From: shengfei Xu <xsf@rock-chips.com>
Date: Mon, 21 Aug 2023 22:30:26 +0000 (+0000)
Subject: regulator: rk8xx: Return correct voltage for switchout converters
X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=bb657ffdd688dc08073734a402914ec0a8492d53;p=u-boot.git

regulator: rk8xx: Return correct voltage for switchout converters

The voltage value for switchout converters is always reported as 0 uV.
When the switch is enabled, it's voltage is same as input supply.

Fix this by implementing get_value for switchout converters.

Fixes: ee30068fa574 ("power: pmic: rk809: support rk809 pmic")
Signed-off-by: shengfei Xu <xsf@rock-chips.com>
[jonas@kwiboo.se: fix checkpatch error, update commit message]
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---

diff --git a/drivers/power/regulator/rk8xx.c b/drivers/power/regulator/rk8xx.c
index 9444daa85c..e80bd6c372 100644
--- a/drivers/power/regulator/rk8xx.c
+++ b/drivers/power/regulator/rk8xx.c
@@ -1032,6 +1032,25 @@ static int switch_get_suspend_enable(struct udevice *dev)
  */
 static int switch_get_value(struct udevice *dev)
 {
+	static const char * const supply_name_rk809[] = {
+		"vcc9-supply",
+		"vcc8-supply",
+	};
+	struct rk8xx_priv *priv = dev_get_priv(dev->parent);
+	struct udevice *supply;
+	int id = dev->driver_data - 1;
+
+	if (!switch_get_enable(dev))
+		return 0;
+
+	if (priv->variant == RK809_ID) {
+		if (!uclass_get_device_by_phandle(UCLASS_REGULATOR,
+						  dev->parent,
+						  supply_name_rk809[id],
+						  &supply))
+			return regulator_get_value(supply);
+	}
+
 	return 0;
 }