From: Stefan Roese Date: Mon, 24 Apr 2017 15:45:24 +0000 (+0300) Subject: phy: marvell: add IGNORE COMPHY type X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=6ecc0b1cdfcb41e567aca53824ba36e50f658273;p=u-boot.git phy: marvell: add IGNORE COMPHY type This type tells u-boot to preserve the COMPHY settings as is it is usefull in situations where the COMPHY was initialized by earlier firmware. Note that IGNORE is different from UNCONNECTED since setting UNCONNECTED type will disconnect the COMPHY in the COMPHY MUX which is a desired behaviour Signed-off-by: Yehuda Yitschak Signed-off-by: Stefan Roese Signed-off-by: Igal Liberman Reviewed-by: Stefan Roese --- diff --git a/drivers/phy/marvell/comphy_core.c b/drivers/phy/marvell/comphy_core.c index d8877e81e2..84f4e5f189 100644 --- a/drivers/phy/marvell/comphy_core.c +++ b/drivers/phy/marvell/comphy_core.c @@ -37,7 +37,7 @@ static char *get_type_string(u32 type) "SGMII1", "SGMII2", "SGMII3", "QSGMII", "USB3_HOST0", "USB3_HOST1", "USB3_DEVICE", "XAUI0", "XAUI1", "XAUI2", "XAUI3", - "RXAUI0", "RXAUI1", "SFI"}; + "RXAUI0", "RXAUI1", "SFI", "IGNORE"}; if (type < 0 || type > PHY_TYPE_MAX) return "invalid"; diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c index 8bec0abf75..499aa68368 100644 --- a/drivers/phy/marvell/comphy_cp110.c +++ b/drivers/phy/marvell/comphy_cp110.c @@ -1663,6 +1663,7 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg, } switch (ptr_comphy_map->type) { case PHY_TYPE_UNCONNECTED: + case PHY_TYPE_IGNORE: continue; break; case PHY_TYPE_PEX0: diff --git a/drivers/phy/marvell/comphy_mux.c b/drivers/phy/marvell/comphy_mux.c index 1dc7426b63..b036fb13b9 100644 --- a/drivers/phy/marvell/comphy_mux.c +++ b/drivers/phy/marvell/comphy_mux.c @@ -27,6 +27,10 @@ static void comphy_mux_check_config(struct comphy_mux_data *mux_data, for (lane = 0; lane < comphy_max_lanes; lane++, comphy_map_data++, mux_data++) { + /* Don't check ignored COMPHYs */ + if (comphy_map_data->type == PHY_TYPE_IGNORE) + continue; + mux_opt = mux_data->mux_values; for (opt = 0, valid = 0; opt < mux_data->max_lane_values; opt++, mux_opt++) { @@ -83,6 +87,9 @@ static void comphy_mux_reg_write(struct comphy_mux_data *mux_data, for (lane = 0; lane < comphy_max_lanes; lane++, comphy_map_data++, mux_data++) { + if (comphy_map_data->type == PHY_TYPE_IGNORE) + continue; + offset = lane * bitcount; mask = (((1 << bitcount) - 1) << offset); value = (comphy_mux_get_mux_value(mux_data, diff --git a/include/dt-bindings/comphy/comphy_data.h b/include/dt-bindings/comphy/comphy_data.h index d127388371..5eb32ef684 100644 --- a/include/dt-bindings/comphy/comphy_data.h +++ b/include/dt-bindings/comphy/comphy_data.h @@ -43,7 +43,8 @@ #define PHY_TYPE_RXAUI0 21 #define PHY_TYPE_RXAUI1 22 #define PHY_TYPE_SFI 23 -#define PHY_TYPE_MAX 24 +#define PHY_TYPE_IGNORE 24 +#define PHY_TYPE_MAX 25 #define PHY_TYPE_INVALID 0xff #define PHY_POLARITY_NO_INVERT 0