From: Tomas Paukrt Date: Wed, 28 Aug 2024 13:09:48 +0000 (+0200) Subject: gpio: mxc_gpio: fix reading state of GPIO pins in output mode X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=75e8b677b7cc9a4ffddcf90d5c41afa7b7a19658;p=u-boot.git gpio: mxc_gpio: fix reading state of GPIO pins in output mode The PSR register works correctly for GPIO pins in input mode, but always returns 0 for GPIO pins in output mode unless the SION bit is set. The DR register should be used for GPIO pins in output mode to allow correct getting of previously set output value. Please note that the Linux gpio-mxc driver and the NXP U-Boot mxc_gpio driver already use the DR register for all GPIO pins in output mode: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=442b2494b17d1a4f0a14721580271eb23ebffd42 https://github.com/nxp-imx/uboot-imx/commit/4afc3f90943c6b117f79b66d2cd04e64f437b0c2 Signed-off-by: Tomas Paukrt Reviewed-by: Marek Vasut Reviewed-by: Fabio Estevam Tested-by: Fabio Estevam --- diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c index cac6b32b27..28176e15b7 100644 --- a/drivers/gpio/mxc_gpio.c +++ b/drivers/gpio/mxc_gpio.c @@ -133,7 +133,10 @@ int gpio_get_value(unsigned gpio) regs = (struct gpio_regs *)gpio_ports[port]; - val = (readl(®s->gpio_psr) >> gpio) & 0x01; + if ((readl(®s->gpio_dir) >> gpio) & 0x01) + val = (readl(®s->gpio_dr) >> gpio) & 0x01; + else + val = (readl(®s->gpio_psr) >> gpio) & 0x01; return val; } @@ -210,7 +213,10 @@ static void mxc_gpio_bank_set_value(struct gpio_regs *regs, int offset, static int mxc_gpio_bank_get_value(struct gpio_regs *regs, int offset) { - return (readl(®s->gpio_psr) >> offset) & 0x01; + if ((readl(®s->gpio_dir) >> offset) & 0x01) + return (readl(®s->gpio_dr) >> offset) & 0x01; + else + return (readl(®s->gpio_psr) >> offset) & 0x01; } /* set GPIO pin 'gpio' as an input */