From: Chin-Ting Kuo Date: Fri, 19 Aug 2022 09:01:07 +0000 (+0800) Subject: arm: dts: aspeed: Update SPI flash node settings X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=d37b4f37ea40243ad3a126a152920339189afb52;p=u-boot.git arm: dts: aspeed: Update SPI flash node settings For both AST2500 and AST2600, there are three SPI controllers, FMC(Firmware Memory Controller), SPI1 and SPI2. The clock source is HCLK. Following is the basic information for ASPEED SPI controller. AST2500: - FMC: CS number: 3 controller reg: 0x1e620000 - 0x1e62ffff decoded address: 0x20000000 - 0x2fffffff - SPI1: CS number: 2 controller reg: 0x1e630000 - 0x1e630fff decoded address: 0x30000000 - 0x37ffffff - SPI2: CS number: 2 controller reg: 0x1e631000 - 0x1e631fff decoded address: 0x38000000 - 0x3fffffff AST2600: - FMC: CS number: 3 controller reg: 0x1e620000 - 0x1e62ffff decoded address: 0x20000000 - 0x2fffffff - SPI1: CS number: 2 controller reg: 0x1e630000 - 0x1e630fff decoded address: 0x30000000 - 0x3fffffff - SPI2: CS number: 3 controller reg: 0x1e631000 - 0x1e631fff decoded address: 0x50000000 - 0x5fffffff Signed-off-by: Chin-Ting Kuo --- diff --git a/arch/arm/dts/ast2500-evb.dts b/arch/arm/dts/ast2500-evb.dts index cc577761fa..1fbacf985f 100644 --- a/arch/arm/dts/ast2500-evb.dts +++ b/arch/arm/dts/ast2500-evb.dts @@ -78,6 +78,39 @@ pinctrl-0 = <&pinctrl_sd2_default>; }; +&fmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fwspics1_default>; + + flash@0 { + status = "okay"; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; + + flash@1 { + status = "okay"; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1cs1_default>; + + flash@0 { + status = "okay"; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + &i2c3 { status = "okay"; diff --git a/arch/arm/dts/ast2500.dtsi b/arch/arm/dts/ast2500.dtsi index cea08e6f08..320d2e5340 100644 --- a/arch/arm/dts/ast2500.dtsi +++ b/arch/arm/dts/ast2500.dtsi @@ -57,23 +57,26 @@ ranges; fmc: flash-controller@1e620000 { - reg = < 0x1e620000 0xc4 - 0x20000000 0x10000000 >; + reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2500-fmc"; + clocks = <&scu ASPEED_CLK_AHB>; + num-cs = <3>; status = "disabled"; - interrupts = <19>; + flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; status = "disabled"; }; + flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; status = "disabled"; }; + flash@2 { reg = < 2 >; compatible = "jedec,spi-nor"; @@ -82,17 +85,20 @@ }; spi1: flash-controller@1e630000 { - reg = < 0x1e630000 0xc4 - 0x30000000 0x08000000 >; + reg = <0x1e630000 0xc4>, <0x30000000 0x08000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2500-spi"; + clocks = <&scu ASPEED_CLK_AHB>; + num-cs = <2>; status = "disabled"; + flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; status = "disabled"; }; + flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; @@ -101,17 +107,20 @@ }; spi2: flash-controller@1e631000 { - reg = < 0x1e631000 0xc4 - 0x38000000 0x08000000 >; + reg = <0x1e631000 0xc4>, <0x38000000 0x08000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2500-spi"; + clocks = <&scu ASPEED_CLK_AHB>; + num-cs = <2>; status = "disabled"; + flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; status = "disabled"; }; + flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; diff --git a/arch/arm/dts/ast2600-evb.dts b/arch/arm/dts/ast2600-evb.dts index a9bba96816..a097f320e4 100644 --- a/arch/arm/dts/ast2600-evb.dts +++ b/arch/arm/dts/ast2600-evb.dts @@ -72,12 +72,10 @@ &fmc { status = "okay"; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fmcquad_default>; flash@0 { - compatible = "spi-flash", "sst,w25q256"; status = "okay"; spi-max-frequency = <50000000>; spi-tx-bus-width = <4>; @@ -85,7 +83,6 @@ }; flash@1 { - compatible = "spi-flash", "sst,w25q256"; status = "okay"; spi-max-frequency = <50000000>; spi-tx-bus-width = <4>; @@ -93,7 +90,6 @@ }; flash@2 { - compatible = "spi-flash", "sst,w25q256"; status = "okay"; spi-max-frequency = <50000000>; spi-tx-bus-width = <4>; @@ -103,14 +99,12 @@ &spi1 { status = "okay"; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1_default &pinctrl_spi1abr_default &pinctrl_spi1cs1_default &pinctrl_spi1wp_default &pinctrl_spi1wp_default &pinctrl_spi1quad_default>; flash@0 { - compatible = "spi-flash", "sst,w25q256"; status = "okay"; spi-max-frequency = <50000000>; spi-tx-bus-width = <4>; @@ -120,13 +114,11 @@ &spi2 { status = "okay"; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default &pinctrl_spi2cs2_default &pinctrl_spi2quad_default>; flash@0 { - compatible = "spi-flash", "sst,w25q256"; status = "okay"; spi-max-frequency = <50000000>; spi-tx-bus-width = <4>; diff --git a/arch/arm/dts/ast2600.dtsi b/arch/arm/dts/ast2600.dtsi index ac8cd4d67d..8d91eedc17 100644 --- a/arch/arm/dts/ast2600.dtsi +++ b/arch/arm/dts/ast2600.dtsi @@ -129,74 +129,78 @@ }; fmc: flash-controller@1e620000 { - reg = < 0x1e620000 0xc4 - 0x20000000 0x10000000 >; + reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2600-fmc"; status = "disabled"; - interrupts = ; clocks = <&scu ASPEED_CLK_AHB>; num-cs = <3>; + flash@0 { - reg = < 0 >; + reg = <0>; compatible = "jedec,spi-nor"; status = "disabled"; }; + flash@1 { - reg = < 1 >; + reg = <1>; compatible = "jedec,spi-nor"; status = "disabled"; }; + flash@2 { - reg = < 2 >; + reg = <2>; compatible = "jedec,spi-nor"; status = "disabled"; }; }; spi1: flash-controller@1e630000 { - reg = < 0x1e630000 0xc4 - 0x30000000 0x08000000 >; + reg = <0x1e630000 0xc4>, <0x30000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2600-spi"; clocks = <&scu ASPEED_CLK_AHB>; num-cs = <2>; status = "disabled"; + flash@0 { - reg = < 0 >; + reg = <0>; compatible = "jedec,spi-nor"; status = "disabled"; }; + flash@1 { - reg = < 1 >; + reg = <1>; compatible = "jedec,spi-nor"; status = "disabled"; }; }; spi2: flash-controller@1e631000 { - reg = < 0x1e631000 0xc4 - 0x50000000 0x08000000 >; + reg = <0x1e631000 0xc4>, <0x50000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2600-spi"; clocks = <&scu ASPEED_CLK_AHB>; num-cs = <3>; status = "disabled"; + flash@0 { - reg = < 0 >; + reg = <0>; compatible = "jedec,spi-nor"; status = "disabled"; }; + flash@1 { - reg = < 1 >; + reg = <1>; compatible = "jedec,spi-nor"; status = "disabled"; }; + flash@2 { - reg = < 2 >; + reg = <2>; compatible = "jedec,spi-nor"; status = "disabled"; };