From: Tom Rini Date: Sat, 11 Jun 2022 02:59:33 +0000 (-0400) Subject: arm: samsung: Migrate a number of symbols to Kconfig X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=24ec3dea4bf07e8928e82d509ce5bc742fdbde9b;p=u-boot.git arm: samsung: Migrate a number of symbols to Kconfig - In a number of cases, use CONFIG_ARCH_EXYNOS[45] rather than CONFIG_EXYNOS[45] - In other cases, test for CONFIG_ARCH_EXYNOS or CONFIG_ARCH_S5PC1XX - Migrate specific SoC CONFIG values to Kconfig - Use CONFIG_TARGET_x rather than CONFIG_x - Migrate other CONFIG_EXYNOS_x symbols to Kconfig - Reference CONFIG_EXYNOS_RELOCATE_CODE_BASE directly as EXYNOS_RELOCATE_CODE_BASE - Rename CONFIG_S5P_PA_SYSRAM to CONFIG_SMP_PEN_ADDR to match the rest of U-Boot usage. Cc: Minkyu Kang Signed-off-by: Tom Rini --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e682d65e51..ddef3d03ab 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -609,6 +609,9 @@ config ARM64_SUPPORT_AARCH32 help This ARM64 system supports AArch32 execution state. +config S5P + def_bool y if ARCH_EXYNOS || ARCH_S5PC1XX + choice prompt "Target select" default TARGET_HIKEY diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index a9f4cccf8d..87b210dbb0 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -5,9 +5,9 @@ dtb-$(CONFIG_TARGET_TAURUS) += at91sam9g20-taurus.dtb dtb-$(CONFIG_TARGET_CORVUS) += at91sam9g45-corvus.dtb dtb-$(CONFIG_TARGET_GURNARD) += at91sam9g45-gurnard.dtb -dtb-$(CONFIG_S5PC100) += s5pc1xx-smdkc100.dtb -dtb-$(CONFIG_S5PC110) += s5pc1xx-goni.dtb -dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \ +dtb-$(CONFIG_TARGET_SMDKC100) += s5pc1xx-smdkc100.dtb +dtb-$(CONFIG_TARGET_S5P_GONI) += s5pc1xx-goni.dtb +dtb-$(CONFIG_ARCH_EXYNOS4) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-universal_c210.dtb \ exynos4210-trats.dtb \ @@ -19,7 +19,7 @@ dtb-$(CONFIG_TARGET_HIKEY960) += hi3660-hikey960.dtb dtb-$(CONFIG_TARGET_POPLAR) += hi3798cv200-poplar.dtb -dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \ +dtb-$(CONFIG_ARCH_EXYNOS5) += exynos5250-arndale.dtb \ exynos5250-snow.dtb \ exynos5250-spring.dtb \ exynos5250-smdk5250.dtb \ diff --git a/arch/arm/include/asm/spl.h b/arch/arm/include/asm/spl.h index b5790bd0bc..0ece4b0906 100644 --- a/arch/arm/include/asm/spl.h +++ b/arch/arm/include/asm/spl.h @@ -6,9 +6,8 @@ #ifndef _ASM_SPL_H_ #define _ASM_SPL_H_ -#if defined(CONFIG_ARCH_OMAP2PLUS) \ - || defined(CONFIG_EXYNOS4) || defined(CONFIG_EXYNOS5) \ - || defined(CONFIG_EXYNOS4210) || defined(CONFIG_ARCH_K3) +#if defined(CONFIG_ARCH_EXYNOS4) || defined(CONFIG_ARCH_EXYNOS5) || \ + defined(CONFIG_ARCH_K3) || defined(CONFIG_ARCH_OMAP2PLUS) /* Platform-specific defines */ #include diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 77fb9d1775..8410290856 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -54,11 +54,15 @@ endchoice if ARCH_EXYNOS4 +config EXYNOS4210 + bool + choice prompt "EXYNOS4 board select" config TARGET_SMDKV310 bool "Exynos4210 SMDKV310 board" + select EXYNOS4210 select OF_CONTROL select SUPPORT_SPL @@ -70,6 +74,7 @@ config TARGET_S5PC210_UNIVERSAL config TARGET_ORIGEN bool "Exynos4412 Origen board" + select EXYNOS4210 select SUPPORT_SPL config TARGET_TRATS2 @@ -83,6 +88,15 @@ endif if ARCH_EXYNOS5 +config EXYNOS5250 + bool + +config EXYNOS5420 + bool + +config EXYNOS5_DT + bool + config SPL_GPIO default y @@ -97,6 +111,8 @@ choice config TARGET_ODROID_XU3 bool "Exynos5422 Odroid board" + select EXYNOS5_DT + select EXYNOS5420 select OF_CONTROL config TARGET_ARNDALE @@ -105,36 +121,49 @@ config TARGET_ARNDALE select ARM_ERRATA_774769 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT + select EXYNOS5250 select OF_CONTROL select SUPPORT_SPL config TARGET_SMDK5250 bool "SMDK5250 board" + select EXYNOS5_DT + select EXYNOS5250 select OF_CONTROL select SUPPORT_SPL config TARGET_SNOW bool "Snow board" + select EXYNOS5_DT + select EXYNOS5250 select OF_CONTROL select SUPPORT_SPL config TARGET_SPRING bool "Spring board" + select EXYNOS5_DT + select EXYNOS5250 select OF_CONTROL select SUPPORT_SPL config TARGET_SMDK5420 bool "SMDK5420 board" + select EXYNOS5_DT + select EXYNOS5420 select OF_CONTROL select SUPPORT_SPL config TARGET_PEACH_PI bool "Peach Pi board" + select EXYNOS5_DT + select EXYNOS5420 select OF_CONTROL select SUPPORT_SPL config TARGET_PEACH_PIT bool "Peach Pit board" + select EXYNOS5_DT + select EXYNOS5420 select OF_CONTROL select SUPPORT_SPL @@ -189,6 +218,16 @@ endif config SYS_SOC default "exynos" +config EXYNOS_ACE_SHA + bool "Advanced Crypto Engine SHA support" + depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5) && (LIB_HW_RAND || SHA_HW_ACCEL) + default y if ARCH_EXYNOS5 + +config EXYNOS_TMU + bool "Exynos5 thermal management unit support" + depends on ARCH_EXYNOS5 + default y + source "board/samsung/smdkv310/Kconfig" source "board/samsung/trats/Kconfig" source "board/samsung/universal_c210/Kconfig" diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index e895c13157..dd097cf541 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -10,8 +10,8 @@ obj-$(CONFIG_ARM64) += mmu-arm64.o obj-$(CONFIG_EXYNOS5420) += sec_boot.o ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_EXYNOS5) += clock_init_exynos5.o -obj-$(CONFIG_EXYNOS5) += dmc_common.o dmc_init_ddr3.o +obj-$(CONFIG_ARCH_EXYNOS5) += clock_init_exynos5.o +obj-$(CONFIG_ARCH_EXYNOS5) += dmc_common.o dmc_init_ddr3.o obj-$(CONFIG_EXYNOS4210)+= dmc_init_exynos4.o clock_init_exynos4.o obj-y += spl_boot.o tzpc.o obj-y += lowlevel_init.o diff --git a/arch/arm/mach-exynos/dmc_init_exynos4.c b/arch/arm/mach-exynos/dmc_init_exynos4.c index ecddc72684..58a3c82f68 100644 --- a/arch/arm/mach-exynos/dmc_init_exynos4.c +++ b/arch/arm/mach-exynos/dmc_init_exynos4.c @@ -175,7 +175,7 @@ void mem_ctrl_init(int reset) * 0: full_sync */ writel(1, ASYNC_CONFIG); -#ifdef CONFIG_ORIGEN +#ifdef CONFIG_TARGET_ORIGEN /* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */ writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE + APB_SFR_INTERLEAVE_CONF_OFFSET); diff --git a/arch/arm/mach-exynos/exynos4_setup.h b/arch/arm/mach-exynos/exynos4_setup.h index a08d64a8e2..fbb45eb897 100644 --- a/arch/arm/mach-exynos/exynos4_setup.h +++ b/arch/arm/mach-exynos/exynos4_setup.h @@ -420,7 +420,7 @@ struct mem_timings { #define ABP_SFR_SLV1_SINGLE_ADDRMAP_START_OFFSET 0x828 #define ABP_SFR_SLV1_SINGLE_ADDRMAP_END_OFFSET 0x830 -#ifdef CONFIG_ORIGEN +#ifdef CONFIG_TARGET_ORIGEN /* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */ #define APB_SFR_INTERLEAVE_CONF_VAL 0x20001507 #define APB_SFR_ARBRITATION_CONF_VAL 0x00000001 @@ -542,7 +542,7 @@ struct mem_timings { #define CONTROL2_VAL 0x00000000 -#ifdef CONFIG_ORIGEN +#ifdef CONFIG_TARGET_ORIGEN #define TIMINGREF_VAL 0x000000BB #define TIMINGROW_VAL 0x4046654f #define TIMINGDATA_VAL 0x46400506 diff --git a/arch/arm/mach-exynos/lowlevel_init.c b/arch/arm/mach-exynos/lowlevel_init.c index 2645a8ff49..1ff5fcac1b 100644 --- a/arch/arm/mach-exynos/lowlevel_init.c +++ b/arch/arm/mach-exynos/lowlevel_init.c @@ -49,6 +49,10 @@ enum { }; #ifdef CONFIG_EXYNOS5420 + +/* Address for relocating helper code (Last 4 KB of IRAM) */ +#define EXYNOS_RELOCATE_CODE_BASE (CONFIG_IRAM_TOP - 0x1000) + /* * Power up secondary CPUs. */ @@ -56,7 +60,7 @@ static void secondary_cpu_start(void) { v7_enable_smp(EXYNOS5420_INFORM_BASE); svc32_mode_en(); - branch_bx(CONFIG_EXYNOS_RELOCATE_CODE_BASE); + branch_bx(EXYNOS_RELOCATE_CODE_BASE); } /* @@ -153,7 +157,7 @@ static void power_down_core(void) static void secondary_cores_configure(void) { /* Clear secondary boot iRAM base */ - writel(0x0, (CONFIG_EXYNOS_RELOCATE_CODE_BASE + 0x1C)); + writel(0x0, (EXYNOS_RELOCATE_CODE_BASE + 0x1C)); /* set lowpower flag and address */ writel(CPU_RST_FLAG_VAL, CONFIG_LOWPOWER_FLAG); diff --git a/arch/arm/mach-exynos/sec_boot.S b/arch/arm/mach-exynos/sec_boot.S index 59d05e6c01..40c07209e4 100644 --- a/arch/arm/mach-exynos/sec_boot.S +++ b/arch/arm/mach-exynos/sec_boot.S @@ -21,7 +21,7 @@ relocate_wait_code: .ltorg /* * Secondary core waits here until Primary wake it up. - * Below code is copied to CONFIG_EXYNOS_RELOCATE_CODE_BASE. + * Below code is copied to (CONFIG_IRAM_TOP - 0x1000) * This is a workaround code which is supposed to act as a * substitute/supplement to the iROM code. * diff --git a/board/samsung/arndale/arndale.c b/board/samsung/arndale/arndale.c index b43242fd3f..5320c1f2e0 100644 --- a/board/samsung/arndale/arndale.c +++ b/board/samsung/arndale/arndale.c @@ -112,10 +112,10 @@ int checkboard(void) } #endif -#ifdef CONFIG_S5P_PA_SYSRAM +#ifdef CONFIG_SMP_PEN_ADDR void smp_set_core_boot_addr(unsigned long addr, int corenr) { - writel(addr, CONFIG_S5P_PA_SYSRAM); + writel(addr, CONFIG_SMP_PEN_ADDR); /* make sure this write is really executed */ __asm__ volatile ("dsb\n"); diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig index 7acdca9339..929a52140d 100644 --- a/configs/odroid-xu3_defconfig +++ b/configs/odroid-xu3_defconfig @@ -6,6 +6,7 @@ CONFIG_SYS_TEXT_BASE=0x43E00000 CONFIG_SYS_MALLOC_LEN=0x5004000 CONFIG_SYS_MALLOC_F_LEN=0x400 CONFIG_ARCH_EXYNOS5=y +# CONFIG_EXYNOS_TMU is not set CONFIG_NR_DRAM_BANKS=8 CONFIG_ENV_SIZE=0x4000 CONFIG_ENV_OFFSET=0x310000 diff --git a/configs/odroid_defconfig b/configs/odroid_defconfig index d442aca788..8beb6a006e 100644 --- a/configs/odroid_defconfig +++ b/configs/odroid_defconfig @@ -8,6 +8,7 @@ CONFIG_SYS_MALLOC_LEN=0x5004000 CONFIG_SYS_MALLOC_F_LEN=0x400 CONFIG_ARCH_EXYNOS4=y CONFIG_TARGET_ODROID=y +CONFIG_EXYNOS_ACE_SHA=y CONFIG_NR_DRAM_BANKS=8 CONFIG_ENV_SIZE=0x4000 CONFIG_ENV_OFFSET=0x140000 diff --git a/configs/trats2_defconfig b/configs/trats2_defconfig index 00a663fcf2..5c47a22d1e 100644 --- a/configs/trats2_defconfig +++ b/configs/trats2_defconfig @@ -8,6 +8,7 @@ CONFIG_SYS_MALLOC_LEN=0x5001000 CONFIG_SYS_MALLOC_F_LEN=0x400 CONFIG_ARCH_EXYNOS4=y CONFIG_TARGET_TRATS2=y +CONFIG_EXYNOS_ACE_SHA=y CONFIG_ENV_SIZE=0x1000 CONFIG_ENV_OFFSET=0x7000 CONFIG_DEFAULT_DEVICE_TREE="exynos4412-trats2" diff --git a/configs/trats_defconfig b/configs/trats_defconfig index d5f0866606..008a8ff4b3 100644 --- a/configs/trats_defconfig +++ b/configs/trats_defconfig @@ -8,6 +8,7 @@ CONFIG_SYS_MALLOC_LEN=0x5001000 CONFIG_SYS_MALLOC_F_LEN=0x400 CONFIG_ARCH_EXYNOS4=y CONFIG_TARGET_TRATS=y +CONFIG_EXYNOS_ACE_SHA=y CONFIG_ENV_SIZE=0x1000 CONFIG_ENV_OFFSET=0x7000 CONFIG_DEFAULT_DEVICE_TREE="exynos4210-trats" diff --git a/drivers/i2c/exynos_hs_i2c.c b/drivers/i2c/exynos_hs_i2c.c index 39bcacc17a..a7349e06cf 100644 --- a/drivers/i2c/exynos_hs_i2c.c +++ b/drivers/i2c/exynos_hs_i2c.c @@ -147,7 +147,7 @@ static int hsi2c_get_clk_details(struct s3c24x0_i2c_bus *i2c_bus) unsigned int i = 0, utemp0 = 0, utemp1 = 0; unsigned int t_ftl_cycle; -#if (defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5) +#if defined(CONFIG_ARCH_EXYNOS4) || defined(CONFIG_ARCH_EXYNOS5) clkin = get_i2c_clk(); #else clkin = get_PCLK(); diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c index aaccb3aa22..505e20bc61 100644 --- a/drivers/i2c/s3c24x0_i2c.c +++ b/drivers/i2c/s3c24x0_i2c.c @@ -8,7 +8,7 @@ #include #include #include -#if (defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5) +#if defined(CONFIG_ARCH_EXYNOS4) || defined(CONFIG_ARCH_EXYNOS5) #include #include #include @@ -53,7 +53,7 @@ static void read_write_byte(struct s3c24x0_i2c *i2c) static void i2c_ch_init(struct s3c24x0_i2c *i2c, int speed, int slaveadd) { ulong freq, pres = 16, div; -#if (defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5) +#if defined(CONFIG_ARCH_EXYNOS4) || defined(CONFIG_ARCH_EXYNOS5) freq = get_i2c_clk(); #else freq = get_PCLK(); diff --git a/include/configs/arndale.h b/include/configs/arndale.h index 5ebba0cda2..7a244769e3 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -14,13 +14,9 @@ #include "exynos5250-common.h" #include -/* MMC SPL */ -#define CONFIG_EXYNOS_SPL - /* Miscellaneous configurable options */ -#define CONFIG_S5P_PA_SYSRAM 0x02020000 -#define CONFIG_SMP_PEN_ADDR CONFIG_S5P_PA_SYSRAM +#define CONFIG_SMP_PEN_ADDR 0x02020000 /* The PERIPHBASE in the CBAR register is wrong on the Arndale, so override it */ #define CONFIG_ARM_GIC_BASE_ADDRESS 0x10480000 diff --git a/include/configs/espresso7420.h b/include/configs/espresso7420.h index 660d1a0804..2f067a4424 100644 --- a/include/configs/espresso7420.h +++ b/include/configs/espresso7420.h @@ -10,8 +10,6 @@ #include -#define CONFIG_ESPRESSO7420 - #define CONFIG_SYS_SDRAM_BASE 0x40000000 /* DRAM Memory Banks */ diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h index cbcef261f4..79860212f4 100644 --- a/include/configs/exynos-common.h +++ b/include/configs/exynos-common.h @@ -8,10 +8,6 @@ #ifndef __EXYNOS_COMMON_H #define __EXYNOS_COMMON_H -/* High Level Configuration Options */ -#define CONFIG_SAMSUNG /* in a SAMSUNG core */ -#define CONFIG_S5P /* S5P Family */ - #include /* get chip and board defs */ #include #include diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h index 4202c62612..625a2d8dc1 100644 --- a/include/configs/exynos4-common.h +++ b/include/configs/exynos4-common.h @@ -8,8 +8,6 @@ #ifndef __CONFIG_EXYNOS4_COMMON_H #define __CONFIG_EXYNOS4_COMMON_H -#define CONFIG_EXYNOS4 /* Exynos4 Family */ - #include "exynos-common.h" /* SD/MMC configuration */ diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index 7ab821d08c..44f5cb1e83 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -8,15 +8,8 @@ #ifndef __CONFIG_EXYNOS5_COMMON_H #define __CONFIG_EXYNOS5_COMMON_H -#define CONFIG_EXYNOS5 /* Exynos5 Family */ - #include "exynos-common.h" -#define CONFIG_EXYNOS_SPL - -/* Enable ACE acceleration for SHA1 and SHA256 */ -#define CONFIG_EXYNOS_ACE_SHA - /* Power Down Modes */ #define S5P_CHECK_SLEEP 0x00000BAD #define S5P_CHECK_DIDLE 0xBAD00000 @@ -31,9 +24,6 @@ /* select serial console configuration */ #define EXYNOS5_DEFAULT_UART_OFFSET 0x010000 -/* Thermal Management Unit */ -#define CONFIG_EXYNOS_TMU - /* MMC SPL */ #define COPY_BL2_FNPTR_ADDR 0x02020030 diff --git a/include/configs/exynos5-dt-common.h b/include/configs/exynos5-dt-common.h index bcbdfa7ae3..38f6940a3d 100644 --- a/include/configs/exynos5-dt-common.h +++ b/include/configs/exynos5-dt-common.h @@ -15,8 +15,6 @@ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" -#define CONFIG_EXYNOS5_DT - #define CONFIG_SYS_SPI_BASE 0x12D30000 #define FLASH_SIZE (4 << 20) #define CONFIG_SPI_BOOTING diff --git a/include/configs/exynos5250-common.h b/include/configs/exynos5250-common.h index 82cb8aff7b..e6f6dbe6bf 100644 --- a/include/configs/exynos5250-common.h +++ b/include/configs/exynos5250-common.h @@ -9,8 +9,6 @@ #ifndef __CONFIG_5250_H #define __CONFIG_5250_H -#define CONFIG_EXYNOS5250 - #define CONFIG_SYS_SDRAM_BASE 0x40000000 /* USB */ diff --git a/include/configs/exynos5420-common.h b/include/configs/exynos5420-common.h index 5e1aba7692..cfff8bb27a 100644 --- a/include/configs/exynos5420-common.h +++ b/include/configs/exynos5420-common.h @@ -8,19 +8,12 @@ #ifndef __CONFIG_EXYNOS5420_H #define __CONFIG_EXYNOS5420_H -#define CONFIG_EXYNOS5420 - -#define CONFIG_EXYNOS5_DT - #define CONFIG_VAR_SIZE_SPL #define CONFIG_IRAM_TOP 0x02074000 #define CONFIG_PHY_IRAM_BASE 0x02020000 -/* Address for relocating helper code (Last 4 KB of IRAM) */ -#define CONFIG_EXYNOS_RELOCATE_CODE_BASE (CONFIG_IRAM_TOP - 0x1000) - /* * Low Power settings */ diff --git a/include/configs/exynos7420-common.h b/include/configs/exynos7420-common.h index e8aed56710..a8bef860c2 100644 --- a/include/configs/exynos7420-common.h +++ b/include/configs/exynos7420-common.h @@ -8,10 +8,6 @@ #ifndef __CONFIG_EXYNOS7420_COMMON_H #define __CONFIG_EXYNOS7420_COMMON_H -/* High Level Configuration Options */ -#define CONFIG_SAMSUNG /* in a SAMSUNG core */ -#define CONFIG_S5P - #include /* get chip and board defs */ #include diff --git a/include/configs/exynos78x0-common.h b/include/configs/exynos78x0-common.h index 4a2e56b635..6b1de18bc1 100644 --- a/include/configs/exynos78x0-common.h +++ b/include/configs/exynos78x0-common.h @@ -11,10 +11,6 @@ #ifndef __CONFIG_EXYNOS78x0_COMMON_H #define __CONFIG_EXYNOS78x0_COMMON_H -/* High Level Configuration Options */ -#define CONFIG_SAMSUNG /* in a SAMSUNG core */ -#define CONFIG_S5P - #include /* get chip and board defs */ #include diff --git a/include/configs/odroid.h b/include/configs/odroid.h index dec658dd13..d4cc88206b 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -146,9 +146,6 @@ /* GPT */ -/* Security subsystem - enable hw_rand() */ -#define CONFIG_EXYNOS_ACE_SHA - /* USB */ #define CONFIG_USB_EHCI_EXYNOS diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index ed3cf212ac..35e7d7d265 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -31,9 +31,6 @@ #define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 -/* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */ -#undef CONFIG_EXYNOS_TMU - #define CONFIG_DFU_ALT_SYSTEM \ "uImage fat 0 1;" \ "zImage fat 0 1;" \ diff --git a/include/configs/origen.h b/include/configs/origen.h index 4d296b7a03..36aaa7c14f 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -10,10 +10,6 @@ #include -/* High Level Configuration Options */ -#define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */ -#define CONFIG_ORIGEN 1 /* working with ORIGEN*/ - /* ORIGEN has 4 bank of DRAM */ #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index d27116ad11..8b7e2e5dc9 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -10,11 +10,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* High Level Configuration Options */ -#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ -#define CONFIG_S5P 1 /* which is in a S5P Family */ -#define CONFIG_S5PC110 1 /* which is in a S5PC110 */ - #include #include /* get chip and board defs */ diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 2f04b077ad..9a9f3fedff 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -11,14 +11,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ -#define CONFIG_S5P 1 /* which is in a S5P Family */ -#define CONFIG_S5PC100 1 /* which is in a S5PC100 */ - #include /* get chip and board defs */ /* input clock of PLL: SMDKC100 has 12MHz input clock */ diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index 1367b7d060..bb0f547303 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -13,8 +13,6 @@ #undef CONFIG_USB_GADGET_DWC2_OTG_PHY /* High Level Configuration Options */ -#define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */ - #define CONFIG_SYS_SDRAM_BASE 0x40000000 /* Handling Sleep Mode*/ diff --git a/include/configs/trats.h b/include/configs/trats.h index 118ceb5250..ee4a583baa 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -11,8 +11,6 @@ #include -#define CONFIG_TRATS - #ifndef CONFIG_SYS_L2CACHE_OFF #define CONFIG_SYS_L2_PL310 #define CONFIG_SYS_PL310_BASE 0x10502000 @@ -128,9 +126,6 @@ /* GPT */ -/* Security subsystem - enable hw_rand() */ -#define CONFIG_EXYNOS_ACE_SHA - /* Common misc for Samsung */ #define CONFIG_MISC_COMMON diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 2d644a8b23..c5df03a9f5 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -116,9 +116,6 @@ /* GPT */ -/* Security subsystem - enable hw_rand() */ -#define CONFIG_EXYNOS_ACE_SHA - /* Common misc for Samsung */ #define CONFIG_MISC_COMMON diff --git a/include/power/fg_battery_cell_params.h b/include/power/fg_battery_cell_params.h index b8c895bbab..500c8ea717 100644 --- a/include/power/fg_battery_cell_params.h +++ b/include/power/fg_battery_cell_params.h @@ -7,7 +7,7 @@ #ifndef __FG_BATTERY_CELL_PARAMS_H_ #define __FG_BATTERY_CELL_PARAMS_H_ -#if defined(CONFIG_POWER_FG_MAX17042) && defined(CONFIG_TRATS) +#if defined(CONFIG_POWER_FG_MAX17042) && defined(CONFIG_TARGET_TRATS) /* Cell characteristics - Exynos4 TRATS development board */ /* Shall be written to addr 0x80h */ diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index c1d32f5879..1cfb8115e3 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -253,7 +253,7 @@ endif INPUTS-y += $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN).sym -ifdef CONFIG_SAMSUNG +ifneq ($(CONFIG_ARCH_EXYNOS)$(CONFIG_ARCH_S5PC1XX),) INPUTS-y += $(obj)/$(BOARD)-spl.bin endif @@ -367,8 +367,8 @@ $(platdata-hdr) $(u-boot-spl-platdata_c) &: $(obj)/$(SPL_BIN).dtb @rm -f $(u-boot-spl-all-platdata_c) $(u-boot-spl-all-platdata) $(call if_changed,dtoc) -ifdef CONFIG_SAMSUNG -ifdef CONFIG_VAR_SIZE_SPL +ifneq ($(CONFIG_ARCH_EXYNOS)$(CONFIG_ARCH_S5PC1XX),) +ifeq ($(CONFIG_EXYNOS5420),y) VAR_SIZE_PARAM = --vs else VAR_SIZE_PARAM =