arm64: zynqmp: Update device tree properties for nand flash

Update the following device tree properties for nand flash

- Set software ecc mode.
- Set bch as ecc algo.
- Set read block to 0.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
index 92d938d665d20ad6ccd9b7bdf5c0eda7887f0e4f..3204456e64519d7d6b93d1b1b41db75f8d287669 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
@@ -124,6 +124,10 @@
                reg = <0x0>;
                #address-cells = <0x2>;
                #size-cells = <0x1>;
+               nand-ecc-mode = "soft";
+               nand-ecc-algo = "bch";
+               nand-rb = <0>;
+               label = "main-storage-0";
 
                partition@0 {   /* for testing purpose */
                        label = "nand-fsbl-uboot";
@@ -154,6 +158,10 @@
                reg = <0x1>;
                #address-cells = <0x2>;
                #size-cells = <0x1>;
+               nand-ecc-mode = "soft";
+               nand-ecc-algo = "bch";
+               nand-rb = <0>;
+               label = "main-storage-1";
 
                partition@0 {   /* for testing purpose */
                        label = "nand1-fsbl-uboot";