From: Pali Rohár Date: Mon, 18 Jan 2021 11:09:33 +0000 (+0100) Subject: arm64: a37xx: pci: Fix printing debug messages X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=279b5736570b9ae5da3d589ff8df5dcc3d19296b;p=u-boot.git arm64: a37xx: pci: Fix printing debug messages Value pcie->dev in function pcie_advk_probe() is not initialized yet so use dev as argument for dev_dbg()/dev_warn(). Function pcie_advk_wait_pio() itself prints error message on failure so do not print duplicate error message in caller. Signed-off-by: Pali Rohár Reviewed-by: Stefan Roese --- diff --git a/drivers/pci/pci-aardvark.c b/drivers/pci/pci-aardvark.c index 1534efb88e..8713b88461 100644 --- a/drivers/pci/pci-aardvark.c +++ b/drivers/pci/pci-aardvark.c @@ -448,7 +448,6 @@ static int pcie_advk_write_config(struct udevice *bus, pci_dev_t bdf, advk_writel(pcie, 1, PIO_START); if (!pcie_advk_wait_pio(pcie)) { - dev_dbg(pcie->dev, "- wait pio timeout\n"); return -EINVAL; } @@ -630,12 +629,12 @@ static int pcie_advk_probe(struct udevice *dev) * clock should be gated as well. */ if (dm_gpio_is_valid(&pcie->reset_gpio)) { - dev_dbg(pcie->dev, "Toggle PCIE Reset GPIO ...\n"); + dev_dbg(dev, "Toggle PCIE Reset GPIO ...\n"); dm_gpio_set_value(&pcie->reset_gpio, 1); mdelay(200); dm_gpio_set_value(&pcie->reset_gpio, 0); } else { - dev_warn(pcie->dev, "PCIE Reset on GPIO support is missing\n"); + dev_warn(dev, "PCIE Reset on GPIO support is missing\n"); } pcie->first_busno = dev_seq(dev);