From: Kuldeep Singh Date: Sat, 14 Mar 2020 12:53:56 +0000 (+0530) Subject: arm: dts: lx2160a: Use flexspi in octal I/O mode X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=bd294e43dc8233a875088bbf4dc89ceb43f5b777;p=u-boot.git arm: dts: lx2160a: Use flexspi in octal I/O mode Configure RX and TX bus-width values to use flexspi in octal I/O mode. If bus-widths are not specified, then single I/O mode is set by default. Signed-off-by: Kuldeep Singh Reviewed-by: Priyanka Jain --- diff --git a/arch/arm/dts/fsl-lx2160a-qds.dts b/arch/arm/dts/fsl-lx2160a-qds.dts index 33bedae655..592fd5977e 100644 --- a/arch/arm/dts/fsl-lx2160a-qds.dts +++ b/arch/arm/dts/fsl-lx2160a-qds.dts @@ -58,6 +58,8 @@ compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; }; }; diff --git a/arch/arm/dts/fsl-lx2160a-rdb.dts b/arch/arm/dts/fsl-lx2160a-rdb.dts index e542c6992a..87617ca51f 100644 --- a/arch/arm/dts/fsl-lx2160a-rdb.dts +++ b/arch/arm/dts/fsl-lx2160a-rdb.dts @@ -39,6 +39,8 @@ compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; }; mt35xu512aba1: flash@1 { @@ -47,6 +49,8 @@ compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <1>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; }; };