From: Tom Rini Date: Tue, 7 Apr 2020 15:58:44 +0000 (-0400) Subject: Merge tag 'xilinx-for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot... X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=1f47e2aca42c2e51ff3a7754c717ee13f568c721;p=u-boot.git Merge tag 'xilinx-for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.07 common: - Align ENV_FAT_INTERFACE - Fix MAC address source print log - Improve based autodetection code xilinx: - Enable netconsole Microblaze: - Setup default ENV_OFFSET/ENV_SECT_SIZE Zynq: - Multiple DT updates/fixes - Use DEVICE_TREE environment variable for DTB selection - Switch to single zynq configuration - Enable NOR flash via DM - Minor SPL print removal - Enable i2c mux driver ZynqMP: - Print multiboot register - Enable cache commands in mini mtest - Multiple DT updates/fixes - Fix firmware probing when driver is not enabled - Specify 3rd backup RAM boot mode in SPL - Add SPL support for zcu102 v1.1 and zcu111 revA - Redesign debug uart enabling and psu_init delay - Enable full u-boot run from EL3 - Enable u-boot.itb generation without ATF with U-Boot in EL3 Versal: - Enable distro default - Enable others SPI flashes - Enable systems without DDR Drivers: - Gem: - Flush memory after freeing - Handle mdio bus separately - Watchdog: - Get rid of unused global data pointer - Enable window watchdog timer - Serial: - Change reinitialization logic in zynq serial driver Signed-off-by: Tom Rini --- 1f47e2aca42c2e51ff3a7754c717ee13f568c721 diff --cc arch/arm/dts/stm32mp157a-avenger96.dts index 5bc377d5e3,1f32395e71..80ee9c0a2c --- a/arch/arm/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/dts/stm32mp157a-avenger96.dts @@@ -6,9 -6,8 +6,10 @@@ /dts-v1/; -#include "stm32mp157c.dtsi" -#include "stm32mp157xac-pinctrl.dtsi" +#include "stm32mp157.dtsi" +#include "stm32mp15-pinctrl.dtsi" ++#include "stm32mp157-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" #include #include diff --cc common/image-fit-sig.c index f6caeb0c59,0000000000..490566ca90 mode 100644,000000..100644 --- a/common/image-fit-sig.c +++ b/common/image-fit-sig.c @@@ -1,417 -1,0 +1,450 @@@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2013, Google Inc. + */ + +#ifdef USE_HOSTCC +#include "mkimage.h" +#include +#else +#include +#include +DECLARE_GLOBAL_DATA_PTR; +#endif /* !USE_HOSTCC*/ +#include +#include +#include + +#define IMAGE_MAX_HASHED_NODES 100 + +#ifdef USE_HOSTCC +void *host_blob; + +void image_set_host_blob(void *blob) +{ + host_blob = blob; +} + +void *image_get_host_blob(void) +{ + return host_blob; +} +#endif + +/** + * fit_region_make_list() - Make a list of image regions + * + * Given a list of fdt_regions, create a list of image_regions. This is a + * simple conversion routine since the FDT and image code use different + * structures. + * + * @fit: FIT image + * @fdt_regions: Pointer to FDT regions + * @count: Number of FDT regions + * @region: Pointer to image regions, which must hold @count records. If + * region is NULL, then (except for an SPL build) the array will be + * allocated. + * @return: Pointer to image regions + */ +struct image_region *fit_region_make_list(const void *fit, + struct fdt_region *fdt_regions, + int count, + struct image_region *region) +{ + int i; + + debug("Hash regions:\n"); + debug("%10s %10s\n", "Offset", "Size"); + + /* + * Use malloc() except in SPL (to save code size). In SPL the caller + * must allocate the array. + */ +#ifndef CONFIG_SPL_BUILD + if (!region) + region = calloc(sizeof(*region), count); +#endif + if (!region) + return NULL; + for (i = 0; i < count; i++) { + debug("%10x %10x\n", fdt_regions[i].offset, + fdt_regions[i].size); + region[i].data = fit + fdt_regions[i].offset; + region[i].size = fdt_regions[i].size; + } + + return region; +} + +static int fit_image_setup_verify(struct image_sign_info *info, + const void *fit, int noffset, + int required_keynode, char **err_msgp) +{ + char *algo_name; + const char *padding_name; + + if (fdt_totalsize(fit) > CONFIG_FIT_SIGNATURE_MAX_SIZE) { + *err_msgp = "Total size too large"; + return 1; + } + + if (fit_image_hash_get_algo(fit, noffset, &algo_name)) { + *err_msgp = "Can't get hash algo property"; + return -1; + } + + padding_name = fdt_getprop(fit, noffset, "padding", NULL); + if (!padding_name) + padding_name = RSA_DEFAULT_PADDING_NAME; + + memset(info, '\0', sizeof(*info)); - info->keyname = fdt_getprop(fit, noffset, "key-name-hint", NULL); ++ info->keyname = fdt_getprop(fit, noffset, FIT_KEY_HINT, NULL); + info->fit = (void *)fit; + info->node_offset = noffset; + info->name = algo_name; + info->checksum = image_get_checksum_algo(algo_name); + info->crypto = image_get_crypto_algo(algo_name); + info->padding = image_get_padding_algo(padding_name); + info->fdt_blob = gd_fdt_blob(); + info->required_keynode = required_keynode; + printf("%s:%s", algo_name, info->keyname); + + if (!info->checksum || !info->crypto || !info->padding) { + *err_msgp = "Unknown signature algorithm"; + return -1; + } + + return 0; +} + +int fit_image_check_sig(const void *fit, int noffset, const void *data, + size_t size, int required_keynode, char **err_msgp) +{ + struct image_sign_info info; + struct image_region region; + uint8_t *fit_value; + int fit_value_len; + + *err_msgp = NULL; + if (fit_image_setup_verify(&info, fit, noffset, required_keynode, + err_msgp)) + return -1; + + if (fit_image_hash_get_value(fit, noffset, &fit_value, + &fit_value_len)) { + *err_msgp = "Can't get hash value property"; + return -1; + } + + region.data = data; + region.size = size; + + if (info.crypto->verify(&info, ®ion, 1, fit_value, fit_value_len)) { + *err_msgp = "Verification failed"; + return -1; + } + + return 0; +} + +static int fit_image_verify_sig(const void *fit, int image_noffset, + const char *data, size_t size, + const void *sig_blob, int sig_offset) +{ + int noffset; + char *err_msg = ""; + int verified = 0; + int ret; + + /* Process all hash subnodes of the component image node */ + fdt_for_each_subnode(noffset, fit, image_noffset) { + const char *name = fit_get_name(fit, noffset, NULL); + + if (!strncmp(name, FIT_SIG_NODENAME, + strlen(FIT_SIG_NODENAME))) { + ret = fit_image_check_sig(fit, noffset, data, + size, -1, &err_msg); + if (ret) { + puts("- "); + } else { + puts("+ "); + verified = 1; + break; + } + } + } + + if (noffset == -FDT_ERR_TRUNCATED || noffset == -FDT_ERR_BADSTRUCTURE) { + err_msg = "Corrupted or truncated tree"; + goto error; + } + + return verified ? 0 : -EPERM; + +error: + printf(" error!\n%s for '%s' hash node in '%s' image node\n", + err_msg, fit_get_name(fit, noffset, NULL), + fit_get_name(fit, image_noffset, NULL)); + return -1; +} + +int fit_image_verify_required_sigs(const void *fit, int image_noffset, + const char *data, size_t size, + const void *sig_blob, int *no_sigsp) +{ + int verify_count = 0; + int noffset; + int sig_node; + + /* Work out what we need to verify */ + *no_sigsp = 1; + sig_node = fdt_subnode_offset(sig_blob, 0, FIT_SIG_NODENAME); + if (sig_node < 0) { + debug("%s: No signature node found: %s\n", __func__, + fdt_strerror(sig_node)); + return 0; + } + + fdt_for_each_subnode(noffset, sig_blob, sig_node) { + const char *required; + int ret; + - required = fdt_getprop(sig_blob, noffset, "required", NULL); ++ required = fdt_getprop(sig_blob, noffset, FIT_KEY_REQUIRED, ++ NULL); + if (!required || strcmp(required, "image")) + continue; + ret = fit_image_verify_sig(fit, image_noffset, data, size, + sig_blob, noffset); + if (ret) { + printf("Failed to verify required signature '%s'\n", + fit_get_name(sig_blob, noffset, NULL)); + return ret; + } + verify_count++; + } + + if (verify_count) + *no_sigsp = 0; + + return 0; +} + - int fit_config_check_sig(const void *fit, int noffset, int required_keynode, - char **err_msgp) ++/** ++ * fit_config_check_sig() - Check the signature of a config ++ * ++ * @fit: FIT to check ++ * @noffset: Offset of configuration node (e.g. /configurations/conf-1) ++ * @required_keynode: Offset in the control FDT of the required key node, ++ * if any. If this is given, then the configuration wil not ++ * pass verification unless that key is used. If this is ++ * -1 then any signature will do. ++ * @conf_noffset: Offset of the configuration subnode being checked (e.g. ++ * /configurations/conf-1/kernel) ++ * @err_msgp: In the event of an error, this will be pointed to a ++ * help error string to display to the user. ++ * @return 0 if all verified ok, <0 on error ++ */ ++static int fit_config_check_sig(const void *fit, int noffset, ++ int required_keynode, int conf_noffset, ++ char **err_msgp) +{ + char * const exc_prop[] = {"data"}; + const char *prop, *end, *name; + struct image_sign_info info; + const uint32_t *strings; ++ const char *config_name; + uint8_t *fit_value; + int fit_value_len; ++ bool found_config; + int max_regions; + int i, prop_len; + char path[200]; + int count; + ++ config_name = fit_get_name(fit, conf_noffset, NULL); + debug("%s: fdt=%p, conf='%s', sig='%s'\n", __func__, gd_fdt_blob(), + fit_get_name(fit, noffset, NULL), + fit_get_name(gd_fdt_blob(), required_keynode, NULL)); + *err_msgp = NULL; + if (fit_image_setup_verify(&info, fit, noffset, required_keynode, + err_msgp)) + return -1; + + if (fit_image_hash_get_value(fit, noffset, &fit_value, + &fit_value_len)) { + *err_msgp = "Can't get hash value property"; + return -1; + } + + /* Count the number of strings in the property */ + prop = fdt_getprop(fit, noffset, "hashed-nodes", &prop_len); + end = prop ? prop + prop_len : prop; + for (name = prop, count = 0; name < end; name++) + if (!*name) + count++; + if (!count) { + *err_msgp = "Can't get hashed-nodes property"; + return -1; + } + + if (prop && prop_len > 0 && prop[prop_len - 1] != '\0') { + *err_msgp = "hashed-nodes property must be null-terminated"; + return -1; + } + + /* Add a sanity check here since we are using the stack */ + if (count > IMAGE_MAX_HASHED_NODES) { + *err_msgp = "Number of hashed nodes exceeds maximum"; + return -1; + } + + /* Create a list of node names from those strings */ + char *node_inc[count]; + + debug("Hash nodes (%d):\n", count); ++ found_config = false; + for (name = prop, i = 0; name < end; name += strlen(name) + 1, i++) { + debug(" '%s'\n", name); + node_inc[i] = (char *)name; ++ if (!strncmp(FIT_CONFS_PATH, name, strlen(FIT_CONFS_PATH)) && ++ name[sizeof(FIT_CONFS_PATH) - 1] == '/' && ++ !strcmp(name + sizeof(FIT_CONFS_PATH), config_name)) { ++ debug(" (found config node %s)", config_name); ++ found_config = true; ++ } ++ } ++ if (!found_config) { ++ *err_msgp = "Selected config not in hashed nodes"; ++ return -1; + } + + /* + * Each node can generate one region for each sub-node. Allow for + * 7 sub-nodes (hash-1, signature-1, etc.) and some extra. + */ + max_regions = 20 + count * 7; + struct fdt_region fdt_regions[max_regions]; + + /* Get a list of regions to hash */ + count = fdt_find_regions(fit, node_inc, count, + exc_prop, ARRAY_SIZE(exc_prop), + fdt_regions, max_regions - 1, + path, sizeof(path), 0); + if (count < 0) { + *err_msgp = "Failed to hash configuration"; + return -1; + } + if (count == 0) { + *err_msgp = "No data to hash"; + return -1; + } + if (count >= max_regions - 1) { + *err_msgp = "Too many hash regions"; + return -1; + } + + /* Add the strings */ + strings = fdt_getprop(fit, noffset, "hashed-strings", NULL); + if (strings) { + /* + * The strings region offset must be a static 0x0. + * This is set in tool/image-host.c + */ + fdt_regions[count].offset = fdt_off_dt_strings(fit); + fdt_regions[count].size = fdt32_to_cpu(strings[1]); + count++; + } + + /* Allocate the region list on the stack */ + struct image_region region[count]; + + fit_region_make_list(fit, fdt_regions, count, region); + if (info.crypto->verify(&info, region, count, fit_value, + fit_value_len)) { + *err_msgp = "Verification failed"; + return -1; + } + + return 0; +} + +static int fit_config_verify_sig(const void *fit, int conf_noffset, + const void *sig_blob, int sig_offset) +{ + int noffset; + char *err_msg = ""; + int verified = 0; + int ret; + + /* Process all hash subnodes of the component conf node */ + fdt_for_each_subnode(noffset, fit, conf_noffset) { + const char *name = fit_get_name(fit, noffset, NULL); + + if (!strncmp(name, FIT_SIG_NODENAME, + strlen(FIT_SIG_NODENAME))) { + ret = fit_config_check_sig(fit, noffset, sig_offset, - &err_msg); ++ conf_noffset, &err_msg); + if (ret) { + puts("- "); + } else { + puts("+ "); + verified = 1; + break; + } + } + } + + if (noffset == -FDT_ERR_TRUNCATED || noffset == -FDT_ERR_BADSTRUCTURE) { + err_msg = "Corrupted or truncated tree"; + goto error; + } + - return verified ? 0 : -EPERM; ++ if (verified) ++ return 0; + +error: + printf(" error!\n%s for '%s' hash node in '%s' config node\n", + err_msg, fit_get_name(fit, noffset, NULL), + fit_get_name(fit, conf_noffset, NULL)); - return -1; ++ return -EPERM; +} + +int fit_config_verify_required_sigs(const void *fit, int conf_noffset, + const void *sig_blob) +{ + int noffset; + int sig_node; + + /* Work out what we need to verify */ + sig_node = fdt_subnode_offset(sig_blob, 0, FIT_SIG_NODENAME); + if (sig_node < 0) { + debug("%s: No signature node found: %s\n", __func__, + fdt_strerror(sig_node)); + return 0; + } + + fdt_for_each_subnode(noffset, sig_blob, sig_node) { + const char *required; + int ret; + - required = fdt_getprop(sig_blob, noffset, "required", NULL); ++ required = fdt_getprop(sig_blob, noffset, FIT_KEY_REQUIRED, ++ NULL); + if (!required || strcmp(required, "conf")) + continue; + ret = fit_config_verify_sig(fit, conf_noffset, sig_blob, + noffset); + if (ret) { + printf("Failed to verify required signature '%s'\n", + fit_get_name(sig_blob, noffset, NULL)); + return ret; + } + } + + return 0; +} + +int fit_config_verify(const void *fit, int conf_noffset) +{ + return fit_config_verify_required_sigs(fit, conf_noffset, + gd_fdt_blob()); +}