From: Marek Vasut Date: Fri, 8 Aug 2014 14:41:38 +0000 (-0700) Subject: e1000: Implement dcache support X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=873e8e0198a204e63b4e44094e36e81df94513f3;p=u-boot.git e1000: Implement dcache support Implement proper support for cache flushing and invalidation into the Intel e1000 NIC driver. Signed-off-by: Marek Vasut Acked-by: Tim Harvey --- diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 9d9b259d64..0441a4f888 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -41,12 +41,12 @@ tested on both gig copper and gig fiber boards /* NIC specific static variables go here */ -static char tx_pool[128 + 16]; -static char rx_pool[128 + 16]; -static char packet[2096]; +/* Intel i210 needs the DMA descriptor rings aligned to 128b */ +#define E1000_BUFFER_ALIGN 128 -static struct e1000_tx_desc *tx_base; -static struct e1000_rx_desc *rx_base; +DEFINE_ALIGN_BUFFER(struct e1000_tx_desc, tx_base, 16, E1000_BUFFER_ALIGN); +DEFINE_ALIGN_BUFFER(struct e1000_rx_desc, rx_base, 16, E1000_BUFFER_ALIGN); +DEFINE_ALIGN_BUFFER(unsigned char, packet, 4096, E1000_BUFFER_ALIGN); static int tx_tail; static int rx_tail, rx_last; @@ -4803,12 +4803,25 @@ void fill_rx(struct e1000_hw *hw) { struct e1000_rx_desc *rd; + uint32_t flush_start, flush_end; rx_last = rx_tail; rd = rx_base + rx_tail; rx_tail = (rx_tail + 1) % 8; memset(rd, 0, 16); - rd->buffer_addr = cpu_to_le64((u32) & packet); + rd->buffer_addr = cpu_to_le64((u32)packet); + + /* + * Make sure there are no stale data in WB over this area, which + * might get written into the memory while the e1000 also writes + * into the same memory area. + */ + invalidate_dcache_range((u32)packet, (u32)packet + 4096); + /* Dump the DMA descriptor into RAM. */ + flush_start = ((u32)rd) & ~(ARCH_DMA_MINALIGN - 1); + flush_end = flush_start + roundup(sizeof(*rd), ARCH_DMA_MINALIGN); + flush_dcache_range(flush_start, flush_end); + E1000_WRITE_REG(hw, RDT, rx_tail); } @@ -4822,17 +4835,10 @@ fill_rx(struct e1000_hw *hw) static void e1000_configure_tx(struct e1000_hw *hw) { - unsigned long ptr; unsigned long tctl; unsigned long tipg, tarc; uint32_t ipgr1, ipgr2; - ptr = (u32) tx_pool; - if (ptr & 0xf) - ptr = (ptr + 0x10) & (~0xf); - - tx_base = (typeof(tx_base)) ptr; - E1000_WRITE_REG(hw, TDBAL, (u32) tx_base); E1000_WRITE_REG(hw, TDBAH, 0); @@ -4941,7 +4947,6 @@ e1000_setup_rctl(struct e1000_hw *hw) static void e1000_configure_rx(struct e1000_hw *hw) { - unsigned long ptr; unsigned long rctl, ctrl_ext; rx_tail = 0; /* make sure receives are disabled while setting up the descriptors */ @@ -4963,10 +4968,6 @@ e1000_configure_rx(struct e1000_hw *hw) E1000_WRITE_FLUSH(hw); } /* Setup the Base and Length of the Rx Descriptor Ring */ - ptr = (u32) rx_pool; - if (ptr & 0xf) - ptr = (ptr + 0x10) & (~0xf); - rx_base = (typeof(rx_base)) ptr; E1000_WRITE_REG(hw, RDBAL, (u32) rx_base); E1000_WRITE_REG(hw, RDBAH, 0); @@ -4989,12 +4990,25 @@ e1000_poll(struct eth_device *nic) { struct e1000_hw *hw = nic->priv; struct e1000_rx_desc *rd; + uint32_t inval_start, inval_end; + uint32_t len; + /* return true if there's an ethernet packet ready to read */ rd = rx_base + rx_last; + + /* Re-load the descriptor from RAM. */ + inval_start = ((u32)rd) & ~(ARCH_DMA_MINALIGN - 1); + inval_end = inval_start + roundup(sizeof(*rd), ARCH_DMA_MINALIGN); + invalidate_dcache_range(inval_start, inval_end); + if (!(le32_to_cpu(rd->status)) & E1000_RXD_STAT_DD) return 0; /*DEBUGOUT("recv: packet len=%d \n", rd->length); */ - NetReceive((uchar *)packet, le32_to_cpu(rd->length)); + /* Packet received, make sure the data are re-loaded from RAM. */ + len = le32_to_cpu(rd->length); + invalidate_dcache_range((u32)packet, + (u32)packet + roundup(len, ARCH_DMA_MINALIGN)); + NetReceive((uchar *)packet, len); fill_rx(hw); return 1; } @@ -5002,12 +5016,13 @@ e1000_poll(struct eth_device *nic) /************************************************************************** TRANSMIT - Transmit a frame ***************************************************************************/ -static int e1000_transmit(struct eth_device *nic, void *packet, int length) +static int e1000_transmit(struct eth_device *nic, void *txpacket, int length) { - void *nv_packet = (void *)packet; + void *nv_packet = (void *)txpacket; struct e1000_hw *hw = nic->priv; struct e1000_tx_desc *txp; int i = 0; + uint32_t flush_start, flush_end; txp = tx_base + tx_tail; tx_tail = (tx_tail + 1) % 8; @@ -5015,10 +5030,22 @@ static int e1000_transmit(struct eth_device *nic, void *packet, int length) txp->buffer_addr = cpu_to_le64(virt_to_bus(hw->pdev, nv_packet)); txp->lower.data = cpu_to_le32(hw->txd_cmd | length); txp->upper.data = 0; + + /* Dump the packet into RAM so e1000 can pick them. */ + flush_dcache_range((u32)nv_packet, + (u32)nv_packet + roundup(length, ARCH_DMA_MINALIGN)); + /* Dump the descriptor into RAM as well. */ + flush_start = ((u32)txp) & ~(ARCH_DMA_MINALIGN - 1); + flush_end = flush_start + roundup(sizeof(*txp), ARCH_DMA_MINALIGN); + flush_dcache_range(flush_start, flush_end); + E1000_WRITE_REG(hw, TDT, tx_tail); E1000_WRITE_FLUSH(hw); - while (!(le32_to_cpu(txp->upper.data) & E1000_TXD_STAT_DD)) { + while (1) { + invalidate_dcache_range(flush_start, flush_end); + if (le32_to_cpu(txp->upper.data) & E1000_TXD_STAT_DD) + break; if (i++ > TOUT_LOOP) { DEBUGOUT("e1000: tx timeout\n"); return 0;