From: Jonas Karlman <jonas@kwiboo.se>
Date: Wed, 17 May 2023 18:26:30 +0000 (+0000)
Subject: rockchip: rk3566-radxa-cm3-io: Update defconfig
X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=1bf49d5a4a7cab49939c35bd72c78156fcaf41b8;p=u-boot.git

rockchip: rk3566-radxa-cm3-io: Update defconfig

Update defconfig for rk3566-radxa-cm3-io with new defaults. Also add
missing supported mmc modes to sdhci node.

Remove the SPL_ROCKCHIP_BACK_TO_BROM=y option, SPL is expected to load
next stage from a FIT image and then jump to next stage not back to
BootRom.

Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to DRAM or SRAM.

Extend SPL_MAX_SIZE to 0x40000, SPL is loaded to 0x0 and TF-A is loaded
to 0x40000, use the space in between as SPL_MAX_SIZE.

Add config option to include useful gpio cmd.

Remove the CONFIG_NET_RANDOM_ETHADDR=y option, ethaddr and eth1addr is
set based on cpuid read from OTP.

Filter out assigned-clock props with CONFIG_OF_SPL_REMOVE_PROPS,
U-Boot proper will read and configure assigned-clock props.

Add CONFIG_SYS_NS16550_MEM32=y to use 32bit access of serial register.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---

diff --git a/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi b/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi
index d183e93575..a8c31fecaf 100644
--- a/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi
+++ b/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi
@@ -11,6 +11,11 @@
 	};
 };
 
+&sdhci {
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+};
+
 &uart2 {
 	clock-frequency = <24000000>;
 	bootph-all;
diff --git a/configs/radxa-cm3-io-rk3566_defconfig b/configs/radxa-cm3-io-rk3566_defconfig
index 1df9cab79d..dfaacbc883 100644
--- a/configs/radxa-cm3-io-rk3566_defconfig
+++ b/configs/radxa-cm3-io-rk3566_defconfig
@@ -10,9 +10,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
 CONFIG_DEFAULT_DEVICE_TREE="rk3566-radxa-cm3-io"
 CONFIG_ROCKCHIP_RK3568=y
-CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
 CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
-CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK_R_ADDR=0x600000
 CONFIG_TARGET_EVB_RK3568=y
@@ -23,11 +21,12 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-radxa-cm3-io.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_MAX_SIZE=0x20000
+CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x4000000
@@ -36,6 +35,7 @@ CONFIG_SPL_BSS_MAX_SIZE=0x4000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_ATF=y
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -46,7 +46,7 @@ CONFIG_CMD_REGULATOR=y
 # CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_LIVE=y
-CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_SPL_REGMAP=y
 CONFIG_SPL_SYSCON=y
 CONFIG_SPL_CLK=y
@@ -70,6 +70,7 @@ CONFIG_PWM_ROCKCHIP=y
 CONFIG_SPL_RAM=y
 CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
 CONFIG_SYSRESET=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y