}; - -&usbotg2 { - dr_mode = "host"; - disable-over-current; - status = "okay"; -}; - -&iomuxc { - pinctrl-names = "default"; - - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 - MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 - MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1 - MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1 - >; - }; - - pinctrl_usb_otg1_id: usbotg1idgrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 - >; - }; - -}; diff --git a/arch/arm/dts/imx6ull-phytec-phycore-som.dtsi b/arch/arm/dts/imx6ull-phytec-phycore-som.dtsi new file mode 100644 index 0000000000..56cd16e5a7 --- /dev/null +++ b/arch/arm/dts/imx6ull-phytec-phycore-som.dtsi @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 PHYTEC Messtechnik GmbH + * Author: Stefan Riedmueller + */ + +#include "imx6ul-phytec-phycore-som.dtsi" + +/ { + model = "PHYTEC phyCORE-i.MX6 ULL"; + compatible = "phytec,imx6ull-pcl063", "fsl,imx6ull"; +}; + +&iomuxc { + /delete-node/ gpioledssomgrp; +}; + +&iomuxc_snvs { + pinctrl_gpioleds_som: gpioledssomgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0 + >; + }; +}; diff --git a/arch/arm/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts b/arch/arm/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts new file mode 100644 index 0000000000..9648d4ecaf --- /dev/null +++ b/arch/arm/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 PHYTEC Messtechnik GmbH + * Author: Stefan Riedmueller + */ + +/dts-v1/; +#include "imx6ull.dtsi" +#include "imx6ull-phytec-phycore-som.dtsi" +#include "imx6ull-phytec-segin.dtsi" +#include "imx6ull-phytec-segin-peb-eval-01.dtsi" + +/ { + model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with eMMC"; + compatible = "phytec,imx6ull-pbacd10-emmc", "phytec,imx6ull-pbacd10", + "phytec,imx6ull-pcl063","fsl,imx6ull"; +}; + +&adc1 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&tlv320 { + status = "okay"; +}; + +&ecspi3 { + status = "okay"; +}; + +ðphy1 { + status = "okay"; +}; + +ðphy2 { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&fec2 { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +®_can1_en { + status = "okay"; +}; + +®_sound_1v8 { + status = "okay"; +}; + +®_sound_3v3 { + status = "okay"; +}; + +&sai2 { + status = "okay"; +}; + +&sound { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usbotg2 { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; + +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm/dts/imx6ull-phytec-segin-peb-eval-01.dtsi b/arch/arm/dts/imx6ull-phytec-segin-peb-eval-01.dtsi new file mode 100644 index 0000000000..ff08d95a1a --- /dev/null +++ b/arch/arm/dts/imx6ull-phytec-segin-peb-eval-01.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 PHYTEC Messtechnik GmbH + * Author: Stefan Riedmueller + */ + +#include "imx6ul-phytec-segin-peb-eval-01.dtsi" + +&iomuxc { + /delete-node/ gpio_keysgrp; +}; + +&iomuxc_snvs { + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x79 + >; + }; +}; diff --git a/arch/arm/dts/imx6ull-phytec-segin.dtsi b/arch/arm/dts/imx6ull-phytec-segin.dtsi new file mode 100644 index 0000000000..c1595fc785 --- /dev/null +++ b/arch/arm/dts/imx6ull-phytec-segin.dtsi @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 PHYTEC Messtechnik GmbH + * Author: Stefan Riedmueller + */ + +#include "imx6ul-phytec-segin.dtsi" + +/ { + model = "PHYTEC phyBOARD-Segin i.MX6 ULL"; + compatible = "phytec,imx6ull-pbacd-10", "phytec,imx6ull-pcl063","fsl,imx6ull"; +}; + +&iomuxc { + /delete-node/ flexcan1engrp; + /delete-node/ rtcintgrp; + /delete-node/ stmpegrp; +}; + +&iomuxc_snvs { + princtrl_flexcan1_en: flexcan1engrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059 + >; + }; + + pinctrl_rtc_int: rtcintgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059 + >; + }; + + pinctrl_stmpe: stmpegrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 + >; + }; +}; diff --git a/board/phytec/pcl063/MAINTAINERS b/board/phytec/pcl063/MAINTAINERS index 710b9680d4..02be541cc0 100644 --- a/board/phytec/pcl063/MAINTAINERS +++ b/board/phytec/pcl063/MAINTAINERS @@ -2,10 +2,14 @@ PCL063 BOARD M: Martyn Welch M: Parthiban Nallathambi S: Maintained -F: arch/arm/dts/imx6ul-pcl063.dtsi -F: arch/arm/dts/imx6ul-phycore-segin.dts -F: arch/arm/dts/imx6ull-phycore-segin.dts -F: arch/arm/dts/pcl063-common.dtsi +F: arch/arm/dts/imx6ul-phytec-phycore-som.dtsi +F: arch/arm/dts/imx6ul-phytec-segin-peb-eval-01.dtsi +F: arch/arm/dts/imx6ul-phytec-segin.dtsi +F: arch/arm/dts/imx6ul-phytec-segin-ff-rdk-nand.dts +F: arch/arm/dts/imx6ull-phytec-phycore-som.dtsi +F: arch/arm/dts/imx6ull-phytec-segin-peb-eval-01.dtsi +F: arch/arm/dts/imx6ull-phytec-segin.dtsi +F: arch/arm/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts F: arch/arm/dts/imx6ull-u-boot.dtsi F: board/phytec/pcl063/ F: configs/phycore_pcl063_defconfig diff --git a/configs/phycore_pcl063_defconfig b/configs/phycore_pcl063_defconfig index b9c9a79868..b9e725b6f5 100644 --- a/configs/phycore_pcl063_defconfig +++ b/configs/phycore_pcl063_defconfig @@ -33,7 +33,7 @@ CONFIG_MTDPARTS_DEFAULT="gpmi-nand:4m(uboot),1m(env),-(root)" CONFIG_CMD_UBI=y # CONFIG_ISO_PARTITION is not set CONFIG_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="imx6ul-phycore-segin" +CONFIG_DEFAULT_DEVICE_TREE="imx6ul-phytec-segin-ff-rdk-nand" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_I2C_GPIO=y CONFIG_SYS_I2C_MXC=y diff --git a/configs/phycore_pcl063_ull_defconfig b/configs/phycore_pcl063_ull_defconfig index f2635ce449..879ac78864 100644 --- a/configs/phycore_pcl063_ull_defconfig +++ b/configs/phycore_pcl063_ull_defconfig @@ -29,7 +29,7 @@ CONFIG_CMD_USB_SDP=y CONFIG_CMD_CACHE=y # CONFIG_ISO_PARTITION is not set CONFIG_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="imx6ull-phycore-segin" +CONFIG_DEFAULT_DEVICE_TREE="imx6ull-phytec-segin-ff-rdk-emmc" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_I2C_GPIO=y CONFIG_SYS_I2C_MXC=y