From: Patrick Delaunay <patrick.delaunay@st.com>
Date: Mon, 25 May 2020 10:19:48 +0000 (+0200)
Subject: ARM: dts: stm32mp1: use OPP information for PLL1 settings in SPL
X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=4a87fea6de30b6e9c59a5abb6da1d0d84c984d15;p=u-boot.git

ARM: dts: stm32mp1: use OPP information for PLL1 settings in SPL

This patch allows to switch the CPU frequency to 800MHz on the
ST Microelectronics board (DK1/DK2 and EV1) or dh electronics SOM
using the STM32MP15x SOC and when it is supported by the HW
(for STM32MP15xD and STM32MP15xF).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
---

diff --git a/arch/arm/dts/stm32mp15-u-boot.dtsi b/arch/arm/dts/stm32mp15-u-boot.dtsi
index a0d971ad88..66be7df9ae 100644
--- a/arch/arm/dts/stm32mp15-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15-u-boot.dtsi
@@ -88,6 +88,16 @@
 	u-boot,dm-pre-reloc;
 };
 
+&cpu0_opp_table {
+	u-boot,dm-spl;
+	opp-650000000 {
+		u-boot,dm-spl;
+	};
+	opp-800000000 {
+		u-boot,dm-spl;
+	};
+};
+
 &gpioa {
 	u-boot,dm-pre-reloc;
 };
diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
index e13dade463..7b8c1c1cc7 100644
--- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
@@ -133,15 +133,6 @@
 		CLK_LPTIM45_LSE
 	>;
 
-	/* VCO = 1300.0 MHz => P = 650 (CPU) */
-	pll1: st,pll@0 {
-		compatible = "st,stm32mp1-pll";
-		reg = <0>;
-		cfg = < 2 80 0 0 0 PQR(1,0,0) >;
-		frac = < 0x800 >;
-		u-boot,dm-pre-reloc;
-	};
-
 	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
 	pll2: st,pll@1 {
 		compatible = "st,stm32mp1-pll";
diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
index b16dc28d47..ef3e7f45a3 100644
--- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
@@ -129,15 +129,6 @@
 		CLK_LPTIM45_LSE
 	>;
 
-	/* VCO = 1300.0 MHz => P = 650 (CPU) */
-	pll1: st,pll@0 {
-		compatible = "st,stm32mp1-pll";
-		reg = <0>;
-		cfg = < 2 80 0 0 0 PQR(1,0,0) >;
-		frac = < 0x800 >;
-		u-boot,dm-pre-reloc;
-	};
-
 	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
 	pll2: st,pll@1 {
 		compatible = "st,stm32mp1-pll";
diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
index df63ad4a24..69c5af4241 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
@@ -235,15 +235,6 @@
 		CLK_LPTIM45_LSE
 	>;
 
-	/* VCO = 1300.0 MHz => P = 650 (CPU) */
-	pll1: st,pll@0 {
-		compatible = "st,stm32mp1-pll";
-		reg = <0>;
-		cfg = < 2 80 0 0 0 PQR(1,0,0) >;
-		frac = < 0x800 >;
-		u-boot,dm-pre-reloc;
-	};
-
 	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
 	pll2: st,pll@1 {
 		compatible = "st,stm32mp1-pll";
diff --git a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi
index bd4c2adc35..7529068c51 100644
--- a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi
@@ -114,15 +114,6 @@
 		CLK_LPTIM45_LSE
 	>;
 
-	/* VCO = 1300.0 MHz => P = 650 (CPU) */
-	pll1: st,pll@0 {
-		compatible = "st,stm32mp1-pll";
-		reg = <0>;
-		cfg = < 2 80 0 0 0 PQR(1,0,0) >;
-		frac = < 0x800 >;
-		u-boot,dm-pre-reloc;
-	};
-
 	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
 	pll2: st,pll@1 {
 		compatible = "st,stm32mp1-pll";