From: Simon Glass Date: Thu, 21 Jan 2021 20:57:06 +0000 (-0700) Subject: spl: Tidy up SPL/TPL malloc sizes X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=1426174f3fb0727321531504afbde110ef716573;p=u-boot.git spl: Tidy up SPL/TPL malloc sizes The current help talks about relocation which doesn't apply to SPL and TPL. Update it to avoid confusion. Also make the TPL size default to the same as the SPL size, since this is more likely to be a useful value than the one used by U-Boot proper, which may be quite a bit larger. Signed-off-by: Simon Glass --- diff --git a/Kconfig b/Kconfig index 6dc20ed25b..86f0a39bb0 100644 --- a/Kconfig +++ b/Kconfig @@ -217,22 +217,25 @@ config SYS_MALLOC_LEN TODO: Use for other architectures config SPL_SYS_MALLOC_F_LEN - hex "Size of malloc() pool in SPL before relocation" + hex "Size of malloc() pool in SPL" depends on SYS_MALLOC_F && SPL default 0x2800 if RCAR_GEN3 default SYS_MALLOC_F_LEN help - Before relocation, memory is very limited on many platforms. Still, + In SPL memory is very limited on many platforms. Still, we can provide a small malloc() pool if needed. Driver model in particular needs this to operate, so that it can allocate the initial serial device and any others that are needed. + It is possible to enable CONFIG_SYS_SPL_MALLOC_START to start a new + malloc() region in SDRAM once it is inited. + config TPL_SYS_MALLOC_F_LEN - hex "Size of malloc() pool in TPL before relocation" + hex "Size of malloc() pool in TPL" depends on SYS_MALLOC_F && TPL - default SYS_MALLOC_F_LEN + default SPL_SYS_MALLOC_F_LEN help - Before relocation, memory is very limited on many platforms. Still, + In TPL memory is very limited on many platforms. Still, we can provide a small malloc() pool if needed. Driver model in particular needs this to operate, so that it can allocate the initial serial device and any others that are needed.