From: Tim Harvey Date: Fri, 15 Jul 2016 14:14:25 +0000 (-0700) Subject: imx: ventana: make hwconfig initialize based on board configuration X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=5911c0924f403561d8f1f2f437fd9a6efc5ad82a;p=u-boot.git imx: ventana: make hwconfig initialize based on board configuration The hwconfig env var allows user to control hardware specific configuration of board specific features but not all Ventana boards have the same features. We will use the magic default value of "_UNKNOWN_" to signify that the bootloader should create this based on detected board model. Signed-off-by: Tim Harvey --- diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 930cec8c5a..588ea85b9d 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -700,13 +700,14 @@ static const struct boot_mode board_boot_modes[] = { int misc_init_r(void) { struct ventana_board_info *info = &ventana_info; + char buf[256]; + int i; /* set env vars based on EEPROM data */ if (ventana_info.model[0]) { char str[16], fdt[36]; char *p; const char *cputype = ""; - int i; /* * FDT name will be prefixed with CPU type. Three versions @@ -769,6 +770,19 @@ int misc_init_r(void) setenv("mem_mb", str); } + /* Set a non-initialized hwconfig based on board configuration */ + if (!strcmp(getenv("hwconfig"), "_UNKNOWN_")) { + sprintf(buf, "hwconfig="); + if (gpio_cfg[board_type].rs232_en) + strcat(buf, "rs232;"); + for (i = 0; i < gpio_cfg[board_type].dio_num; i++) { + char buf1[32]; + sprintf(buf1, "dio%d:mode=gpio;", i); + if (strlen(buf) + strlen(buf1) < sizeof(buf)) + strcat(buf, buf1); + } + setenv("hwconfig", buf); + } /* setup baseboard specific GPIO based on board and env */ setup_board_gpio(board_type, info); diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 343f3c56bc..1bd13fe6de 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -271,16 +271,13 @@ /* Environment */ #define CONFIG_IPADDR 192.168.1.1 #define CONFIG_SERVERIP 192.168.1.146 -#define HWCONFIG_DEFAULT \ - "hwconfig=rs232;" \ - "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \ #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \ "pcidisable=1\0" \ "usb_pgood_delay=2000\0" \ "console=ttymxc1\0" \ "bootdevs=usb mmc sata flash\0" \ - HWCONFIG_DEFAULT \ + "hwconfig=_UNKNOWN_\0" \ "video=\0" \ \ "mtdparts=" MTDPARTS_DEFAULT "\0" \