From: Bin Meng Date: Thu, 4 Jan 2024 23:25:42 +0000 (+0800) Subject: doc: coreboot: Update stale graphics enabling instructions X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=86efd049344fe160185654548fa9ec1301d78758;p=u-boot.git doc: coreboot: Update stale graphics enabling instructions With latest coreboot (e.g.: v4.22.01), the instructions to enable graphics support has changed. Refresh the doc. Signed-off-by: Bin Meng --- diff --git a/doc/board/coreboot/coreboot.rst b/doc/board/coreboot/coreboot.rst index 10a251c2b6..7154f59c37 100644 --- a/doc/board/coreboot/coreboot.rst +++ b/doc/board/coreboot/coreboot.rst @@ -32,10 +32,9 @@ of _x86boot_start (in arch/x86/cpu/start.S). If you want to use ELF as the coreboot payload, change U-Boot configuration to use CONFIG_OF_EMBED instead of CONFIG_OF_SEPARATE. -To enable video you must enable these options in coreboot: +To enable video you must enable CONFIG_GENERIC_LINEAR_FRAMEBUFFER in coreboot: - - Set framebuffer graphics resolution (1280x1024 32k-color (1:5:5)) - - Keep VESA framebuffer + - Devices->Display->Framebuffer mode->Linear "high resolution" framebuffer At present it seems that for Minnowboard Max, coreboot does not pass through the video information correctly (it always says the resolution is 0x0). This @@ -184,13 +183,13 @@ boot as a coreboot payload, based on a known-good build of coreboot. To update the `coreboot.rom` file which is used: -#. Build coreboot with `CONFIG_LINEAR_FRAMEBUFFER=y`. If using `make menuconfig` - this is under - `Devices ->Display->Framebuffer mode->Linear "high resolution" framebuffer`. +#. Build coreboot with `CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y`. If using + `make menuconfig`, this is under + `Devices->Display->Framebuffer mode->Linear "high resolution" framebuffer`. #. Compress the resulting `coreboot.rom`:: - xz -c /path/to/coreboot/build/coreboot.rom >coreboot.rom.xz + xz -c /path/to/coreboot/build/coreboot.rom > coreboot.rom.xz #. Upload the file to Google drive