From: Konstantin Porotchkin Date: Tue, 28 Mar 2017 15:36:34 +0000 (+0300) Subject: fix: mvebu: pcie_dw: Allow probing empty PCIe slots X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=3f75e0ce7badc7db03885f8b925a5f47cad29cac;p=u-boot.git fix: mvebu: pcie_dw: Allow probing empty PCIe slots This patch allows probing all PCIe nodes defined in DTS even if there no device connected to such node (no link). Without this fix the driver returns -ENODEV when the PCIe link is down. As result the pci_init function stops scanning bus on first empty PCIe slot and all devices located in higher numbered buses are not discovered. Signed-off-by: Konstantin Porotchkin Cc: Stefan Roese Cc: Igal Liberman Cc: Nadav Haklai Reviewed-by: Stefan Roese --- diff --git a/drivers/pci/pcie_dw_mvebu.c b/drivers/pci/pcie_dw_mvebu.c index d4776a9c81..05a06604e6 100644 --- a/drivers/pci/pcie_dw_mvebu.c +++ b/drivers/pci/pcie_dw_mvebu.c @@ -487,13 +487,13 @@ static int pcie_dw_mvebu_probe(struct udevice *dev) /* Don't register host if link is down */ if (!pcie_dw_mvebu_pcie_link_up(pcie->ctrl_base, LINK_SPEED_GEN_3)) { printf("PCIE-%d: Link down\n", dev->seq); - return -ENODEV; + } else { + printf("PCIE-%d: Link up (Gen%d-x%d, Bus%d)\n", dev->seq, + pcie_dw_get_link_speed(pcie->ctrl_base), + pcie_dw_get_link_width(pcie->ctrl_base), + hose->first_busno); } - printf("PCIE-%d: Link up (Gen%d-x%d, Bus%d)\n", dev->seq, - pcie_dw_get_link_speed(pcie->ctrl_base), - pcie_dw_get_link_width(pcie->ctrl_base), hose->first_busno); - pcie_dw_regions_setup(pcie); /* Set the CLASS_REV of RC CFG header to PCI_CLASS_BRIDGE_PCI */