From: Christophe Leroy Date: Mon, 30 Jan 2023 08:07:38 +0000 (+0100) Subject: board: cssi: Add MIAE & VGoIP devices X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=6a8c36b936ab69a7521ec1ecfd20f7b85f7f59c5;p=u-boot.git board: cssi: Add MIAE & VGoIP devices This adds support for the MIAE and VGoIP devices. Those devices have the same CPU board that the MCR3000_2G board. The devices are very modular, they are provided with interchangeable front and back panels. Linux kernel is shipped with a device tree which contains all possible setups, and U-boot eliminates unrelated nodes based on detected hardware. This patch was originally written by Charles Frey who's email address is not valid anymore as he left the company. Signed-off-by: Christophe Leroy Reviewed-by: FRANJOU Stephane --- diff --git a/board/cssi/cmpc885/cmpc885.c b/board/cssi/cmpc885/cmpc885.c index cde9a558ef..5233c24aae 100644 --- a/board/cssi/cmpc885/cmpc885.c +++ b/board/cssi/cmpc885/cmpc885.c @@ -29,8 +29,16 @@ DECLARE_GLOBAL_DATA_PTR; #define BOARD_CMPC885 "cmpc885" #define BOARD_MCR3000_2G "mcr3k_2g" +#define BOARD_VGOIP "vgoip" +#define BOARD_MIAE "miae" #define TYPE_MCR 0x22 +#define TYPE_MIAE 0x23 + +#define FAR_CASRSA 2 +#define FAR_VGOIP 4 +#define FAV_CLA 7 +#define FAV_SRSA 8 #define ADDR_CPLD_R_RESET ((unsigned short __iomem *)CONFIG_CPLD_BASE) #define ADDR_CPLD_R_ETAT ((unsigned short __iomem *)(CONFIG_CPLD_BASE + 2)) @@ -38,6 +46,12 @@ DECLARE_GLOBAL_DATA_PTR; #define ADDR_FPGA_R_BASE ((unsigned char __iomem *)CONFIG_FPGA_BASE) #define ADDR_FPGA_R_ALARMES_IN ((unsigned char __iomem *)CONFIG_FPGA_BASE + 0x31) +#define ADDR_FPGA_R_FAV ((unsigned char __iomem *)CONFIG_FPGA_BASE + 0x44) + +#define PATH_PHY2 "/soc@ff000000/mdio@e00/ethernet-phy@2" +#define PATH_PHY3 "/soc@ff000000/mdio@e00/ethernet-phy@3" +#define PATH_ETH1 "/soc@ff000000/ethernet@1e00" +#define FIBER_PHY PATH_PHY2 #define FPGA_R_ACQ_AL_FAV 0x04 #define R_ETAT_PRES_BASE 0x0040 @@ -45,15 +59,68 @@ DECLARE_GLOBAL_DATA_PTR; #define R_RESET_STATUS 0x0400 #define R_RST_STATUS 0x0004 +static int fdt_set_node_and_value(void *blob, char *node, const char *prop, + void *var, int size) +{ + int ret, off; + + off = fdt_path_offset(blob, node); + + if (off < 0) { + printf("Cannot find %s node err:%s\n", node, fdt_strerror(off)); + + return off; + } + + ret = fdt_setprop(blob, off, prop, var, size); + + if (ret < 0) + printf("Cannot set %s/%s prop err: %s\n", node, prop, fdt_strerror(ret)); + + return ret; +} + +/* Checks front/rear id and remove unneeded nodes from the blob */ +static void ft_cleanup(void *blob, uint32_t id, const char *prop, const char *compatible) +{ + int off; + + off = fdt_node_offset_by_compatible(blob, -1, compatible); + + while (off != -FDT_ERR_NOTFOUND) { + const struct fdt_property *ids; + int nb_ids, idx; + int tmp = -1; + + ids = fdt_get_property(blob, off, prop, &nb_ids); + + for (idx = 0; idx < nb_ids; idx += 4) { + if (*((uint32_t *)&ids->data[idx]) == id) + break; + } + + if (idx >= nb_ids) + fdt_del_node(blob, off); + else + tmp = off; + + off = fdt_node_offset_by_compatible(blob, tmp, compatible); + } + + fdt_set_node_and_value(blob, "/", prop, &id, sizeof(uint32_t)); +} + int ft_board_setup(void *blob, struct bd_info *bd) { + u8 fav_id, far_id; + const char *sync = "receive"; ft_cpu_setup(blob, bd); /* BRG */ - do_fixup_by_path_u32(blob, "/soc/cpm", "brg-frequency", - bd->bi_busfreq, 1); + do_fixup_by_path_u32(blob, "/soc/cpm", "brg-frequency", bd->bi_busfreq, 1); + /* MAC addr */ fdt_fixup_ethernet(blob); @@ -67,8 +134,33 @@ int ft_board_setup(void *blob, struct bd_info *bd) do_fixup_by_path_u32(blob, "/localbus/e1", "channel-phase", 0, 1); /* E1 interface - rising edge sync pulse transmit */ - do_fixup_by_path(blob, "/localbus/e1", "rising-edge-sync-pulse", - sync, strlen(sync), 1); + do_fixup_by_path(blob, "/localbus/e1", "rising-edge-sync-pulse", sync, strlen(sync), 1); + + /* MIAE only */ + if (!(in_be16(ADDR_CPLD_R_ETAT) & R_ETAT_PRES_BASE) || in_8(ADDR_FPGA_R_BASE) != TYPE_MIAE) + return 0; + + far_id = in_8(ADDR_FPGA_R_BASE + 0x43) >> 5; + ft_cleanup(blob, (u32)far_id, "far-id", "cs,mia-far"); + + /* + * special case, with CASRSA (far_id: 2) + * FAV-SRSA register itself as FAV-CLA + */ + fav_id = in_8(ADDR_FPGA_R_BASE + 0x44) >> 5; + + if (far_id == FAR_CASRSA && fav_id == FAV_CLA) + fav_id = FAV_SRSA; + + ft_cleanup(blob, (u32)fav_id, "fav-id", "cs,mia-fav"); + + if (far_id == FAR_CASRSA) { + /* switch to phy3 with gpio, we'll only use phy3 */ + immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR; + cpm8xx_t __iomem *cp = (cpm8xx_t __iomem *)&immr->im_cpm; + + setbits_be32(&cp->cp_pedat, 0x00002000); + } return 0; } @@ -80,8 +172,18 @@ int checkboard(void) /* Is a motherboard present ? */ if (in_be16(ADDR_CPLD_R_ETAT) & R_ETAT_PRES_BASE) { switch (in_8(ADDR_FPGA_R_BASE)) { + int far_id; case TYPE_MCR: printf("MCR3000_2G (CS GROUP)\n"); + break; + case TYPE_MIAE: + far_id = in_8(ADDR_FPGA_R_BASE + 0x43) >> 5; + + if (far_id == FAR_VGOIP) + printf("VGoIP (CS GROUP)\n"); + else + printf("MIAE (CS GROUP)\n"); + break; default: printf("Unknown\n"); @@ -149,7 +251,8 @@ static int setup_mac(void) int misc_init_r(void) { - u8 val; + u8 val, tmp, far_id; + int count = 3; val = in_8(ADDR_FPGA_R_BASE); @@ -165,6 +268,31 @@ int misc_init_r(void) env_set("config", BOARD_MCR3000_2G); env_set("hostname", BOARD_MCR3000_2G); break; + + case TYPE_MIAE: + do { + tmp = in_8(ADDR_FPGA_R_BASE + 0x41); + count--; + mdelay(10); /* 10msec wait */ + } while (count && tmp != in_8(ADDR_FPGA_R_BASE + 0x41)); + + if (!count) { + printf("Cannot read the reset factory switch position\n"); + hang(); + } + + if (tmp & 0x1) + env_set_default("Factory settings switch ON", 0); + + env_set("config", BOARD_MIAE); + far_id = in_8(ADDR_FPGA_R_BASE + 0x43) >> 5; + + if (far_id == FAR_VGOIP) + env_set("hostname", BOARD_VGOIP); + else + env_set("hostname", BOARD_MIAE); + break; + default: env_set("config", BOARD_CMPC885); env_set("hostname", BOARD_CMPC885); @@ -488,6 +616,150 @@ static void iop_setup_cmpc885(void) clrbits_be32(&cp->cp_peso, 0x00031980); } +static void iop_setup_miae(void) +{ + immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR; + iop8xx_t __iomem *iop = &immr->im_ioport; + cpm8xx_t __iomem *cp = &immr->im_cpm; + + /* Wait reset on FPGA_F */ + udelay(100); + + /* Set the front panel LED color to red */ + clrbits_8(ADDR_FPGA_R_FAV, 0x02); + + /* We must initialize data before changing direction */ + setbits_be16(&iop->iop_pcdat, 0x0888); + setbits_be16(&iop->iop_pddat, 0x0201); + setbits_be32(&cp->cp_pbdat, 0x00021510); + setbits_be32(&cp->cp_pedat, 0x00000002); + + /* + * PAPAR[13] = 1 [0x0004] -> GPIO: (RXD2) + * PAPAR[12] = 1 [0x0008] -> GPIO: (TXD2) + * PAPAR[9] = 1 [0x0040] -> GPIO: (TDM1O) + * PAPAR[8] = 1 [0x0080] -> GPIO: (TDM1I) + * PAPAR[7] = 1 [0x0100] -> GPIO: (TDM_BCLK_MPC) + * PAPAR[6] = 1 [0x0200] -> GPIO: (CLK2) + */ + setbits_be16(&iop->iop_papar, 0x03CC); + + /* + * PBODR[16] = 0 [0x00008000] -> GPIO: (L1ST4) + */ + clrbits_be16(&cp->cp_pbodr, 0x00008000); + + /* + * PBDIR[27] = 1 [0x00000010] -> GPIO: (WR_TEMP2) + * PBDIR[26] = 1 [0x00000020] -> GPIO: (BRG02) + * PBDIR[23] = 1 [0x00000100] -> GPIO: (CS_TEMP2) + * PBDIR[18] = 1 [0x00002000] -> GPIO: (RTS2) + * PBDIR[16] = 0 [0x00008000] -> GPIO: (L1ST4) + * PBDIR[15] = 1 [0x00010000] -> GPIO: (BRG03) + * PBDIR[14] = 1 [0x00020000] -> GPIO: (CS_TEMP) + */ + clrsetbits_be32(&cp->cp_pbdir, 0x0003A130, 0x00032130); + + /* + * PBPAR[20] = 1 [0x00000800] -> GPIO: (SMRXD2) + * PBPAR[17] = 1 [0x00004000] -> GPIO: (L1ST3) + * PBPAR[16] = 1 [0x00008000] -> GPIO: (L1ST4) + */ + setbits_be32(&cp->cp_pbpar, 0x0000C800); + + /* + * PCPAR[14] = 1 [0x0002] -> GPIO: (L1ST2) + */ + setbits_be16(&iop->iop_pcpar, 0x0002); + + /* + * PDPAR[14] = 1 [0x0002] -> GPIO: (TDM_FS_MPC) + * PDPAR[11] = 1 [0x0010] -> GPIO: (RXD3) + * PDPAR[10] = 1 [0x0020] -> GPIO: (TXD3) + * PDPAR[9] = 1 [0x0040] -> GPIO: (TXD4) + * PDPAR[7] = 1 [0x0100] -> GPIO: (RTS3) + * PDPAR[5] = 1 [0x0400] -> GPIO: (CLK8) + * PDPAR[3] = 1 [0x1000] -> GPIO: (CLK7) + */ + setbits_be16(&iop->iop_pdpar, 0x1572); + + /* + * PEPAR[27] = 1 [0x00000010] -> GPIO: (R2_RXER) + * PEPAR[26] = 1 [0x00000020] -> GPIO: (R2_CRS_DV) + * PEPAR[25] = 1 [0x00000040] -> GPIO: (RXD4) + * PEPAR[24] = 1 [0x00000080] -> GPIO: (BRG01) + * PEPAR[23] = 1 [0x00000100] -> GPIO: (L1ST1) + * PEPAR[22] = 1 [0x00000200] -> GPIO: (R2_RXD1) + * PEPAR[21] = 1 [0x00000400] -> GPIO: (R2_RXD0) + * PEPAR[20] = 1 [0x00000800] -> GPIO: (SMTXD2) + * PEPAR[19] = 1 [0x00001000] -> GPIO: (R2_TXEN) + * PEPAR[17] = 1 [0x00004000] -> GPIO: (CLK5) + * PEPAR[16] = 1 [0x00008000] -> GPIO: (R2_REF_CLK) + * PEPAR[15] = 1 [0x00010000] -> GPIO: (R2_TXD1) + * PEPAR[14] = 1 [0x00020000] -> GPIO: (R2_TXD0) + */ + setbits_be32(&cp->cp_pepar, 0x0003DFF0); + + /* + * PADIR[9] = 1 [0x0040] -> GPIO: (TDM1O) + * PADIR[8] = 1 [0x0080] -> GPIO: (TDM1I) + * PADIR[5] = 0 [0x0400] -> GPIO: () + */ + clrsetbits_be16(&iop->iop_padir, 0x04C0, 0x00C0); + + /* + * PCDIR[15] = 1 [0x0001] -> GPIO: (WP_EEPROM2) + * PCDIR[14] = 1 [0x0002] -> GPIO: (L1ST2) + * PCDIR[13] = 0 [0x0004] -> GPIO: () + * PCDIR[12] = 1 [0x0008] -> GPIO: (CS_EEPROM2) + * PCDIR[8] = 1 [0x0080] -> GPIO: (CS_CODEC_2) + * PCDIR[4] = 1 [0x0800] -> GPIO: (CS_CODEC_1) + */ + clrsetbits_be16(&iop->iop_pcdir, 0x088F, 0x088B); + + /* + * PDDIR[9] = 1 [0x0040] -> GPIO: (TXD4) + * PDDIR[6] = 1 [0x0200] -> GPIO: (CS_CODEC_3) + */ + setbits_be16(&iop->iop_pddir, 0x0240); + + /* + * PEDIR[30] = 1 [0x00000002] -> GPIO: (FPGA_FIRMWARE) + * PEDIR[27] = 1 [0x00000010] -> GPIO: (R2_RXER) + * PEDIR[26] = 1 [0x00000020] -> GPIO: (R2_CRS_DV) + * PEDIR[23] = 1 [0x00000100] -> GPIO: (L1ST1) + * PEDIR[22] = 1 [0x00000200] -> GPIO: (R2_RXD1) + * PEDIR[21] = 1 [0x00000400] -> GPIO: (R2_RXD0) + * PEDIR[19] = 1 [0x00001000] -> GPIO: (R2_TXEN) + * PEDIR[18] = 1 [0x00002000] -> GPIO: (PE18) + * PEDIR[16] = 1 [0x00008000] -> GPIO: (R2_REF_CLK) + * PEDIR[15] = 1 [0x00010000] -> GPIO: (R2_TXD1) + * PEDIR[14] = 1 [0x00020000] -> GPIO: (R2_TXD0) + */ + setbits_be32(&cp->cp_pedir, 0x0003B732); + + /* + * PAODR[10] = 1 [0x0020] -> GPIO: (INIT_FPGA_F) + */ + setbits_be16(&iop->iop_paodr, 0x0020); + + /* + * PEODR[30] = 1 [0x00000002] -> GPIO: (FPGA_FIRMWARE) + * PEODR[18] = 0 [0x00002000] -> GPIO: (PE18) + */ + clrsetbits_be32(&cp->cp_peodr, 0x00002002, 0x00000002); + + /* + * PESO[24] = 1 [0x00000080] -> GPIO: (BRG01) + * PESO[23] = 1 [0x00000100] -> GPIO: (L1ST1) + * PESO[20] = 1 [0x00000800] -> GPIO: (SMTXD2) + * PESO[19] = 1 [0x00001000] -> GPIO: (R2_TXEN) + * PESO[15] = 1 [0x00010000] -> GPIO: (R2_TXD1) + * PESO[14] = 1 [0x00020000] -> GPIO: (R2_TXD0) + */ + setbits_be32(&cp->cp_peso, 0x00031980); +} + int board_early_init_f(void) { return 0; @@ -818,6 +1090,10 @@ int board_early_init_r(void) iop_setup_mcr(); break; + case TYPE_MIAE: + iop_setup_miae(); + break; + default: break; }