net: pfe_eth: Use spi_flash_read API to access flash memory

Current PFE firmware access spi-nor memory directly. New spi-mem
framework does not support direct memory access. So, let's use
spi_flash_read API to access memory instead of directly using it.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

diff --git a/drivers/net/pfe_eth/pfe_firmware.c b/drivers/net/pfe_eth/pfe_firmware.c
index 0493cfe8724450bd007dc5f25cd246a3fbea827b..55e661c0e1d55c04d9ca05a7ca6b865a784cfac9 100644 (file)
--- a/drivers/net/pfe_eth/pfe_firmware.c
+++ b/drivers/net/pfe_eth/pfe_firmware.c
@@ -16,13 +16,14 @@
 #include <linux/bitops.h>
 #include <net/pfe_eth/pfe_eth.h>
 #include <net/pfe_eth/pfe_firmware.h>
+#include <spi_flash.h>
 #ifdef CONFIG_CHAIN_OF_TRUST
 #include <fsl_validate.h>
 #endif
 
 #define PFE_FIRMWARE_FIT_CNF_NAME      "config@1"
 
-static const void *pfe_fit_addr = (void *)CONFIG_SYS_LS_PFE_FW_ADDR;
+static const void *pfe_fit_addr;
 
 /*
  * PFE elf firmware loader.
@@ -163,6 +164,44 @@ static int pfe_fit_check(void)
        return ret;
 }
 
+int pfe_spi_flash_init(void)
+{
+       struct spi_flash *pfe_flash;
+       int ret = 0;
+       void *addr = malloc(CONFIG_SYS_QE_FMAN_FW_LENGTH);
+
+#ifdef CONFIG_DM_SPI_FLASH
+       struct udevice *new;
+
+       /* speed and mode will be read from DT */
+       ret = spi_flash_probe_bus_cs(CONFIG_ENV_SPI_BUS,
+                                    CONFIG_ENV_SPI_CS, 0, 0, &new);
+
+       pfe_flash = dev_get_uclass_priv(new);
+#else
+       pfe_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS,
+                                   CONFIG_ENV_SPI_CS,
+                                   CONFIG_ENV_SPI_MAX_HZ,
+                                   CONFIG_ENV_SPI_MODE);
+#endif
+       if (!pfe_flash) {
+               printf("SF: probe for pfe failed\n");
+               return -ENODEV;
+       }
+
+       ret = spi_flash_read(pfe_flash,
+                            CONFIG_SYS_LS_PFE_FW_ADDR,
+                            CONFIG_SYS_QE_FMAN_FW_LENGTH,
+                            addr);
+       if (ret)
+               printf("SF: read for pfe failed\n");
+
+       pfe_fit_addr = addr;
+       spi_flash_free(pfe_flash);
+
+       return ret;
+}
+
 /*
  * PFE firmware initialization.
  * Loads different firmware files from FIT image.
@@ -187,6 +226,10 @@ int pfe_firmware_init(void)
        int ret = 0;
        int fw_count;
 
+       ret = pfe_spi_flash_init();
+       if (ret)
+               goto err;
+
        ret = pfe_fit_check();
        if (ret)
                goto err;

diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index 3bea9a9186860c637190bc7c155e920259994dcf..06af8bf79fefdc2a3b90ce6186fd930637cfcbdc 100644 (file)
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -36,8 +36,11 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 1024 * 1024)
 
-/*SPI device */
+/* PFE */
 #define CONFIG_SYS_FMAN_FW_ADDR                0x400d0000
+#define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x300000
+
+/*SPI device */
 #define CONFIG_SYS_FSL_QSPI_BASE       0x40000000
 
 /* SATA */