From: Mathew McBride Date: Wed, 12 Apr 2023 07:38:24 +0000 (+0000) Subject: arm: dts: fsl-ls1088a: sync usb controller nodes with Linux X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=10ff7e6b043bfc729a5da8a20d7e0d01f550b82b;p=u-boot.git arm: dts: fsl-ls1088a: sync usb controller nodes with Linux Synchronise the USB device tree definition with Linux, allowing the U-Boot control FDT to be used to boot a Linux system with working USB. An extra compatible string, "fsl,layerscape-dwc3" is needed for special handling in U-Boot, so has been added to the -u-boot.dtsi file. It might be better to add this to the Linux source bindings. Signed-off-by: Mathew McBride Reviewed-by: Peng Fan Reviewed-by: Peng Fan Signed-off-by: Peng Fan Reviewed-by: Ioana Ciornei Tested-by: Ioana Ciornei # on LS1088A-RDB --- diff --git a/arch/arm/dts/fsl-ls1088a-u-boot.dtsi b/arch/arm/dts/fsl-ls1088a-u-boot.dtsi index ac30b813ff..3a2291527c 100644 --- a/arch/arm/dts/fsl-ls1088a-u-boot.dtsi +++ b/arch/arm/dts/fsl-ls1088a-u-boot.dtsi @@ -29,3 +29,11 @@ status = "okay"; }; +&usb0 { + compatible = "fsl,layerscape-dwc3", "snps,dwc3"; +}; + +&usb1 { + compatible = "fsl,layerscape-dwc3", "snps,dwc3"; +}; + diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi index bd344ba8e2..ca88b9e9f4 100644 --- a/arch/arm/dts/fsl-ls1088a.dtsi +++ b/arch/arm/dts/fsl-ls1088a.dtsi @@ -256,6 +256,28 @@ status = "disabled"; }; + usb0: usb@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; + }; + + usb1: usb@3110000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3110000 0x0 0x10000>; + interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; + }; + pcie1: pcie@3400000 { compatible = "fsl,ls1088a-pcie"; reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ @@ -490,20 +512,6 @@ interrupts = <0 21 0x4>; /* Level high type */ }; - usb0: usb3@3100000 { - compatible = "fsl,layerscape-dwc3"; - reg = <0x0 0x3100000 0x0 0x10000>; - interrupts = <0 80 0x4>; /* Level high type */ - dr_mode = "host"; - }; - - usb1: usb3@3110000 { - compatible = "fsl,layerscape-dwc3"; - reg = <0x0 0x3110000 0x0 0x10000>; - interrupts = <0 81 0x4>; /* Level high type */ - dr_mode = "host"; - }; - crypto: crypto@8000000 { compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; fsl,sec-era = <8>;