From: Heiko Stuebner Date: Mon, 28 Oct 2024 19:00:34 +0000 (+0100) Subject: board: rockchip: add support for Qnap TS433 devices X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=d3cacb79e7062772e54cb4a2f5a23f873a630b0e;p=u-boot.git board: rockchip: add support for Qnap TS433 devices The Qnap TS433 is a 4-bay NAS based around the RK3568. Two SATA bays are connected to the RK3568's own SATA controllers while the other two are connected to a JMicron SATA controller living on the PCIe bus. It provides one 2.5Gb and one 1Gb ethernet port as well as 3 usb ports. Signed-off-by: Heiko Stuebner Reviewed-by: Kever Yang --- diff --git a/arch/arm/dts/rk3568-qnap-ts433-u-boot.dtsi b/arch/arm/dts/rk3568-qnap-ts433-u-boot.dtsi new file mode 100644 index 0000000000..19acbceb46 --- /dev/null +++ b/arch/arm/dts/rk3568-qnap-ts433-u-boot.dtsi @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2024 Heiko Stuebner + */ + +#include "rk356x-u-boot.dtsi" diff --git a/arch/arm/mach-rockchip/rk3568/Kconfig b/arch/arm/mach-rockchip/rk3568/Kconfig index e646f714c9..ce327ed6f9 100644 --- a/arch/arm/mach-rockchip/rk3568/Kconfig +++ b/arch/arm/mach-rockchip/rk3568/Kconfig @@ -32,6 +32,19 @@ config TARGET_POWKIDDY_X55_RK3566 help Powkiddy X55 handheld gaming console with an RK3566 SoC. +config TARGET_QNAP_TS433_RK3568 + bool "QNAP-TS433" + help + Qnap TS433 4-bay NAS with a RK3568 SoC. + + It provides the following featureset: + * 4GB LPDDR4 + * 4GB eMMC + * 2 SATA ports connected to two RK3568's SATA controllers + * 2 SATA ports connected to a JMicron JMB58x AHCI SATA controller + * 1 1G network controller + * 1 2.5G Realtek RTL8125 network controller + config TARGET_QUARTZ64_RK3566 bool "Pine64 Quartz64" help @@ -70,6 +83,7 @@ source "board/hardkernel/odroid_m1/Kconfig" source "board/hardkernel/odroid_m1s/Kconfig" source "board/pine64/quartz64_rk3566/Kconfig" source "board/powkiddy/x55/Kconfig" +source "board/qnap/ts433/Kconfig" source "board/radxa/zero3-rk3566/Kconfig" source "board/xunlong/orangepi-3b-rk3566/Kconfig" diff --git a/board/qnap/ts433/Kconfig b/board/qnap/ts433/Kconfig new file mode 100644 index 0000000000..b00e1f9f2e --- /dev/null +++ b/board/qnap/ts433/Kconfig @@ -0,0 +1,12 @@ +if TARGET_QNAP_TS433_RK3568 + +config SYS_BOARD + default "qnap_ts433" + +config SYS_VENDOR + default "qnap" + +config SYS_CONFIG_NAME + default "qnap_ts433" + +endif diff --git a/board/qnap/ts433/MAINTAINERS b/board/qnap/ts433/MAINTAINERS new file mode 100644 index 0000000000..c2b31ad979 --- /dev/null +++ b/board/qnap/ts433/MAINTAINERS @@ -0,0 +1,8 @@ +QNAP-TS433 +M: Heiko Stuebner +S: Maintained +F: board/qnap/ts433/ +F: doc/board/qnap/ +F: include/configs/qnap_ts433.h +F: configs/qnap-ts433-rk3568_defconfig +F: arch/arm/dts/rk3568-qnap-ts433-u-boot.dtsi diff --git a/configs/qnap-ts433-rk3568_defconfig b/configs/qnap-ts433-rk3568_defconfig new file mode 100644 index 0000000000..840da7f375 --- /dev/null +++ b/configs/qnap-ts433-rk3568_defconfig @@ -0,0 +1,87 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_HAS_NONCACHED_MEMORY=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3568-qnap-ts433" +CONFIG_ROCKCHIP_RK3568=y +CONFIG_SPL_SERIAL=y +CONFIG_TARGET_QNAP_TS433_RK3568=y +CONFIG_DEBUG_UART_BASE=0xFE660000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_PCI=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_LEGACY_IMAGE_FORMAT=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-qnap-ts433.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_ATF=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SATA=y +CONFIG_CMD_USB=y +CONFIG_CMD_ROCKUSB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_REGMAP=y +CONFIG_SPL_SYSCON=y +CONFIG_AHCI_PCI=y +CONFIG_DWC_AHCI=y +CONFIG_SPL_CLK=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_DWC_ETH_QOS=y +CONFIG_DWC_ETH_QOS_ROCKCHIP=y +CONFIG_RTL8169=y +CONFIG_PCIE_DW_ROCKCHIP=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y +CONFIG_SPL_PINCTRL=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_FAN53555=y +CONFIG_PMIC_RK8XX=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_SPL_RAM=y +CONFIG_SCSI=y +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550_MEM32=y +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_ERRNO_STR=y diff --git a/doc/board/index.rst b/doc/board/index.rst index ca5246e259..0343d9a825 100644 --- a/doc/board/index.rst +++ b/doc/board/index.rst @@ -43,6 +43,7 @@ Board-specific doc phytec/index purism/index qualcomm/index + qnap/index renesas/index rockchip/index samsung/index diff --git a/doc/board/qnap/index.rst b/doc/board/qnap/index.rst new file mode 100644 index 0000000000..652ea11a05 --- /dev/null +++ b/doc/board/qnap/index.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Qnap +==== + +.. toctree:: + :maxdepth: 2 + + ts433.rst diff --git a/doc/board/qnap/ts433.rst b/doc/board/qnap/ts433.rst new file mode 100644 index 0000000000..1e1bfbb919 --- /dev/null +++ b/doc/board/qnap/ts433.rst @@ -0,0 +1,91 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Qnap TS433 Devices +================================= + +This allows U-Boot to boot the Qnap TS433 NAS + +Preparing the serial +-------------------- + +Qnap devices run their serial console with a 115200 baudrate. As the +binary DDR-init and maskrom-downloader expect a 1500000 rate, it is +necessary to adapt the binaries if their output is needed. + +This can be done with a binary provided in the rkbin repository. +First the ddrbin_param.txt in the rkbin repo needs to be modified: + +.. code-block:: bash + + diff --git a/tools/ddrbin_param.txt b/tools/ddrbin_param.txt + index 0dfdd318..82ade7e7 100644 + --- a/tools/ddrbin_param.txt + +++ b/tools/ddrbin_param.txt + @@ -11,7 +11,7 @@ lp5_freq= + + uart id= + uart iomux= + -uart baudrate= + +uart baudrate=115200 + + sr_idle= + pd_idle= + +And after that the ddrbin_tool binary can be used to modify apply this +modification and also a new maskrom downloader can be build: + +.. code-block:: bash + + $ tools/ddrbin_tool rk3568 tools/ddrbin_param.txt bin/rk35/rk3568_ddr_1560MHz_v1.21.bin + $ tools/boot_merger RKBOOT/RK3568MINIALL.ini + +Building U-Boot +--------------- + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-linux-gnu- + $ export BL31=../rkbin/bin/rk35/rk3568_bl31_v1.34.elf + $ export ROCKCHIP_TPL=../rkbin/bin/rk35/rk3568_ddr_1056MHz_v1.13.bin + $ make qnap-ts433-rk3568_defconfig + $ make + +This will build ``u-boot-rockchip.bin`` which can be written to the +on-board eMMC. + +Image installation +------------------ + +The Qnap thankfully provides an easily accessible serial header as well as +a very user-friendly jumper-header to bring the device into maskrom mode. + +To access both, the drive trays need to be removed. Looking at the board, +through the upper cutout of the metal frame the white 4-port serial-header +can be seen next to a barcode sticker. It's pinout is as follows: + +.. code-block:: none + + ,_ _. + |1234| 1=TX 2=VCC + `----' 3=RX 4=GND + + +Directly below it, the mentioned 2-pin jumper header can be seen. + +To write your u-boot to the device, it needs to be powered off first. Then +a jumper or suitable cable needs to be used to connect the two pins of the +maskrom header. Turning on the device now will start it in maskrom mode. + +It is important that the jumper gets removed after that stop and before +actually trying to write to the emmc. + +The front usb-port needs to be connected to the host with an USB-A-to-A +cable to allow flashing. + +The flashing itself is done via rkdeveloptool, which can be found for +example as package of that name in Debian-based distributions: + +.. code-block:: bash + + $ rkdeveloptool db rk356x_spl_loader_v1.21.113.bin + $ rkdeveloptool wl 64 u-boot-rockchip.bin diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst index 7b11a2e0a3..0783603ec5 100644 --- a/doc/board/rockchip/rockchip.rst +++ b/doc/board/rockchip/rockchip.rst @@ -119,6 +119,7 @@ List of mainline supported Rockchip boards: - FriendlyElec NanoPi R5S (nanopi-r5s-rk3568) - Generic RK3566/RK3568 (generic-rk3568) - Hardkernel ODROID-M1 (odroid-m1-rk3568) + - QNAP TS-433 (qnap-ts433-rk3568) - Radxa E25 Carrier Board (radxa-e25-rk3568) - Radxa ROCK 3A (rock-3a-rk3568) - Radxa ROCK 3B (rock-3b-rk3568) diff --git a/include/configs/qnap_ts433.h b/include/configs/qnap_ts433.h new file mode 100644 index 0000000000..aee4546bf0 --- /dev/null +++ b/include/configs/qnap_ts433.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef __QNAP_TS433_H +#define __QNAP_TS433_H + +#define ROCKCHIP_DEVICE_SETTINGS + +#include + +#endif