From: Jonas Schwöbel Date: Mon, 22 Jan 2024 12:40:27 +0000 (+0200) Subject: Tegra30: Add funcmux for UART over SD slot X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=b515d7ae0de51a26f73b2ddb5ea4db0d95b67d7a;p=u-boot.git Tegra30: Add funcmux for UART over SD slot Tegra 3 has UART-E exposable via SD card slot which may be handy for debugging. This change only adds funcmux part, to use UART-E on the device you additionally would need: - set stdout-path to serial@70006400 (uarte) - configure sdmmc1_dat3_py4 and sdmmc1_dat2_py5 pinmux for uarte - disable or remove sdhci@7800000 node - enable CONFIG_TEGRA_ENABLE_UARTE in defconfig - set CFG_SYS_NS16550_COM to NV_PA_APB_UARTE_BASE in device header Signed-off-by: Jonas Schwöbel Signed-off-by: Svyatoslav Ryhel --- diff --git a/arch/arm/include/asm/arch-tegra30/funcmux.h b/arch/arm/include/asm/arch-tegra30/funcmux.h index 2e8b335916..05414061a2 100644 --- a/arch/arm/include/asm/arch-tegra30/funcmux.h +++ b/arch/arm/include/asm/arch-tegra30/funcmux.h @@ -16,5 +16,6 @@ enum { /* UART configs */ FUNCMUX_UART1_ULPI = 0, + FUNCMUX_UART5_SDMMC1 = 1, }; #endif /* _TEGRA30_FUNCMUX_H_ */ diff --git a/arch/arm/mach-tegra/board.c b/arch/arm/mach-tegra/board.c index c382e04286..be739c7587 100644 --- a/arch/arm/mach-tegra/board.c +++ b/arch/arm/mach-tegra/board.c @@ -181,7 +181,7 @@ static int uart_configs[] = { -1, -1, -1, - -1, + FUNCMUX_UART5_SDMMC1, /* UARTE */ #elif defined(CONFIG_TEGRA114) -1, -1, diff --git a/drivers/pinctrl/tegra/funcmux-tegra30.c b/drivers/pinctrl/tegra/funcmux-tegra30.c index e31b859beb..5d3403ae44 100644 --- a/drivers/pinctrl/tegra/funcmux-tegra30.c +++ b/drivers/pinctrl/tegra/funcmux-tegra30.c @@ -33,6 +33,22 @@ int funcmux_select(enum periph_id id, int config) break; } break; + case PERIPH_ID_UART5: + switch (config) { + case FUNCMUX_UART5_SDMMC1: + pinmux_set_func(PMUX_PINGRP_SDMMC1_DAT3_PY4, + PMUX_FUNC_UARTE); + pinmux_set_func(PMUX_PINGRP_SDMMC1_DAT2_PY5, + PMUX_FUNC_UARTE); + + pinmux_set_io(PMUX_PINGRP_SDMMC1_DAT3_PY4, PMUX_PIN_OUTPUT); + pinmux_set_io(PMUX_PINGRP_SDMMC1_DAT2_PY5, PMUX_PIN_INPUT); + + pinmux_tristate_disable(PMUX_PINGRP_SDMMC1_DAT3_PY4); + pinmux_tristate_disable(PMUX_PINGRP_SDMMC1_DAT2_PY5); + break; + } + break; /* Add other periph IDs here as needed */