From: Nishanth Menon <nm@ti.com>
Date: Thu, 27 Jul 2023 18:58:54 +0000 (-0500)
Subject: doc: board: ti: am62x_sk: Convert switch settings to list tables
X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=36ed8fbf4089e4dd8c24d002171aec88792922b4;p=u-boot.git

doc: board: ti: am62x_sk: Convert switch settings to list tables

Use list tables to map up the dip switch settings

Signed-off-by: Nishanth Menon <nm@ti.com>
---

diff --git a/doc/board/ti/am62x_sk.rst b/doc/board/ti/am62x_sk.rst
index 16a4ab4dcf..906d7ceb31 100644
--- a/doc/board/ti/am62x_sk.rst
+++ b/doc/board/ti/am62x_sk.rst
@@ -213,16 +213,32 @@ The following table shows some common boot modes used on AM62 platform. More
 details can be found in the Technical Reference Manual:
 https://www.ti.com/lit/pdf/spruiv7 under the `Boot Mode Pins` section.
 
-*Boot Modes*
-
-============ ============= =============
-Switch Label SW2: 12345678 SW3: 12345678
-============ ============= =============
-SD           01000000      11000010
-OSPI         00000000      11001110
-EMMC         00000000      11010010
-UART         00000000      11011100
-USB DFU      00000000      11001010
-============ ============= =============
+.. list-table:: Boot Modes
+   :widths: 16 16 16
+   :header-rows: 1
+
+   * - Switch Label
+     - SW2: 12345678
+     - SW3: 12345678
+
+   * - SD
+     - 01000000
+     - 11000010
+
+   * - OSPI
+     - 00000000
+     - 11001110
+
+   * - EMMC
+     - 00000000
+     - 11010010
+
+   * - UART
+     - 00000000
+     - 11011100
+
+   * - USB DFU
+     - 00000000
+     - 11001010
 
 For SW2 and SW1, the switch state in the "ON" position = 1.