From: Randolph Date: Fri, 29 Dec 2023 08:32:21 +0000 (+0800) Subject: doc: falcon: riscv: Falcon Mode boot on RISC-V X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-favicon.png?a=commitdiff_plain;h=011d07b4d8de909202f0d137a53e83ea110436e3;p=u-boot.git doc: falcon: riscv: Falcon Mode boot on RISC-V Add documentation to introduce the Falcon Mode on RISC-V. In this mode, the boot sequence is SPL -> OpenSBI -> Linux kernel. Signed-off-by: Randolph Reviewed-by: Leo Yu-Chi Liang --- diff --git a/doc/develop/falcon.rst b/doc/develop/falcon.rst index 8a46c0efa1..244b4ccb5c 100644 --- a/doc/develop/falcon.rst +++ b/doc/develop/falcon.rst @@ -256,3 +256,161 @@ the following command: Falcon Mode was presented at the RMLL 2012. Slides are available at: http://schedule2012.rmll.info/IMG/pdf/LSM2012_UbootFalconMode_Babic.pdf + +Falcon Mode Boot on RISC-V +-------------------------- + +Introduction +~~~~~~~~~~~~ + +In the RISC-V environment, OpenSBI is required to enable a supervisor mode +binary to execute certain privileged operations. The typical boot sequence on +RISC-V is SPL -> OpenSBI -> U-Boot -> Linux kernel. SPL will load and start +the OpenSBI initializations, then OpenSBI will bring up the next image, U-Boot +proper. The OpenSBI binary must be prepared in advance of the U-Boot build +process and it will be packed together with U-Boot into a file called +u-boot.itb. + +The Falcon Mode on RISC-V platforms is a distinct boot sequence. Borrowing +ideas from the U-Boot Falcon Mode on ARM, it skips the U-Boot proper phase +in the normal boot process and allows OpenSBI to load and start the Linux +kernel. Its boot sequence is SPL -> OpenSBI -> Linux kernel. The OpenSBI +binary and Linux kernel binary must be prepared prior to the U-Boot build +process and they will be packed together as a FIT image named linux.itb in +this process. + +CONFIG_SPL_LOAD_FIT_OPENSBI_OS_BOOT enables the Falcon Mode boot on RISC-V. +This configuration setting tells OpenSBI that Linux kernel is its next OS +image and makes it load and start the kernel afterwards. + +Note that the Falcon Mode boot bypasses a lot of initializations by U-Boot. +If the Linux kernel expects hardware initializations by U-Boot, make sure to +port the relevant code to the SPL build process. + +Configuration +~~~~~~~~~~~~~ + +CONFIG_SPL_LOAD_FIT_ADDRESS + Specifies the address to load u-boot.itb in a normal boot. When the Falcon + Mode boot is enabled, it specifies the load address of linux.itb. + +CONFIG_SYS_TEXT_BASE + Specifies the address of the text section for a u-boot proper in a normal + boot. When the Falcon Mode boot is enabled, it specifies the text section + address for the Linux kernel image. + +CONFIG_SPL_PAYLOAD_ARGS_ADDR + The address in the RAM to which the FDT blob is to be moved by the SPL. + SPL places the FDT blob right after the kernel. As the kernel does not + include the BSS section in its size calculation, SPL ends up placing + the FDT blob within the BSS section of the kernel. This may cause the + FDT blob to be cleared during kernel BSS initialization. To avoid the + issue, be sure to move the FDT blob out of the kernel first. + +CONFIG_SPL_LOAD_FIT_OPENSBI_OS_BOOT + Activates the Falcon Mode boot on RISC-V. + +Example for Andes AE350 Board +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +A FDT blob is required to boot the Linux kernel from the SPL. Andes AE350 +platforms generally come with a builtin dtb. To load a custom DTB, follow +these steps: + +1. Load the custom DTB to SDRAM:: + + => fatload mmc 0:1 0x20000000 user_custom.dtb + +2. Set the SPI speed:: + + => sf probe 0:0 50000000 0 + +3. Erase sectors from the SPI Flash:: + + => sf erase 0xf0000 0x10000 + +4. Write the FDT blob to the erased sectors of the Flash:: + + => sf write 0x20000000 0xf0000 0x10000 + +Console Log of AE350 Falcon Mode Boot +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +:: + + U-Boot SPL 2023.01-00031-g777ecdea66 (Oct 31 2023 - 18:41:36 +0800) + Trying to boot from RAM + + OpenSBI v1.2-51-g7304e42 + ____ _____ ____ _____ + / __ \ / ____| _ \_ _| + | | | |_ __ ___ _ __ | (___ | |_) || | + | | | | '_ \ / _ \ '_ \ \___ \| _ < | | + | |__| | |_) | __/ | | |____) | |_) || |_ + \____/| .__/ \___|_| |_|_____/|____/_____| + | | + |_| + + Platform Name : andestech,ax25 + Platform Features : medeleg + Platform HART Count : 1 + Platform IPI Device : andes_plicsw + Platform Timer Device : andes_plmt @ 60000000Hz + Platform Console Device : uart8250 + Platform HSM Device : andes_smu + Platform PMU Device : andes_pmu + Platform Reboot Device : atcwdt200 + Platform Shutdown Device : --- + Firmware Base : 0x0 + Firmware Size : 196 KB + Runtime SBI Version : 1.0 + + Domain0 Name : root + Domain0 Boot HART : 0 + Domain0 HARTs : 0* + Domain0 Region00 : 0x0000000000000000-0x000000000003ffff () + Domain0 Region01 : 0x00000000e6000000-0x00000000e60fffff (I,R) + Domain0 Region02 : 0x00000000e6400000-0x00000000e67fffff (I) + Domain0 Region03 : 0x0000000000000000-0xffffffffffffffff (R,W,X) + Domain0 Next Address : 0x0000000001800000 + Domain0 Next Arg1 : 0x0000000001700000 + Domain0 Next Mode : S-mode + Domain0 SysReset : yes + + Boot HART ID : 0 + Boot HART Domain : root + Boot HART Priv Version : v1.11 + Boot HART Base ISA : rv64imafdcx + Boot HART ISA Extensions : none + Boot HART PMP Count : 8 + Boot HART PMP Granularity : 4 + Boot HART PMP Address Bits: 31 + Boot HART MHPM Count : 4 + Boot HART MHPM Bits : 64 + Boot HART MIDELEG : 0x0000000000000222 + Boot HART MEDELEG : 0x000000000000b109 + [ 0.000000] Linux version 6.1.47-09019-g0584b09ad862-dirty + [ 0.000000] OF: fdt: Ignoring memory range 0x0 - 0x1800000 + [ 0.000000] Machine model: andestech,ax25 + [ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '') + [ 0.000000] printk: bootconsole [sbi0] enabled + [ 0.000000] Disabled 4-level and 5-level paging + [ 0.000000] efi: UEFI not found. + [ 0.000000] Zone ranges: + [ 0.000000] DMA32 [mem 0x0000000001800000-0x000000003fffffff] + [ 0.000000] Normal empty + [ 0.000000] Movable zone start for each node + [ 0.000000] Early memory node ranges + [ 0.000000] node 0: [mem 0x0000000001800000-0x000000003fffffff] + [ 0.000000] Initmem setup node 0 [mem 0x0000000001800000-0x000000003fffffff] + [ 0.000000] SBI specification v1.0 detected + [ 0.000000] SBI implementation ID=0x1 Version=0x10002 + [ 0.000000] SBI TIME extension detected + [ 0.000000] SBI IPI extension detected + [ 0.000000] SBI RFENCE extension detected + [ 0.000000] SBI SRST extension detected + [ 0.000000] SBI HSM extension detected + [ 0.000000] riscv: base ISA extensions acim + [ 0.000000] riscv: ELF capabilities acim + [ 0.000000] percpu: Embedded 18 pages/cpu s35000 r8192 d30536 u73728 + [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 252500