From: Stefan Roese <sr@denx.de>
Date: Thu, 3 Dec 2015 11:39:45 +0000 (+0100)
Subject: arm: mvebu: Enable L2 cache on Armada XP
X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=3e5ce7ceeb940926518378ff31913b263d41c354;p=u-boot.git

arm: mvebu: Enable L2 cache on Armada XP

Until now, the L2 cache was never enabled again in U-Boot. To get
even better performance (bootup time), lets enable the L2 cache
in U-Boot. This code was taken from the Linux kernel.

A performance gain was measured on the DB-MV784MP-GP board by testing
with tftpboot and sata commands.

This patch also cleans up the L2 cache related code. And makes sure that
the L2 cache is only disabled once.

Please note that A38x still runs with L2 cache disabled. And needs
to be enabled for this SoC in a separate patch if needed or desired.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
---

diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c
index 751dabc5a6..74087e2903 100644
--- a/arch/arm/mach-mvebu/cpu.c
+++ b/arch/arm/mach-mvebu/cpu.c
@@ -389,20 +389,36 @@ void scsi_init(void)
 }
 #endif
 
-#ifndef CONFIG_SYS_DCACHE_OFF
 void enable_caches(void)
 {
-	struct pl310_regs *const pl310 =
-		(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
-
-	/* First disable L2 cache - may still be enable from BootROM */
-	if (mvebu_soc_family() == MVEBU_SOC_A38X)
-		clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
-
 	/* Avoid problem with e.g. neta ethernet driver */
 	invalidate_dcache_all();
 
 	/* Enable D-cache. I-cache is already enabled in start.S */
 	dcache_enable();
 }
-#endif
+
+void v7_outer_cache_enable(void)
+{
+	struct pl310_regs *const pl310 =
+		(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
+
+	/* The L2 cache is already disabled at this point */
+
+	if (mvebu_soc_family() == MVEBU_SOC_AXP) {
+		u32 u;
+
+		/*
+		 * For Aurora cache in no outer mode, enable via the CP15
+		 * coprocessor broadcasting of cache commands to L2.
+		 */
+		asm volatile("mrc p15, 1, %0, c15, c2, 0" : "=r" (u));
+		u |= BIT(8);		/* Set the FW bit */
+		asm volatile("mcr p15, 1, %0, c15, c2, 0" : : "r" (u));
+
+		isb();
+
+		/* Enable the L2 cache */
+		setbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
+	}
+}