From: Chen-Yu Tsai Date: Fri, 22 Jul 2016 08:12:59 +0000 (+0800) Subject: sunxi: gpio: Add .xlate function for gpio phandle resolution X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=4694dc56e974eac94d6a4aa07c3d4071bf64e28c;p=u-boot.git sunxi: gpio: Add .xlate function for gpio phandle resolution sunxi uses a 2 cell phandle for gpio bindings. Also there are no seperate nodes for each pin bank. Add a custom .xlate function to map gpio phandles to the correct pin bank device. This fixes gpio_request_by_name usage. Fixes: 7aa974858422 ("dm: sunxi: Modify the GPIO driver to support driver model") Signed-off-by: Chen-Yu Tsai Signed-off-by: Hans de Goede --- diff --git a/drivers/gpio/sunxi_gpio.c b/drivers/gpio/sunxi_gpio.c index 94abbeb39a..e8accaa333 100644 --- a/drivers/gpio/sunxi_gpio.c +++ b/drivers/gpio/sunxi_gpio.c @@ -19,6 +19,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -215,12 +216,27 @@ static int sunxi_gpio_get_function(struct udevice *dev, unsigned offset) return GPIOF_FUNC; } +static int sunxi_gpio_xlate(struct udevice *dev, struct gpio_desc *desc, + struct fdtdec_phandle_args *args) +{ + int ret; + + ret = device_get_child(dev, args->args[0], &desc->dev); + if (ret) + return ret; + desc->offset = args->args[1]; + desc->flags = args->args[2] & GPIO_ACTIVE_LOW ? GPIOD_ACTIVE_LOW : 0; + + return 0; +} + static const struct dm_gpio_ops gpio_sunxi_ops = { .direction_input = sunxi_gpio_direction_input, .direction_output = sunxi_gpio_direction_output, .get_value = sunxi_gpio_get_value, .set_value = sunxi_gpio_set_value, .get_function = sunxi_gpio_get_function, + .xlate = sunxi_gpio_xlate, }; /**