spi: omap3_spi: Fix speed and mode selection

McSPI IP provides per CS specific speed and mode selection. Therefore it
is possible to apply these settings only after CS is known. But
set_speed and set_mode can be called without bus being claimed, this
would lead driver to set up wrong CS (or previously used CS).

Fix this by apply set_speed and set_mode only if bus is already claimed.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>

diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
index 78e2a25cdb420bbcfc55943d3929834e2d736bed..74931768c0fc3d9c149b9dbbcb47eca64251264d 100644 (file)
--- a/drivers/spi/omap3_spi.c
+++ b/drivers/spi/omap3_spi.c
@@ -37,6 +37,8 @@ struct omap3_spi_priv {
        unsigned int mode;
        unsigned int wordlen;
        unsigned int pin_dir:1;
+
+       bool bus_claimed;
 };
 
 static void omap3_spi_write_chconf(struct omap3_spi_priv *priv, int val)
@@ -372,6 +374,8 @@ static void _omap3_spi_claim_bus(struct omap3_spi_priv *priv)
        conf |= OMAP3_MCSPI_MODULCTRL_SINGLE;
 
        writel(conf, &priv->regs->modulctrl);
+
+       priv->bus_claimed = true;
 }
 
 static int omap3_spi_claim_bus(struct udevice *dev)
@@ -381,9 +385,12 @@ static int omap3_spi_claim_bus(struct udevice *dev)
        struct dm_spi_slave_plat *slave_plat = dev_get_parent_plat(dev);
 
        priv->cs = slave_plat->cs;
-       priv->freq = slave_plat->max_hz;
+       if (!priv->freq)
+               priv->freq = slave_plat->max_hz;
 
        _omap3_spi_claim_bus(priv);
+       _omap3_spi_set_speed(priv);
+       _omap3_spi_set_mode(priv);
 
        return 0;
 }
@@ -395,6 +402,8 @@ static int omap3_spi_release_bus(struct udevice *dev)
 
        writel(OMAP3_MCSPI_MODULCTRL_MS, &priv->regs->modulctrl);
 
+       priv->bus_claimed = false;
+
        return 0;
 }
 
@@ -440,7 +449,8 @@ static int omap3_spi_set_speed(struct udevice *dev, unsigned int speed)
        struct omap3_spi_priv *priv = dev_get_priv(dev);
 
        priv->freq = speed;
-       _omap3_spi_set_speed(priv);
+       if (priv->bus_claimed)
+               _omap3_spi_set_speed(priv);
 
        return 0;
 }
@@ -451,7 +461,8 @@ static int omap3_spi_set_mode(struct udevice *dev, uint mode)
 
        priv->mode = mode;
 
-       _omap3_spi_set_mode(priv);
+       if (priv->bus_claimed)
+               _omap3_spi_set_mode(priv);
 
        return 0;
 }