From: Tom Rini Date: Tue, 2 Aug 2022 11:33:32 +0000 (-0400) Subject: arm: Remove cm_t335 board X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=d8d5ab40d5429240219058371aaa203755cd3100;p=u-boot.git arm: Remove cm_t335 board This board is behind on several mandatory DM migrations and is missing OF_CONTROL support that makes other conversions impossible. Remove it. Cc: Igor Grinberg Cc: Nikita Kiryanov Cc: Uri Mashiach Signed-off-by: Tom Rini --- diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index fa41047476..914d43b049 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -207,7 +207,6 @@ source "board/siemens/rut/Kconfig" source "board/ti/ti816x/Kconfig" source "board/ti/am43xx/Kconfig" source "board/ti/am335x/Kconfig" -source "board/compulab/cm_t335/Kconfig" source "board/compulab/cm_t43/Kconfig" source "board/phytec/phycore_am335x_r2/Kconfig" diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig index bd6b086552..987ab367ec 100644 --- a/arch/arm/mach-omap2/am33xx/Kconfig +++ b/arch/arm/mach-omap2/am33xx/Kconfig @@ -125,13 +125,6 @@ config TARGET_CHILIBOARD select DM_SERIAL imply CMD_DM -config TARGET_CM_T335 - bool "Support cm_t335" - select DM - select DM_GPIO - select DM_SERIAL - imply CMD_DM - config TARGET_DRACO bool "Support draco" select BOARD_LATE_INIT diff --git a/board/compulab/cm_t335/Kconfig b/board/compulab/cm_t335/Kconfig deleted file mode 100644 index 683efde764..0000000000 --- a/board/compulab/cm_t335/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_CM_T335 - -config SYS_BOARD - default "cm_t335" - -config SYS_VENDOR - default "compulab" - -config SYS_SOC - default "am33xx" - -config SYS_CONFIG_NAME - default "cm_t335" - -endif diff --git a/board/compulab/cm_t335/MAINTAINERS b/board/compulab/cm_t335/MAINTAINERS deleted file mode 100644 index 5fb922c68b..0000000000 --- a/board/compulab/cm_t335/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -CM_T335 BOARD -M: Igor Grinberg -S: Maintained -F: board/compulab/cm_t335/ -F: include/configs/cm_t335.h -F: configs/cm_t335_defconfig diff --git a/board/compulab/cm_t335/Makefile b/board/compulab/cm_t335/Makefile deleted file mode 100644 index 34f6713118..0000000000 --- a/board/compulab/cm_t335/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2013 Compulab Ltd - http://compulab.co.il/ -# -# Author: Ilya Ledvich - -obj-y += cm_t335.o -obj-$(CONFIG_SPL_BUILD) += mux.o spl.o diff --git a/board/compulab/cm_t335/cm_t335.c b/board/compulab/cm_t335/cm_t335.c deleted file mode 100644 index 1d4a3aceef..0000000000 --- a/board/compulab/cm_t335/cm_t335.c +++ /dev/null @@ -1,166 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Board functions for Compulab CM-T335 board - * - * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/ - * - * Author: Ilya Ledvich - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "../common/eeprom.h" - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Basic board specific setup. Pinmux has been handled already. - */ -int board_init(void) -{ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - gpmc_init(); - -#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE) - status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_OFF); -#endif - return 0; -} - -#if defined (CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD) -static void cpsw_control(int enabled) -{ - /* VTP can be added here */ - return; -} - -static struct cpsw_slave_data cpsw_slave = { - .slave_reg_ofs = 0x208, - .sliver_reg_ofs = 0xd80, - .phy_addr = 0, - .phy_if = PHY_INTERFACE_MODE_RGMII, -}; - -static struct cpsw_platform_data cpsw_data = { - .mdio_base = CPSW_MDIO_BASE, - .cpsw_base = CPSW_BASE, - .mdio_div = 0xff, - .channels = 8, - .cpdma_reg_ofs = 0x800, - .slaves = 1, - .slave_data = &cpsw_slave, - .ale_reg_ofs = 0xd00, - .ale_entries = 1024, - .host_port_reg_ofs = 0x108, - .hw_stats_reg_ofs = 0x900, - .bd_ram_ofs = 0x2000, - .mac_control = (1 << 5), - .control = cpsw_control, - .host_port_num = 0, - .version = CPSW_CTRL_VERSION_2, -}; - -/* PHY reset GPIO */ -#define GPIO_PHY_RST GPIO_PIN(3, 7) - -static void board_phy_init(void) -{ - gpio_request(GPIO_PHY_RST, "phy_rst"); - gpio_direction_output(GPIO_PHY_RST, 0); - mdelay(2); - gpio_set_value(GPIO_PHY_RST, 1); - mdelay(2); -} - -static void get_efuse_mac_addr(uchar *enetaddr) -{ - uint32_t mac_hi, mac_lo; - struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; - - mac_lo = readl(&cdev->macid0l); - mac_hi = readl(&cdev->macid0h); - enetaddr[0] = mac_hi & 0xFF; - enetaddr[1] = (mac_hi & 0xFF00) >> 8; - enetaddr[2] = (mac_hi & 0xFF0000) >> 16; - enetaddr[3] = (mac_hi & 0xFF000000) >> 24; - enetaddr[4] = mac_lo & 0xFF; - enetaddr[5] = (mac_lo & 0xFF00) >> 8; -} - -/* - * Routine: handle_mac_address - * Description: prepare MAC address for on-board Ethernet. - */ -static int handle_mac_address(void) -{ - uchar enetaddr[6]; - int rv; - - rv = eth_env_get_enetaddr("ethaddr", enetaddr); - if (rv) - return 0; - - rv = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS); - if (rv) - get_efuse_mac_addr(enetaddr); - - if (!is_valid_ethaddr(enetaddr)) - return -1; - - return eth_env_set_enetaddr("ethaddr", enetaddr); -} - -#define AR8051_PHY_DEBUG_ADDR_REG 0x1d -#define AR8051_PHY_DEBUG_DATA_REG 0x1e -#define AR8051_DEBUG_RGMII_CLK_DLY_REG 0x5 -#define AR8051_RGMII_TX_CLK_DLY 0x100 - -int board_eth_init(struct bd_info *bis) -{ - int rv, n = 0; - const char *devname; - struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; - - rv = handle_mac_address(); - if (rv) - printf("No MAC address found!\n"); - - writel(RGMII_MODE_ENABLE | RGMII_INT_DELAY, &cdev->miisel); - - board_phy_init(); - - rv = cpsw_register(&cpsw_data); - if (rv < 0) - printf("Error %d registering CPSW switch\n", rv); - else - n += rv; - - /* - * CPSW RGMII Internal Delay Mode is not supported in all PVT - * operating points. So we must set the TX clock delay feature - * in the AR8051 PHY. Since we only support a single ethernet - * device, we only do this for the first instance. - */ - devname = miiphy_get_current_dev(); - - miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_ADDR_REG, - AR8051_DEBUG_RGMII_CLK_DLY_REG); - miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_DATA_REG, - AR8051_RGMII_TX_CLK_DLY); - return n; -} -#endif /* CONFIG_DRIVER_TI_CPSW && !CONFIG_SPL_BUILD */ diff --git a/board/compulab/cm_t335/mux.c b/board/compulab/cm_t335/mux.c deleted file mode 100644 index 1c326bd1b6..0000000000 --- a/board/compulab/cm_t335/mux.c +++ /dev/null @@ -1,116 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Pinmux configuration for Compulab CM-T335 board - * - * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/ - * - * Author: Ilya Ledvich - */ - -#include -#include -#include -#include -#include - -static struct module_pin_mux uart0_pin_mux[] = { - {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, - {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, - {-1}, -}; - -static struct module_pin_mux uart1_pin_mux[] = { - {OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, - {OFFSET(uart1_txd), (MODE(0) | PULLUDEN)}, - {OFFSET(uart1_ctsn), (MODE(0) | PULLUP_EN | RXACTIVE)}, - {OFFSET(uart1_rtsn), (MODE(0) | PULLUDEN)}, - {-1}, -}; - -static struct module_pin_mux mmc0_pin_mux[] = { - {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, - {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, - {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, - {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, - {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, - {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, - {-1}, -}; - -static struct module_pin_mux i2c0_pin_mux[] = { - {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDDIS | SLEWCTRL)}, - {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDDIS | SLEWCTRL)}, - {-1}, -}; - -static struct module_pin_mux i2c1_pin_mux[] = { - /* I2C_DATA */ - {OFFSET(uart0_ctsn), (MODE(3) | RXACTIVE | PULLUDDIS | SLEWCTRL)}, - /* I2C_SCLK */ - {OFFSET(uart0_rtsn), (MODE(3) | RXACTIVE | PULLUDDIS | SLEWCTRL)}, - {-1}, -}; - -static struct module_pin_mux rgmii1_pin_mux[] = { - {OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */ - {OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */ - {OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */ - {OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */ - {OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */ - {OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */ - {OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */ - {OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */ - {OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */ - {OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */ - {OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */ - {OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */ - {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */ - {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ - {-1}, -}; - -static struct module_pin_mux nand_pin_mux[] = { - {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ - {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ - {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ - {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ - {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ - {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ - {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ - {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ - {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ - {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ - {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ - {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ - {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ - {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ - {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ - {-1}, -}; - -static struct module_pin_mux eth_phy_rst_pin_mux[] = { - {OFFSET(emu0), (MODE(7) | PULLUDDIS)}, /* GPIO3_7 */ - {-1}, -}; - -static struct module_pin_mux status_led_pin_mux[] = { - {OFFSET(gpmc_csn3), (MODE(7) | PULLUDEN)}, /* GPIO2_0 */ - {-1}, -}; - -void set_uart_mux_conf(void) -{ - configure_module_pin_mux(uart0_pin_mux); - configure_module_pin_mux(uart1_pin_mux); -} - -void set_mux_conf_regs(void) -{ - configure_module_pin_mux(i2c0_pin_mux); - configure_module_pin_mux(i2c1_pin_mux); - configure_module_pin_mux(rgmii1_pin_mux); - configure_module_pin_mux(eth_phy_rst_pin_mux); - configure_module_pin_mux(mmc0_pin_mux); - configure_module_pin_mux(nand_pin_mux); - configure_module_pin_mux(status_led_pin_mux); -} diff --git a/board/compulab/cm_t335/spl.c b/board/compulab/cm_t335/spl.c deleted file mode 100644 index 33264dfa71..0000000000 --- a/board/compulab/cm_t335/spl.c +++ /dev/null @@ -1,116 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * SPL specific code for Compulab CM-T335 board - * - * Board functions for Compulab CM-T335 board - * - * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/ - * - * Author: Ilya Ledvich - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -const struct ctrl_ioregs ioregs = { - .cm0ioctl = MT41J128MJT125_IOCTRL_VALUE, - .cm1ioctl = MT41J128MJT125_IOCTRL_VALUE, - .cm2ioctl = MT41J128MJT125_IOCTRL_VALUE, - .dt0ioctl = MT41J128MJT125_IOCTRL_VALUE, - .dt1ioctl = MT41J128MJT125_IOCTRL_VALUE, -}; - -static const struct ddr_data ddr3_data = { - .datardsratio0 = MT41J128MJT125_RD_DQS, - .datawdsratio0 = MT41J128MJT125_WR_DQS, - .datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE, - .datawrsratio0 = MT41J128MJT125_PHY_WR_DATA, -}; - -static const struct cmd_control ddr3_cmd_ctrl_data = { - .cmd0csratio = MT41J128MJT125_RATIO, - .cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT, - - .cmd1csratio = MT41J128MJT125_RATIO, - .cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT, - - .cmd2csratio = MT41J128MJT125_RATIO, - .cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT, -}; - -static struct emif_regs ddr3_emif_reg_data = { - .sdram_config = MT41J128MJT125_EMIF_SDCFG, - .ref_ctrl = MT41J128MJT125_EMIF_SDREF, - .sdram_tim1 = MT41J128MJT125_EMIF_TIM1, - .sdram_tim2 = MT41J128MJT125_EMIF_TIM2, - .sdram_tim3 = MT41J128MJT125_EMIF_TIM3, - .zq_config = MT41J128MJT125_ZQ_CFG, - .emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY | - PHY_EN_DYN_PWRDN, -}; - -const struct dpll_params dpll_ddr = { -/* M N M2 M3 M4 M5 M6 */ - 303, (V_OSCK/1000000) - 1, 1, -1, -1, -1, -1}; - -void am33xx_spl_board_init(void) -{ - struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; - - /* Get the frequency */ - dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev); - - /* Set CORE Frequencies to OPP100 */ - do_setup_dpll(&dpll_core_regs, &dpll_core_opp100); - - /* Set MPU Frequency to what we detected now that voltages are set */ - do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100); -} - -const struct dpll_params *get_dpll_ddr_params(void) -{ - return &dpll_ddr; -} - -static void probe_sdram_size(long size) -{ - switch (size) { - case SZ_512M: - ddr3_emif_reg_data.sdram_config = MT41J256MJT125_EMIF_SDCFG; - break; - case SZ_256M: - ddr3_emif_reg_data.sdram_config = MT41J128MJT125_EMIF_SDCFG; - break; - case SZ_128M: - ddr3_emif_reg_data.sdram_config = MT41J64MJT125_EMIF_SDCFG; - break; - default: - puts("Failed configuring DRAM, resetting...\n\n"); - reset_cpu(); - } - debug("%s: setting DRAM size to %ldM\n", __func__, size >> 20); - config_ddr(303, &ioregs, &ddr3_data, - &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); -} - -void sdram_init(void) -{ - long size = SZ_1G; - - do { - size = size / 2; - probe_sdram_size(size); - } while (get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, size) < size); - - return; -} diff --git a/board/compulab/cm_t335/u-boot.lds b/board/compulab/cm_t335/u-boot.lds deleted file mode 100644 index 4993880461..0000000000 --- a/board/compulab/cm_t335/u-boot.lds +++ /dev/null @@ -1,110 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (c) 2004-2008 Texas Instruments - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, - */ - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN(4); - .text : - { - *(.__image_copy_start) - *(.vectors) - CPUDIR/start.o (.text*) - board/compulab/cm_t335/built-in.o (.text*) - *(.text*) - } - - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - - . = ALIGN(4); - .data : { - *(.data*) - } - - . = ALIGN(4); - - . = .; - - . = ALIGN(4); - __u_boot_list : { - KEEP(*(SORT(__u_boot_list*))); - } - - . = ALIGN(4); - - .image_copy_end : - { - *(.__image_copy_end) - } - - .rel_dyn_start : - { - *(.__rel_dyn_start) - } - - .rel.dyn : { - *(.rel*) - } - - .rel_dyn_end : - { - *(.__rel_dyn_end) - } - - .hash : { *(.hash*) } - - .end : - { - *(.__end) - } - - _image_binary_end = .; - - /* - * Deprecated: this MMU section is used by pxa at present but - * should not be used by new boards/CPUs. - */ - . = ALIGN(4096); - .mmutable : { - *(.mmutable) - } - -/* - * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c - * __bss_base and __bss_limit are for linker only (overlay ordering) - */ - - .bss_start __rel_dyn_start (OVERLAY) : { - KEEP(*(.__bss_start)); - __bss_base = .; - } - - .bss __bss_base (OVERLAY) : { - *(.bss*) - . = ALIGN(4); - __bss_limit = .; - } - - .bss_end __bss_limit (OVERLAY) : { - KEEP(*(.__bss_end)); - } - - .dynsym _image_binary_end : { *(.dynsym) } - .dynbss : { *(.dynbss) } - .dynstr : { *(.dynstr*) } - .dynamic : { *(.dynamic*) } - .plt : { *(.plt*) } - .interp : { *(.interp*) } - .gnu : { *(.gnu*) } - .ARM.exidx : { *(.ARM.exidx*) } -} diff --git a/configs/cm_t335_defconfig b/configs/cm_t335_defconfig deleted file mode 100644 index f1b4b622cb..0000000000 --- a/configs/cm_t335_defconfig +++ /dev/null @@ -1,83 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_SPL_GPIO=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_ENV_SIZE=0x4000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_AM33XX=y -CONFIG_TARGET_CM_T335=y -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL=y -CONFIG_SPL_FS_FAT=y -CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 -CONFIG_TIMESTAMP=y -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 -CONFIG_SPL_FS_EXT4=y -CONFIG_SPL_I2C=y -CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_NAND_DRIVERS=y -CONFIG_SPL_NAND_ECC=y -CONFIG_SPL_NAND_BASE=y -CONFIG_SPL_POWER=y -CONFIG_SPL_WATCHDOG=y -# CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set -CONFIG_SYS_PROMPT="CM-T335 # " -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=1051 -CONFIG_CMD_ASKENV=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_EEPROM_LAYOUT=y -CONFIG_EEPROM_LAYOUT_HELP_STRING="v2, v3" -CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4 -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_BOOTP_DNS2=y -CONFIG_SYS_DISABLE_AUTOLOAD=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=nand" -CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:2m(spl),1m(u-boot),1m(u-boot-env),1m(dtb),4m(splash),6m(kernel),-(rootfs)" -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_VERSION_VARIABLE=y -CONFIG_NET_RETRY_COUNT=10 -CONFIG_BOOTP_SEND_HOSTNAME=y -CONFIG_CMD_PCA953X=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_LED_STATUS=y -CONFIG_LED_STATUS_GPIO=y -CONFIG_LED_STATUS0=y -CONFIG_LED_STATUS_BIT=64 -CONFIG_LED_STATUS_BOOT_ENABLE=y -CONFIG_LED_STATUS_BOOT=0 -CONFIG_SYS_I2C_EEPROM_ADDR=0x50 -CONFIG_MMC_OMAP_HS=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 -CONFIG_SYS_NAND_PAGE_SIZE=0x800 -CONFIG_SYS_NAND_OOBSIZE=0x40 -CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y -CONFIG_SYS_NAND_U_BOOT_OFFS=0x200000 -CONFIG_PHY_ATHEROS=y -CONFIG_MII=y -CONFIG_DRIVER_TI_CPSW=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h deleted file mode 100644 index 84b4271c36..0000000000 --- a/include/configs/cm_t335.h +++ /dev/null @@ -1,98 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Config file for Compulab CM-T335 board - * - * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/ - * - * Author: Ilya Ledvich - */ - -#ifndef __CONFIG_CM_T335_H -#define __CONFIG_CM_T335_H - -#include - -#undef CONFIG_MAX_RAM_BANK_SIZE -#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* 512MB */ - -/* Clock Defines */ -#define V_OSCK 25000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK) - -#define MMCARGS \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \ - "mmcrootfstype=ext4\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" - -#define NANDARGS \ - "nandroot=ubi0:rootfs rw\0" \ - "nandrootfstype=ubifs\0" \ - "nandargs=setenv bootargs console=${console} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype} " \ - "ubi.mtd=${rootfs_name}\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "nboot ${loadaddr} nand0 900000; " \ - "bootm ${loadaddr}\0" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=82000000\0" \ - "console=ttyO0,115200n8\0" \ - "rootfs_name=rootfs\0" \ - "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source ${loadaddr}\0" \ - "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ - MMCARGS \ - NANDARGS - -/* Serial console configuration */ - -/* NS16550 Configuration */ -#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ -#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ - -/* I2C Configuration */ - -/* SPL */ - -/* Network. */ - -/* NAND support */ -#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ - 10, 11, 12, 13, 14, 15, 16, 17, \ - 18, 19, 20, 21, 22, 23, 24, 25, \ - 26, 27, 28, 29, 30, 31, 32, 33, \ - 34, 35, 36, 37, 38, 39, 40, 41, \ - 42, 43, 44, 45, 46, 47, 48, 49, \ - 50, 51, 52, 53, 54, 55, 56, 57, } - -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 14 - -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE - -/* GPIO pin + bank to pin ID mapping */ -#define GPIO_PIN(_bank, _pin) ((_bank << 5) + _pin) - -/* Status LED */ -/* Status LED polarity is inversed, so init it in the "off" state */ - -/* EEPROM */ - -/* - * Enable PCA9555 at I2C0-0x26. - * First select the I2C0 bus with "i2c dev 0", then use "pca953x" command. - */ -#define CONFIG_PCA953X -#define CONFIG_SYS_I2C_PCA953X_ADDR 0x26 -#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x26, 16} } - -#endif /* __CONFIG_CM_T335_H */