From: Markus Niebel <Markus.Niebel@tq-group.com>
Date: Fri, 3 Feb 2017 15:25:01 +0000 (+0100)
Subject: imx6: tqma6: adjust ethernet phy reset delay
X-Git-Tag: v2025.01-rc5-pxa1908~7379^2~32
X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=d5fa17e6fa15fccbe4d3345690297f5cecbd7002;p=u-boot.git

imx6: tqma6: adjust ethernet phy reset delay

fix the reset delay which was to short

Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
---

diff --git a/board/tqc/tqma6/tqma6_mba6.c b/board/tqc/tqma6/tqma6_mba6.c
index 02705bef69..6d63953014 100644
--- a/board/tqc/tqma6/tqma6_mba6.c
+++ b/board/tqc/tqma6/tqma6_mba6.c
@@ -125,7 +125,7 @@ static void mba6_setup_iomuxc_enet(void)
 	/* Reset PHY */
 	gpio_direction_output(ENET_PHY_RESET_GPIO , 0);
 	/* Need delay 10ms after power on according to KSZ9031 spec */
-	udelay(1000 * 10);
+	mdelay(10);
 	gpio_set_value(ENET_PHY_RESET_GPIO, 1);
 	/*
 	 * KSZ9031 manual: 100 usec wait time after reset before communication
@@ -133,7 +133,7 @@ static void mba6_setup_iomuxc_enet(void)
 	 * BUGBUG: hardware has an RC const that needs > 10 msec from 0->1 on
 	 * reset before the phy sees a high level
 	 */
-	udelay(200);
+	mdelay(15);
 }
 
 static iomux_v3_cfg_t const mba6_uart2_pads[] = {