From: Samuel Holland Date: Sun, 22 Jan 2023 23:46:22 +0000 (-0600) Subject: gpio: axp/sunxi: Remove virtual VBUS detection GPIO X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=09cbd3858f156e0461c0c939f23cf3c76ef95dcc;p=u-boot.git gpio: axp/sunxi: Remove virtual VBUS detection GPIO Now that this functionality is modeled using the device tree and regulator uclass, the named GPIO is not referenced anywhere. Remove it. Signed-off-by: Samuel Holland Reviewed-by: Andre Przywara Signed-off-by: Andre Przywara --- diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index 437e86479c..6eaeece4e2 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -209,7 +209,6 @@ enum sunxi_gpio_number { /* Virtual AXP0 GPIOs */ #define SUNXI_GPIO_AXP0_PREFIX "AXP0-" -#define SUNXI_GPIO_AXP0_VBUS_DETECT 4 #define SUNXI_GPIO_AXP0_VBUS_ENABLE 5 #define SUNXI_GPIO_AXP0_GPIO_COUNT 6 diff --git a/drivers/gpio/axp_gpio.c b/drivers/gpio/axp_gpio.c index 35585dc8ac..49672193ff 100644 --- a/drivers/gpio/axp_gpio.c +++ b/drivers/gpio/axp_gpio.c @@ -36,18 +36,11 @@ static int axp_gpio_direction_input(struct udevice *dev, unsigned pin) { u8 reg; - switch (pin) { -#ifndef CONFIG_AXP152_POWER /* NA on axp152 */ - case SUNXI_GPIO_AXP0_VBUS_DETECT: - return 0; -#endif - default: - reg = axp_get_gpio_ctrl_reg(pin); - if (reg == 0) - return -EINVAL; + reg = axp_get_gpio_ctrl_reg(pin); + if (reg == 0) + return -EINVAL; - return pmic_bus_write(reg, AXP_GPIO_CTRL_INPUT); - } + return pmic_bus_write(reg, AXP_GPIO_CTRL_INPUT); } static int axp_gpio_direction_output(struct udevice *dev, unsigned pin, @@ -83,12 +76,6 @@ static int axp_gpio_get_value(struct udevice *dev, unsigned pin) int ret; switch (pin) { -#ifndef CONFIG_AXP152_POWER /* NA on axp152 */ - case SUNXI_GPIO_AXP0_VBUS_DETECT: - ret = pmic_bus_read(AXP_POWER_STATUS, &val); - mask = AXP_POWER_STATUS_VBUS_PRESENT; - break; -#endif #ifdef AXP_MISC_CTRL_N_VBUSEN_FUNC /* Only available on later PMICs */ case SUNXI_GPIO_AXP0_VBUS_ENABLE: diff --git a/drivers/gpio/sunxi_gpio.c b/drivers/gpio/sunxi_gpio.c index 1e85db179a..f0b42e4fdb 100644 --- a/drivers/gpio/sunxi_gpio.c +++ b/drivers/gpio/sunxi_gpio.c @@ -117,11 +117,7 @@ int sunxi_name_to_gpio(const char *name) #if !defined CONFIG_SPL_BUILD && defined CONFIG_AXP_GPIO char lookup[8]; - if (strcasecmp(name, "AXP0-VBUS-DETECT") == 0) { - sprintf(lookup, SUNXI_GPIO_AXP0_PREFIX "%d", - SUNXI_GPIO_AXP0_VBUS_DETECT); - name = lookup; - } else if (strcasecmp(name, "AXP0-VBUS-ENABLE") == 0) { + if (strcasecmp(name, "AXP0-VBUS-ENABLE") == 0) { sprintf(lookup, SUNXI_GPIO_AXP0_PREFIX "%d", SUNXI_GPIO_AXP0_VBUS_ENABLE); name = lookup; diff --git a/include/axp209.h b/include/axp209.h index 414f88a32c..d8bf44f1fa 100644 --- a/include/axp209.h +++ b/include/axp209.h @@ -77,7 +77,6 @@ enum axp209_reg { #ifdef CONFIG_AXP209_POWER #define AXP_POWER_STATUS 0x00 #define AXP_POWER_STATUS_ALDO_IN BIT(0) -#define AXP_POWER_STATUS_VBUS_PRESENT BIT(5) #define AXP_GPIO0_CTRL 0x90 #define AXP_GPIO1_CTRL 0x92 #define AXP_GPIO2_CTRL 0x93 diff --git a/include/axp221.h b/include/axp221.h index 8dfcc5b5a2..32b988f3a9 100644 --- a/include/axp221.h +++ b/include/axp221.h @@ -53,7 +53,6 @@ #ifdef CONFIG_AXP221_POWER #define AXP_POWER_STATUS 0x00 #define AXP_POWER_STATUS_ALDO_IN BIT(0) -#define AXP_POWER_STATUS_VBUS_PRESENT BIT(5) #define AXP_VBUS_IPSOUT 0x30 #define AXP_VBUS_IPSOUT_DRIVEBUS (1 << 2) #define AXP_MISC_CTRL 0x8f diff --git a/include/axp809.h b/include/axp809.h index 8082e402e2..71a7cb2aaa 100644 --- a/include/axp809.h +++ b/include/axp809.h @@ -47,7 +47,6 @@ #ifdef CONFIG_AXP809_POWER #define AXP_POWER_STATUS 0x00 #define AXP_POWER_STATUS_ALDO_IN BIT(0) -#define AXP_POWER_STATUS_VBUS_PRESENT BIT(5) #define AXP_VBUS_IPSOUT 0x30 #define AXP_VBUS_IPSOUT_DRIVEBUS (1 << 2) #define AXP_MISC_CTRL 0x8f diff --git a/include/axp818.h b/include/axp818.h index 8ac517a2bf..08ac35d15f 100644 --- a/include/axp818.h +++ b/include/axp818.h @@ -61,7 +61,6 @@ #ifdef CONFIG_AXP818_POWER #define AXP_POWER_STATUS 0x00 #define AXP_POWER_STATUS_ALDO_IN BIT(0) -#define AXP_POWER_STATUS_VBUS_PRESENT BIT(5) #define AXP_VBUS_IPSOUT 0x30 #define AXP_VBUS_IPSOUT_DRIVEBUS (1 << 2) #define AXP_MISC_CTRL 0x8f