From: Conor Dooley Date: Thu, 15 Jun 2023 10:12:43 +0000 (+0100) Subject: riscv: dts: sync mpfs-icicle devicetree with linux X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=4e99899bd546b7cd60735df4b18da6eabdc38cb1;p=u-boot.git riscv: dts: sync mpfs-icicle devicetree with linux The "notable" disappearances are: - the pac193x stanza - there's nothing in mainline linux w.r.t. bindings for this & what is going to appear in mainline linux is going to be incompatible with what is currently in U-Boot. - operating points - these operating points should not be set at the soc.dtsi level as they may not be possible depending on the design programmed to the FPGA - clock output names - there are defines for the clock indices, these should not be needed - the dt maintainers in linux NAKed using defines for IRQ numbers - the qspi nand, which is not part of the icicle's default configuration is removed. Reviewed-by: Padmarao Begari Tested-by: Padmarao Begari Signed-off-by: Conor Dooley Reviewed-by: Rick Chen --- diff --git a/arch/riscv/dts/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/dts/mpfs-icicle-kit-fabric.dtsi new file mode 100644 index 0000000000..1069134f2e --- /dev/null +++ b/arch/riscv/dts/mpfs-icicle-kit-fabric.dtsi @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2021 Microchip Technology Inc */ + +/ { + compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit", + "microchip,mpfs"; + + core_pwm0: pwm@40000000 { + compatible = "microchip,corepwm-rtl-v4"; + reg = <0x0 0x40000000 0x0 0xF0>; + microchip,sync-update-mask = /bits/ 32 <0>; + #pwm-cells = <3>; + clocks = <&ccc_nw CLK_CCC_PLL0_OUT3>; + status = "disabled"; + }; + + i2c2: i2c@40000200 { + compatible = "microchip,corei2c-rtl-v7"; + reg = <0x0 0x40000200 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&ccc_nw CLK_CCC_PLL0_OUT3>; + interrupt-parent = <&plic>; + interrupts = <122>; + clock-frequency = <100000>; + status = "disabled"; + }; + + pcie: pcie@3000000000 { + compatible = "microchip,pcie-host-1.0"; + #address-cells = <0x3>; + #interrupt-cells = <0x1>; + #size-cells = <0x2>; + device_type = "pci"; + reg = <0x30 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>; + reg-names = "cfg", "apb"; + bus-range = <0x0 0x7f>; + interrupt-parent = <&plic>; + interrupts = <119>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + interrupt-map-mask = <0 0 0 7>; + clocks = <&ccc_nw CLK_CCC_PLL0_OUT1>, <&ccc_nw CLK_CCC_PLL0_OUT3>; + clock-names = "fic1", "fic3"; + ranges = <0x3000000 0x0 0x8000000 0x30 0x8000000 0x0 0x80000000>; + dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x1 0x00000000>; + msi-parent = <&pcie>; + msi-controller; + status = "disabled"; + pcie_intc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + + refclk_ccc: cccrefclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; +}; + +&ccc_nw { + clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, + <&refclk_ccc>, <&refclk_ccc>; + clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1", + "dll0_ref", "dll1_ref"; + status = "okay"; +}; diff --git a/arch/riscv/dts/mpfs-icicle-kit.dts b/arch/riscv/dts/mpfs-icicle-kit.dts index 3c56400b92..8aa5fb17d6 100644 --- a/arch/riscv/dts/mpfs-icicle-kit.dts +++ b/arch/riscv/dts/mpfs-icicle-kit.dts @@ -7,29 +7,63 @@ /dts-v1/; #include "mpfs.dtsi" +#include "mpfs-icicle-kit-fabric.dtsi" +#include +#include /* Clock frequency (in Hz) of the rtcclk */ #define RTCCLK_FREQ 1000000 / { model = "Microchip PolarFire-SoC Icicle Kit"; - compatible = "microchip,mpfs-icicle-reference-rtlv2210", - "microchip,mpfs-icicle-kit", "microchip,mpfs"; + compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit", + "microchip,mpfs"; aliases { - serial1 = &uart1; ethernet0 = &mac1; - spi0 = &qspi; + serial0 = &mmuart0; + serial1 = &mmuart1; + serial2 = &mmuart2; + serial3 = &mmuart3; + serial4 = &mmuart4; }; chosen { - stdout-path = "serial1"; + stdout-path = "serial1:115200n8"; }; cpus { timebase-frequency = ; }; + leds { + compatible = "gpio-leds"; + + led-1 { + gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>; + color = ; + label = "led1"; + }; + + led-2 { + gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; + color = ; + label = "led2"; + }; + + led-3 { + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + color = ; + label = "led3"; + }; + + led-4 { + gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; + color = ; + label = "led4"; + }; + }; + ddrc_cache_lo: memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x40000000>; @@ -54,83 +88,121 @@ }; }; -&refclk { - clock-frequency = <125000000>; +&core_pwm0 { + status = "okay"; }; -&uart1 { +&gpio2 { + interrupts = <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>; status = "okay"; }; -&mmc { +&i2c0 { status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; +&mac0 { + phy-mode = "sgmii"; + phy-handle = <&phy0>; + status = "enabled"; +}; + +&mac1 { + phy-mode = "sgmii"; + phy-handle = <&phy1>; + status = "okay"; + + phy1: ethernet-phy@9 { + reg = <9>; + }; + + phy0: ethernet-phy@8 { + reg = <8>; + }; +}; + +&mbox { + status = "okay"; +}; + +&mmc { bus-width = <4>; disable-wp; - cap-mmc-highspeed; cap-sd-highspeed; - card-detect-delay = <200>; + cap-mmc-highspeed; mmc-ddr-1_8v; mmc-hs200-1_8v; sd-uhs-sdr12; sd-uhs-sdr25; sd-uhs-sdr50; sd-uhs-sdr104; + status = "okay"; }; -&i2c1 { +&mmuart1 { status = "okay"; - clock-frequency = <100000>; +}; - pac193x: pac193x@10 { - compatible = "microchip,pac1934"; - reg = <0x10>; - samp-rate = <64>; - status = "okay"; - ch1: channel0 { - uohms-shunt-res = <10000>; - rail-name = "VDDREG"; - channel_enabled; - }; - ch2: channel1 { - uohms-shunt-res = <10000>; - rail-name = "VDDA25"; - channel_enabled; - }; - ch3: channel2 { - uohms-shunt-res = <10000>; - rail-name = "VDD25"; - channel_enabled; - }; - ch4: channel3 { - uohms-shunt-res = <10000>; - rail-name = "VDDA_REG"; - channel_enabled; - }; - }; +&mmuart2 { + status = "okay"; }; -&mac1 { +&mmuart3 { + status = "okay"; +}; + +&mmuart4 { + status = "okay"; +}; + +&pcie { status = "okay"; - phy-mode = "sgmii"; - phy-handle = <&phy1>; - phy1: ethernet-phy@9 { - reg = <9>; - ti,fifo-depth = <0x1>; - }; }; &qspi { status = "okay"; - num-cs = <1>; +}; - flash0: flash@0 { - compatible = "spi-nand"; - reg = <0x0>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - spi-max-frequency = <20000000>; - spi-cpol; - spi-cpha; - }; +&refclk { + clock-frequency = <125000000>; +}; + +&refclk_ccc { + clock-frequency = <50000000>; +}; + +&rtc { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&syscontroller { + status = "okay"; +}; + +&usb { + status = "okay"; + dr_mode = "host"; }; diff --git a/arch/riscv/dts/mpfs.dtsi b/arch/riscv/dts/mpfs.dtsi index 891dd0918b..6012a28507 100644 --- a/arch/riscv/dts/mpfs.dtsi +++ b/arch/riscv/dts/mpfs.dtsi @@ -2,8 +2,6 @@ /* Copyright (c) 2020-2021 Microchip Technology Inc */ #include "dt-bindings/clock/microchip-mpfs-clock.h" -#include "dt-bindings/interrupt-controller/microchip-mpfs-plic.h" -#include "dt-bindings/interrupt-controller/riscv-hart.h" / { #address-cells = <2>; @@ -11,9 +9,6 @@ model = "Microchip PolarFire SoC"; compatible = "microchip,mpfs"; - chosen { - }; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -28,12 +23,7 @@ riscv,isa = "rv64imac"; clocks = <&clkcfg CLK_CPU>; status = "disabled"; - operating-points = < - /* kHz uV */ - 600000 1100000 - 300000 950000 - 150000 750000 - >; + cpu0_intc: interrupt-controller { #interrupt-cells = <1>; compatible = "riscv,cpu-intc"; @@ -59,13 +49,9 @@ riscv,isa = "rv64imafdc"; clocks = <&clkcfg CLK_CPU>; tlb-split; + next-level-cache = <&cctrllr>; status = "okay"; - operating-points = < - /* kHz uV */ - 600000 1100000 - 300000 950000 - 150000 750000 - >; + cpu1_intc: interrupt-controller { #interrupt-cells = <1>; compatible = "riscv,cpu-intc"; @@ -91,13 +77,9 @@ riscv,isa = "rv64imafdc"; clocks = <&clkcfg CLK_CPU>; tlb-split; + next-level-cache = <&cctrllr>; status = "okay"; - operating-points = < - /* kHz uV */ - 600000 1100000 - 300000 950000 - 150000 750000 - >; + cpu2_intc: interrupt-controller { #interrupt-cells = <1>; compatible = "riscv,cpu-intc"; @@ -123,13 +105,9 @@ riscv,isa = "rv64imafdc"; clocks = <&clkcfg CLK_CPU>; tlb-split; + next-level-cache = <&cctrllr>; status = "okay"; - operating-points = < - /* kHz uV */ - 600000 1100000 - 300000 950000 - 150000 750000 - >; + cpu3_intc: interrupt-controller { #interrupt-cells = <1>; compatible = "riscv,cpu-intc"; @@ -155,273 +133,322 @@ riscv,isa = "rv64imafdc"; clocks = <&clkcfg CLK_CPU>; tlb-split; + next-level-cache = <&cctrllr>; status = "okay"; - operating-points = < - /* kHz uV */ - 600000 1100000 - 300000 950000 - 150000 750000 - >; cpu4_intc: interrupt-controller { #interrupt-cells = <1>; compatible = "riscv,cpu-intc"; interrupt-controller; }; }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + + core4 { + cpu = <&cpu4>; + }; + }; + }; }; - refclk: refclk { + refclk: mssrefclk { compatible = "fixed-clock"; #clock-cells = <0>; }; + syscontroller: syscontroller { + compatible = "microchip,mpfs-sys-controller"; + mboxes = <&mbox 0>; + }; + soc { #address-cells = <2>; #size-cells = <2>; - compatible = "microchip,mpfs-soc", "simple-bus"; + compatible = "simple-bus"; ranges; - clint: clint@2000000 { - compatible = "sifive,clint0"; - reg = <0x0 0x2000000 0x0 0xC000>; - interrupts-extended = - <&cpu0_intc HART_INT_M_SOFT &cpu0_intc HART_INT_M_TIMER - &cpu1_intc HART_INT_M_SOFT &cpu1_intc HART_INT_M_TIMER - &cpu2_intc HART_INT_M_SOFT &cpu2_intc HART_INT_M_TIMER - &cpu3_intc HART_INT_M_SOFT &cpu3_intc HART_INT_M_TIMER - &cpu4_intc HART_INT_M_SOFT &cpu4_intc HART_INT_M_TIMER>; - }; - - cachecontroller: cache-controller@2010000 { - compatible = "sifive,fu540-c000-ccache", "cache"; + cctrllr: cache-controller@2010000 { + compatible = "microchip,mpfs-ccache", "sifive,fu540-c000-ccache", "cache"; reg = <0x0 0x2010000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupts = ; cache-block-size = <64>; cache-level = <2>; cache-sets = <1024>; cache-size = <2097152>; cache-unified; + interrupt-parent = <&plic>; + interrupts = <1>, <3>, <4>, <2>; }; - pdma: pdma@3000000 { - compatible = "microchip,mpfs-pdma-uio","sifive,fu540-c000-pdma"; - reg = <0x0 0x3000000 0x0 0x8000>; - interrupt-parent = <&plic>; - interrupts = ; - #dma-cells = <1>; + clint: clint@2000000 { + compatible = "sifive,fu540-c000-clint", "sifive,clint0"; + reg = <0x0 0x2000000 0x0 0xC000>; + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, + <&cpu1_intc 3>, <&cpu1_intc 7>, + <&cpu2_intc 3>, <&cpu2_intc 7>, + <&cpu3_intc 3>, <&cpu3_intc 7>, + <&cpu4_intc 3>, <&cpu4_intc 7>; }; plic: interrupt-controller@c000000 { - compatible = "sifive,plic-1.0.0"; + compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0"; reg = <0x0 0xc000000 0x0 0x4000000>; + #address-cells = <0>; #interrupt-cells = <1>; - riscv,ndev = <186>; interrupt-controller; - interrupts-extended = <&cpu0_intc HART_INT_M_EXT - &cpu1_intc HART_INT_M_EXT &cpu1_intc HART_INT_S_EXT - &cpu2_intc HART_INT_M_EXT &cpu2_intc HART_INT_S_EXT - &cpu3_intc HART_INT_M_EXT &cpu3_intc HART_INT_S_EXT - &cpu4_intc HART_INT_M_EXT &cpu4_intc HART_INT_S_EXT>; + interrupts-extended = <&cpu0_intc 11>, + <&cpu1_intc 11>, <&cpu1_intc 9>, + <&cpu2_intc 11>, <&cpu2_intc 9>, + <&cpu3_intc 11>, <&cpu3_intc 9>, + <&cpu4_intc 11>, <&cpu4_intc 9>; + riscv,ndev = <186>; + }; + + pdma: dma-controller@3000000 { + compatible = "sifive,fu540-c000-pdma", "sifive,pdma0"; + reg = <0x0 0x3000000 0x0 0x8000>; + interrupt-parent = <&plic>; + interrupts = <5 6>, <7 8>, <9 10>, <11 12>; + dma-channels = <4>; + #dma-cells = <1>; }; clkcfg: clkcfg@20002000 { compatible = "microchip,mpfs-clkcfg"; reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>; - reg-names = "mss_sysreg"; clocks = <&refclk>; #clock-cells = <1>; - clock-output-names = "cpu", "axi", "ahb", "envm", /* 0-3 */ - "mac0", "mac1", "mmc", "timer", /* 4-7 */ - "mmuart0", "mmuart1", "mmuart2", "mmuart3", /* 8-11 */ - "mmuart4", "spi0", "spi1", "i2c0", /* 12-15 */ - "i2c1", "can0", "can1", "usb", /* 16-19 */ - "rsvd", "rtc", "qspi", "gpio0", /* 20-23 */ - "gpio1", "gpio2", "ddrc", "fic0", /* 24-27 */ - "fic1", "fic2", "fic3", "athena", "cfm"; /* 28-32 */ + #reset-cells = <1>; }; - /* Common node entry for eMMC/SD */ - mmc: mmc@20008000 { - compatible = "microchip,mpfs-sd4hc","cdns,sd4hc"; - reg = <0x0 0x20008000 0x0 0x1000>; - clocks = <&clkcfg CLK_MMC>; - interrupt-parent = <&plic>; - interrupts = ; - max-frequency = <200000000>; + ccc_se: clock-controller@38010000 { + compatible = "microchip,mpfs-ccc"; + reg = <0x0 0x38010000 0x0 0x1000>, <0x0 0x38020000 0x0 0x1000>, + <0x0 0x39010000 0x0 0x1000>, <0x0 0x39020000 0x0 0x1000>; + #clock-cells = <1>; + status = "disabled"; + }; + + ccc_ne: clock-controller@38040000 { + compatible = "microchip,mpfs-ccc"; + reg = <0x0 0x38040000 0x0 0x1000>, <0x0 0x38080000 0x0 0x1000>, + <0x0 0x39040000 0x0 0x1000>, <0x0 0x39080000 0x0 0x1000>; + #clock-cells = <1>; status = "disabled"; }; - uart0: serial@20000000 { + ccc_nw: clock-controller@38100000 { + compatible = "microchip,mpfs-ccc"; + reg = <0x0 0x38100000 0x0 0x1000>, <0x0 0x38200000 0x0 0x1000>, + <0x0 0x39100000 0x0 0x1000>, <0x0 0x39200000 0x0 0x1000>; + #clock-cells = <1>; + status = "disabled"; + }; + + ccc_sw: clock-controller@38400000 { + compatible = "microchip,mpfs-ccc"; + reg = <0x0 0x38400000 0x0 0x1000>, <0x0 0x38800000 0x0 0x1000>, + <0x0 0x39400000 0x0 0x1000>, <0x0 0x39800000 0x0 0x1000>; + #clock-cells = <1>; + status = "disabled"; + }; + + mmuart0: serial@20000000 { compatible = "ns16550a"; reg = <0x0 0x20000000 0x0 0x400>; reg-io-width = <4>; reg-shift = <2>; interrupt-parent = <&plic>; - interrupts = ; + interrupts = <90>; + current-speed = <115200>; clocks = <&clkcfg CLK_MMUART0>; status = "disabled"; /* Reserved for the HSS */ }; - uart1: serial@20100000 { + mmuart1: serial@20100000 { compatible = "ns16550a"; reg = <0x0 0x20100000 0x0 0x400>; reg-io-width = <4>; reg-shift = <2>; interrupt-parent = <&plic>; - interrupts = ; + interrupts = <91>; + current-speed = <115200>; clocks = <&clkcfg CLK_MMUART1>; status = "disabled"; }; - uart2: serial@20102000 { + mmuart2: serial@20102000 { compatible = "ns16550a"; reg = <0x0 0x20102000 0x0 0x400>; reg-io-width = <4>; reg-shift = <2>; interrupt-parent = <&plic>; - interrupts = ; + interrupts = <92>; + current-speed = <115200>; clocks = <&clkcfg CLK_MMUART2>; status = "disabled"; }; - uart3: serial@20104000 { + mmuart3: serial@20104000 { compatible = "ns16550a"; reg = <0x0 0x20104000 0x0 0x400>; reg-io-width = <4>; reg-shift = <2>; interrupt-parent = <&plic>; - interrupts = ; + interrupts = <93>; + current-speed = <115200>; clocks = <&clkcfg CLK_MMUART3>; status = "disabled"; }; - uart4: serial@20106000 { + mmuart4: serial@20106000 { compatible = "ns16550a"; reg = <0x0 0x20106000 0x0 0x400>; reg-io-width = <4>; reg-shift = <2>; interrupt-parent = <&plic>; - interrupts = ; + interrupts = <94>; clocks = <&clkcfg CLK_MMUART4>; + current-speed = <115200>; + status = "disabled"; + }; + + /* Common node entry for emmc/sd */ + mmc: mmc@20008000 { + compatible = "microchip,mpfs-sd4hc", "cdns,sd4hc"; + reg = <0x0 0x20008000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <88>; + clocks = <&clkcfg CLK_MMC>; + max-frequency = <200000000>; status = "disabled"; }; spi0: spi@20108000 { compatible = "microchip,mpfs-spi"; - reg = <0x0 0x20108000 0x0 0x1000>; - clocks = <&clkcfg CLK_SPI0>; - interrupt-parent = <&plic>; - interrupts = ; - num-cs = <8>; #address-cells = <1>; #size-cells = <0>; + reg = <0x0 0x20108000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <54>; + clocks = <&clkcfg CLK_SPI0>; status = "disabled"; }; spi1: spi@20109000 { compatible = "microchip,mpfs-spi"; + #address-cells = <1>; + #size-cells = <0>; reg = <0x0 0x20109000 0x0 0x1000>; - clocks = <&clkcfg CLK_SPI1>; interrupt-parent = <&plic>; - interrupts = ; - num-cs = <8>; + interrupts = <55>; + clocks = <&clkcfg CLK_SPI1>; + status = "disabled"; + }; + + qspi: spi@21000000 { + compatible = "microchip,mpfs-qspi", "microchip,coreqspi-rtl-v2"; #address-cells = <1>; #size-cells = <0>; + reg = <0x0 0x21000000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <85>; + clocks = <&clkcfg CLK_QSPI>; status = "disabled"; }; i2c0: i2c@2010a000 { - compatible = "microchip,mpfs-i2c"; + compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7"; reg = <0x0 0x2010a000 0x0 0x1000>; - clocks = <&clkcfg CLK_I2C0>; - interrupt-parent = <&plic>; - interrupts = ; #address-cells = <1>; #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <58>; + clocks = <&clkcfg CLK_I2C0>; + clock-frequency = <100000>; status = "disabled"; }; i2c1: i2c@2010b000 { - compatible = "microchip,mpfs-i2c"; + compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7"; reg = <0x0 0x2010b000 0x0 0x1000>; - clocks = <&clkcfg CLK_I2C1>; - interrupt-parent = <&plic>; - interrupts = ; #address-cells = <1>; #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <61>; + clocks = <&clkcfg CLK_I2C1>; + clock-frequency = <100000>; status = "disabled"; }; can0: can@2010c000 { - compatible = "microchip,mpfs-can-uio"; + compatible = "microchip,mpfs-can"; reg = <0x0 0x2010c000 0x0 0x1000>; clocks = <&clkcfg CLK_CAN0>; interrupt-parent = <&plic>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; + interrupts = <56>; status = "disabled"; }; can1: can@2010d000 { - compatible = "microchip,mpfs-can-uio"; + compatible = "microchip,mpfs-can"; reg = <0x0 0x2010d000 0x0 0x1000>; clocks = <&clkcfg CLK_CAN1>; interrupt-parent = <&plic>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; + interrupts = <57>; status = "disabled"; }; mac0: ethernet@20110000 { - compatible = "cdns,macb"; + compatible = "microchip,mpfs-macb", "cdns,macb"; reg = <0x0 0x20110000 0x0 0x2000>; - clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>; - clock-names = "pclk", "hclk"; + #address-cells = <1>; + #size-cells = <0>; interrupt-parent = <&plic>; - interrupts = ; + interrupts = <64>, <65>, <66>, <67>, <68>, <69>; local-mac-address = [00 00 00 00 00 00]; + clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>; + clock-names = "pclk", "hclk"; + resets = <&clkcfg CLK_MAC0>; status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; }; mac1: ethernet@20112000 { - compatible = "cdns,macb"; + compatible = "microchip,mpfs-macb", "cdns,macb"; reg = <0x0 0x20112000 0x0 0x2000>; - clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>; - clock-names = "pclk", "hclk"; + #address-cells = <1>; + #size-cells = <0>; interrupt-parent = <&plic>; - interrupts = ; + interrupts = <70>, <71>, <72>, <73>, <74>, <75>; local-mac-address = [00 00 00 00 00 00]; + clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>; + clock-names = "pclk", "hclk"; + resets = <&clkcfg CLK_MAC1>; status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; }; gpio0: gpio@20120000 { compatible = "microchip,mpfs-gpio"; reg = <0x0 0x20120000 0x0 0x1000>; - reg-names = "control"; - clocks = <&clkcfg CLK_GPIO0>; interrupt-parent = <&plic>; + interrupt-controller; + #interrupt-cells = <1>; + clocks = <&clkcfg CLK_GPIO0>; gpio-controller; #gpio-cells = <2>; status = "disabled"; @@ -429,10 +456,11 @@ gpio1: gpio@20121000 { compatible = "microchip,mpfs-gpio"; - reg = <000 0x20121000 0x0 0x1000>; - reg-names = "control"; - clocks = <&clkcfg CLK_GPIO1>; + reg = <0x0 0x20121000 0x0 0x1000>; interrupt-parent = <&plic>; + interrupt-controller; + #interrupt-cells = <1>; + clocks = <&clkcfg CLK_GPIO1>; gpio-controller; #gpio-cells = <2>; status = "disabled"; @@ -441,9 +469,10 @@ gpio2: gpio@20122000 { compatible = "microchip,mpfs-gpio"; reg = <0x0 0x20122000 0x0 0x1000>; - reg-names = "control"; - clocks = <&clkcfg CLK_GPIO2>; interrupt-parent = <&plic>; + interrupt-controller; + #interrupt-cells = <1>; + clocks = <&clkcfg CLK_GPIO2>; gpio-controller; #gpio-cells = <2>; status = "disabled"; @@ -452,118 +481,31 @@ rtc: rtc@20124000 { compatible = "microchip,mpfs-rtc"; reg = <0x0 0x20124000 0x0 0x1000>; - clocks = <&clkcfg CLK_RTC>; - clock-names = "rtc"; interrupt-parent = <&plic>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; + interrupts = <80>, <81>; + clocks = <&clkcfg CLK_RTC>, <&clkcfg CLK_RTCREF>; + clock-names = "rtc", "rtcref"; status = "disabled"; }; usb: usb@20201000 { - compatible = "microchip,mpfs-usb-host"; + compatible = "microchip,mpfs-musb"; reg = <0x0 0x20201000 0x0 0x1000>; - reg-names = "mc","control"; - clocks = <&clkcfg CLK_USB>; interrupt-parent = <&plic>; - interrupts = ; + interrupts = <86>, <87>; + clocks = <&clkcfg CLK_USB>; interrupt-names = "dma","mc"; - dr_mode = "host"; - status = "disabled"; - }; - - qspi: qspi@21000000 { - compatible = "microchip,mpfs-qspi"; - reg = <0x0 0x21000000 0x0 0x1000>; - clocks = <&clkcfg CLK_QSPI>; - interrupt-parent = <&plic>; - interrupts = ; - num-cs = <8>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; mbox: mailbox@37020000 { compatible = "microchip,mpfs-mailbox"; - reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318C 0x0 0x40>; + reg = <0x0 0x37020000 0x0 0x58>, <0x0 0x2000318C 0x0 0x40>, + <0x0 0x37020800 0x0 0x100>; interrupt-parent = <&plic>; - interrupts = ; + interrupts = <96>; #mbox-cells = <1>; status = "disabled"; }; - - pcie: pcie@2000000000 { - compatible = "microchip,pcie-host-1.0"; - #address-cells = <0x3>; - #interrupt-cells = <0x1>; - #size-cells = <0x2>; - device_type = "pci"; - reg = <0x20 0x0 0x0 0x8000000 0x0 0x43000000 0x0 0x10000>; - reg-names = "cfg", "apb"; - clocks = <&clkcfg CLK_FIC0>, <&clkcfg CLK_FIC1>, <&clkcfg CLK_FIC3>; - clock-names = "fic0", "fic1", "fic3"; - bus-range = <0x0 0x7f>; - interrupt-parent = <&plic>; - interrupts = ; - interrupt-map = <0 0 0 1 &pcie_intc 0>, - <0 0 0 2 &pcie_intc 1>, - <0 0 0 3 &pcie_intc 2>, - <0 0 0 4 &pcie_intc 3>; - interrupt-map-mask = <0 0 0 7>; - ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>; - msi-parent = <&pcie>; - msi-controller; - mchp,axi-m-atr0 = <0x10 0x0>; - status = "disabled"; - pcie_intc: legacy-interrupt-controller { - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - }; - }; - - syscontroller: syscontroller { - compatible = "microchip,mpfs-sys-controller"; - #address-cells = <1>; - #size-cells = <1>; - mboxes = <&mbox 0>; - }; - - hwrandom: hwrandom { - compatible = "microchip,mpfs-rng"; - #address-cells = <1>; - #size-cells = <1>; - syscontroller = <&syscontroller>; - }; - - serialnum: serialnum { - compatible = "microchip,mpfs-serial-number"; - #address-cells = <1>; - #size-cells = <1>; - syscontroller = <&syscontroller>; - }; - - fpgadigest: fpgadigest { - compatible = "microchip,mpfs-digest"; - #address-cells = <1>; - #size-cells = <1>; - syscontroller = <&syscontroller>; - }; - - devicecert: cert { - compatible = "microchip,mpfs-device-cert"; - #address-cells = <1>; - #size-cells = <1>; - syscontroller = <&syscontroller>; - }; - - signature: signature { - compatible = "microchip,mpfs-signature"; - #address-cells = <1>; - #size-cells = <1>; - syscontroller = <&syscontroller>; - }; }; }; diff --git a/include/dt-bindings/clock/microchip-mpfs-clock.h b/include/dt-bindings/clock/microchip-mpfs-clock.h index c7ed0a8db7..79775a5134 100644 --- a/include/dt-bindings/clock/microchip-mpfs-clock.h +++ b/include/dt-bindings/clock/microchip-mpfs-clock.h @@ -1,7 +1,7 @@ -/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ /* - * Copyright (C) 2020 Microchip Technology Inc. - * Padmarao Begari + * Daire McNamara, + * Copyright (C) 2020-2022 Microchip Technology Inc. All rights reserved. */ #ifndef _DT_BINDINGS_CLK_MICROCHIP_MPFS_H_ @@ -45,4 +45,27 @@ #define CLK_RTCREF 33 #define CLK_MSSPLL 34 +/* Clock Conditioning Circuitry Clock IDs */ + +#define CLK_CCC_PLL0 0 +#define CLK_CCC_PLL1 1 +#define CLK_CCC_DLL0 2 +#define CLK_CCC_DLL1 3 + +#define CLK_CCC_PLL0_OUT0 4 +#define CLK_CCC_PLL0_OUT1 5 +#define CLK_CCC_PLL0_OUT2 6 +#define CLK_CCC_PLL0_OUT3 7 + +#define CLK_CCC_PLL1_OUT0 8 +#define CLK_CCC_PLL1_OUT1 9 +#define CLK_CCC_PLL1_OUT2 10 +#define CLK_CCC_PLL1_OUT3 11 + +#define CLK_CCC_DLL0_OUT0 12 +#define CLK_CCC_DLL0_OUT1 13 + +#define CLK_CCC_DLL1_OUT0 14 +#define CLK_CCC_DLL1_OUT1 15 + #endif /* _DT_BINDINGS_CLK_MICROCHIP_MPFS_H_ */ diff --git a/include/dt-bindings/interrupt-controller/microchip-mpfs-plic.h b/include/dt-bindings/interrupt-controller/microchip-mpfs-plic.h deleted file mode 100644 index eba1bac7df..0000000000 --- a/include/dt-bindings/interrupt-controller/microchip-mpfs-plic.h +++ /dev/null @@ -1,196 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ -/* Copyright (c) 2020-2021 Microchip Technology Inc */ - -#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_MICROCHIP_MPFS_PLIC_H -#define _DT_BINDINGS_INTERRUPT_CONTROLLER_MICROCHIP_MPFS_PLIC_H - -#define PLIC_INT_INVALID 0 -#define PLIC_INT_L2_METADATA_CORR 1 -#define PLIC_INT_L2_METADATA_UNCORR 2 -#define PLIC_INT_L2_DATA_CORR 3 -#define PLIC_INT_L2_DATA_UNCORR 4 -#define PLIC_INT_DMA_CH0_DONE 5 -#define PLIC_INT_DMA_CH0_ERR 6 -#define PLIC_INT_DMA_CH1_DONE 7 -#define PLIC_INT_DMA_CH1_ERR 8 -#define PLIC_INT_DMA_CH2_DONE 9 -#define PLIC_INT_DMA_CH2_ERR 10 -#define PLIC_INT_DMA_CH3_DONE 11 -#define PLIC_INT_DMA_CH3_ERR 12 - -#define PLIC_INT_GPIO0_BIT0_OR_GPIO2_BIT0 13 -#define PLIC_INT_GPIO0_BIT1_OR_GPIO2_BIT1 14 -#define PLIC_INT_GPIO0_BIT2_OR_GPIO2_BIT2 15 -#define PLIC_INT_GPIO0_BIT3_OR_GPIO2_BIT3 16 -#define PLIC_INT_GPIO0_BIT4_OR_GPIO2_BIT4 17 -#define PLIC_INT_GPIO0_BIT5_OR_GPIO2_BIT5 18 -#define PLIC_INT_GPIO0_BIT6_OR_GPIO2_BIT6 19 -#define PLIC_INT_GPIO0_BIT7_OR_GPIO2_BIT7 20 -#define PLIC_INT_GPIO0_BIT8_OR_GPIO2_BIT8 21 -#define PLIC_INT_GPIO0_BIT9_OR_GPIO2_BIT9 22 -#define PLIC_INT_GPIO0_BIT10_OR_GPIO2_BIT10 23 -#define PLIC_INT_GPIO0_BIT11_OR_GPIO2_BIT11 24 -#define PLIC_INT_GPIO0_BIT12_OR_GPIO2_BIT12 25 -#define PLIC_INT_GPIO0_BIT13_OR_GPIO2_BIT13 26 -#define PLIC_INT_GPIO1_BIT0_OR_GPIO2_BIT14 27 -#define PLIC_INT_GPIO1_BIT1_OR_GPIO2_BIT15 28 -#define PLIC_INT_GPIO1_BIT2_OR_GPIO2_BIT16 29 -#define PLIC_INT_GPIO1_BIT3_OR_GPIO2_BIT17 30 -#define PLIC_INT_GPIO1_BIT4_OR_GPIO2_BIT18 31 -#define PLIC_INT_GPIO1_BIT5_OR_GPIO2_BIT19 32 -#define PLIC_INT_GPIO1_BIT6_OR_GPIO2_BIT20 33 -#define PLIC_INT_GPIO1_BIT7_OR_GPIO2_BIT21 34 -#define PLIC_INT_GPIO1_BIT8_OR_GPIO2_BIT22 35 -#define PLIC_INT_GPIO1_BIT9_OR_GPIO2_BIT23 36 -#define PLIC_INT_GPIO1_BIT10_OR_GPIO2_BIT24 37 -#define PLIC_INT_GPIO1_BIT11_OR_GPIO2_BIT25 38 -#define PLIC_INT_GPIO1_BIT12_OR_GPIO2_BIT26 39 -#define PLIC_INT_GPIO1_BIT13_OR_GPIO2_BIT27 40 -#define PLIC_INT_GPIO1_BIT14_OR_GPIO2_BIT28 41 -#define PLIC_INT_GPIO1_BIT15_OR_GPIO2_BIT29 42 -#define PLIC_INT_GPIO1_BIT16_OR_GPIO2_BIT30 43 -#define PLIC_INT_GPIO1_BIT17_OR_GPIO2_BIT31 44 -#define PLIC_INT_GPIO1_BIT18 45 -#define PLIC_INT_GPIO1_BIT19 46 -#define PLIC_INT_GPIO1_BIT20 47 -#define PLIC_INT_GPIO1_BIT21 48 -#define PLIC_INT_GPIO1_BIT22 49 -#define PLIC_INT_GPIO1_BIT23 50 -#define PLIC_INT_GPIO0_NON_DIRECT 51 -#define PLIC_INT_GPIO1_NON_DIRECT 52 -#define PLIC_INT_GPIO2_NON_DIRECT 53 -#define PLIC_INT_SPI0 54 -#define PLIC_INT_SPI1 55 -#define PLIC_INT_CAN0 56 -#define PLIC_INT_CAN1 57 -#define PLIC_INT_I2C0_MAIN 58 -#define PLIC_INT_I2C0_ALERT 59 -#define PLIC_INT_I2C0_SUS 60 -#define PLIC_INT_I2C1_MAIN 61 -#define PLIC_INT_I2C1_ALERT 62 -#define PLIC_INT_I2C1_SUS 63 -#define PLIC_INT_MAC0_INT 64 -#define PLIC_INT_MAC0_QUEUE1 65 -#define PLIC_INT_MAC0_QUEUE2 66 -#define PLIC_INT_MAC0_QUEUE3 67 -#define PLIC_INT_MAC0_EMAC 68 -#define PLIC_INT_MAC0_MMSL 69 -#define PLIC_INT_MAC1_INT 70 -#define PLIC_INT_MAC1_QUEUE1 71 -#define PLIC_INT_MAC1_QUEUE2 72 -#define PLIC_INT_MAC1_QUEUE3 73 -#define PLIC_INT_MAC1_EMAC 74 -#define PLIC_INT_MAC1_MMSL 75 -#define PLIC_INT_DDRC_TRAIN 76 -#define PLIC_INT_SCB_INTERRUPT 77 -#define PLIC_INT_ECC_ERROR 78 -#define PLIC_INT_ECC_CORRECT 79 -#define PLIC_INT_RTC_WAKEUP 80 -#define PLIC_INT_RTC_MATCH 81 -#define PLIC_INT_TIMER1 82 -#define PLIC_INT_TIMER2 83 -#define PLIC_INT_ENVM 84 -#define PLIC_INT_QSPI 85 -#define PLIC_INT_USB_DMA 86 -#define PLIC_INT_USB_MC 87 -#define PLIC_INT_MMC_MAIN 88 -#define PLIC_INT_MMC_WAKEUP 89 -#define PLIC_INT_MMUART0 90 -#define PLIC_INT_MMUART1 91 -#define PLIC_INT_MMUART2 92 -#define PLIC_INT_MMUART3 93 -#define PLIC_INT_MMUART4 94 -#define PLIC_INT_G5C_DEVRST 95 -#define PLIC_INT_G5C_MESSAGE 96 -#define PLIC_INT_USOC_VC_INTERRUPT 97 -#define PLIC_INT_USOC_SMB_INTERRUPT 98 -#define PLIC_INT_E51_0_MAINTENACE 99 -#define PLIC_INT_WDOG0_MRVP 100 -#define PLIC_INT_WDOG1_MRVP 101 -#define PLIC_INT_WDOG2_MRVP 102 -#define PLIC_INT_WDOG3_MRVP 103 -#define PLIC_INT_WDOG4_MRVP 104 -#define PLIC_INT_WDOG0_TOUT 105 -#define PLIC_INT_WDOG1_TOUT 106 -#define PLIC_INT_WDOG2_TOUT 107 -#define PLIC_INT_WDOG3_TOUT 108 -#define PLIC_INT_WDOG4_TOUT 109 -#define PLIC_INT_G5C_MSS_SPI 110 -#define PLIC_INT_VOLT_TEMP_ALARM 111 -#define PLIC_INT_ATHENA_COMPLETE 112 -#define PLIC_INT_ATHENA_ALARM 113 -#define PLIC_INT_ATHENA_BUS_ERROR 114 -#define PLIC_INT_USOC_AXIC_US 115 -#define PLIC_INT_USOC_AXIC_DS 116 -#define PLIC_INT_SPARE 117 -#define PLIC_INT_FABRIC_F2H_0 118 -#define PLIC_INT_FABRIC_F2H_1 119 -#define PLIC_INT_FABRIC_F2H_2 120 -#define PLIC_INT_FABRIC_F2H_3 121 -#define PLIC_INT_FABRIC_F2H_4 122 -#define PLIC_INT_FABRIC_F2H_5 123 -#define PLIC_INT_FABRIC_F2H_6 124 -#define PLIC_INT_FABRIC_F2H_7 125 -#define PLIC_INT_FABRIC_F2H_8 126 -#define PLIC_INT_FABRIC_F2H_9 127 -#define PLIC_INT_FABRIC_F2H_10 128 -#define PLIC_INT_FABRIC_F2H_11 129 -#define PLIC_INT_FABRIC_F2H_12 130 -#define PLIC_INT_FABRIC_F2H_13 131 -#define PLIC_INT_FABRIC_F2H_14 132 -#define PLIC_INT_FABRIC_F2H_15 133 -#define PLIC_INT_FABRIC_F2H_16 134 -#define PLIC_INT_FABRIC_F2H_17 135 -#define PLIC_INT_FABRIC_F2H_18 136 -#define PLIC_INT_FABRIC_F2H_19 137 -#define PLIC_INT_FABRIC_F2H_20 138 -#define PLIC_INT_FABRIC_F2H_21 139 -#define PLIC_INT_FABRIC_F2H_22 140 -#define PLIC_INT_FABRIC_F2H_23 141 -#define PLIC_INT_FABRIC_F2H_24 142 -#define PLIC_INT_FABRIC_F2H_25 143 -#define PLIC_INT_FABRIC_F2H_26 144 -#define PLIC_INT_FABRIC_F2H_27 145 -#define PLIC_INT_FABRIC_F2H_28 146 -#define PLIC_INT_FABRIC_F2H_29 147 -#define PLIC_INT_FABRIC_F2H_30 148 -#define PLIC_INT_FABRIC_F2H_31 149 -#define PLIC_INT_FABRIC_F2H_32 150 -#define PLIC_INT_FABRIC_F2H_33 151 -#define PLIC_INT_FABRIC_F2H_34 152 -#define PLIC_INT_FABRIC_F2H_35 153 -#define PLIC_INT_FABRIC_F2H_36 154 -#define PLIC_INT_FABRIC_F2H_37 155 -#define PLIC_INT_FABRIC_F2H_38 156 -#define PLIC_INT_FABRIC_F2H_39 157 -#define PLIC_INT_FABRIC_F2H_40 158 -#define PLIC_INT_FABRIC_F2H_41 159 -#define PLIC_INT_FABRIC_F2H_42 160 -#define PLIC_INT_FABRIC_F2H_43 161 -#define PLIC_INT_FABRIC_F2H_44 162 -#define PLIC_INT_FABRIC_F2H_45 163 -#define PLIC_INT_FABRIC_F2H_46 164 -#define PLIC_INT_FABRIC_F2H_47 165 -#define PLIC_INT_FABRIC_F2H_48 166 -#define PLIC_INT_FABRIC_F2H_49 167 -#define PLIC_INT_FABRIC_F2H_50 168 -#define PLIC_INT_FABRIC_F2H_51 169 -#define PLIC_INT_FABRIC_F2H_52 170 -#define PLIC_INT_FABRIC_F2H_53 171 -#define PLIC_INT_FABRIC_F2H_54 172 -#define PLIC_INT_FABRIC_F2H_55 173 -#define PLIC_INT_FABRIC_F2H_56 174 -#define PLIC_INT_FABRIC_F2H_57 175 -#define PLIC_INT_FABRIC_F2H_58 176 -#define PLIC_INT_FABRIC_F2H_59 177 -#define PLIC_INT_FABRIC_F2H_60 178 -#define PLIC_INT_FABRIC_F2H_61 179 -#define PLIC_INT_FABRIC_F2H_62 180 -#define PLIC_INT_FABRIC_F2H_63 181 -#define PLIC_INT_BUS_ERROR_UNIT_HART_0 182 -#define PLIC_INT_BUS_ERROR_UNIT_HART_1 183 -#define PLIC_INT_BUS_ERROR_UNIT_HART_2 184 -#define PLIC_INT_BUS_ERROR_UNIT_HART_3 185 -#define PLIC_INT_BUS_ERROR_UNIT_HART_4 186 - -#endif /* _DT_BINDINGS_INTERRUPT_CONTROLLER_MICROCHIP_MPFS_PLIC_H */ diff --git a/include/dt-bindings/interrupt-controller/riscv-hart.h b/include/dt-bindings/interrupt-controller/riscv-hart.h deleted file mode 100644 index c4331b8521..0000000000 --- a/include/dt-bindings/interrupt-controller/riscv-hart.h +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ -/* Copyright (c) 2020-2021 Microchip Technology Inc */ - -#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_RISCV_HART_H -#define _DT_BINDINGS_INTERRUPT_CONTROLLER_RISCV_HART_H - -#define HART_INT_U_SOFT 0 -#define HART_INT_S_SOFT 1 -#define HART_INT_M_SOFT 3 -#define HART_INT_U_TIMER 4 -#define HART_INT_S_TIMER 5 -#define HART_INT_M_TIMER 7 -#define HART_INT_U_EXT 8 -#define HART_INT_S_EXT 9 -#define HART_INT_M_EXT 11 - -#endif /* _DT_BINDINGS_INTERRUPT_CONTROLLER_RISCV_HART_H */