arm: mach-k3: am642: Use mmc start and stop callbacks

To avoid any glitches on MMC clock line, make use of pm per and post
callbacks when loading sysfw.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>

diff --git a/arch/arm/mach-k3/am642_init.c b/arch/arm/mach-k3/am642_init.c
index b2c3774854e70f09b3b46515850b4a92f38573a5..d09fc59146ad47e81541d1eac4fba2e6ed751693 100644 (file)
--- a/arch/arm/mach-k3/am642_init.c
+++ b/arch/arm/mach-k3/am642_init.c
@@ -19,6 +19,7 @@
 #include <dm.h>
 #include <dm/uclass-internal.h>
 #include <dm/pinctrl.h>
+#include <mmc.h>
 
 #if defined(CONFIG_SPL_BUILD)
 
@@ -51,6 +52,36 @@ static void store_boot_info_from_rom(void)
               sizeof(struct rom_extended_boot_data));
 }
 
+#if defined(CONFIG_K3_LOAD_SYSFW) && CONFIG_IS_ENABLED(DM_MMC)
+void k3_mmc_stop_clock(void)
+{
+       if (spl_boot_device() == BOOT_DEVICE_MMC1) {
+               struct mmc *mmc = find_mmc_device(0);
+
+               if (!mmc)
+                       return;
+
+               mmc->saved_clock = mmc->clock;
+               mmc_set_clock(mmc, 0, true);
+       }
+}
+
+void k3_mmc_restart_clock(void)
+{
+       if (spl_boot_device() == BOOT_DEVICE_MMC1) {
+               struct mmc *mmc = find_mmc_device(0);
+
+               if (!mmc)
+                       return;
+
+               mmc_set_clock(mmc, mmc->saved_clock, false);
+       }
+}
+#else
+void k3_mmc_stop_clock(void) {}
+void k3_mmc_restart_clock(void) {}
+#endif
+
 void board_init_f(ulong dummy)
 {
 #if defined(CONFIG_K3_LOAD_SYSFW)
@@ -94,7 +125,8 @@ void board_init_f(ulong dummy)
         * system firmware and if so, will only perform needed config
         * and not attempt to load firmware again.
         */
-       k3_sysfw_loader(is_rom_loaded_sysfw(&bootdata), NULL, NULL);
+       k3_sysfw_loader(is_rom_loaded_sysfw(&bootdata), k3_mmc_stop_clock,
+                       k3_mmc_restart_clock);
 #endif
 
        /* Output System Firmware version info */