support blackfin board initialization in generic board_f

- init hardware watchdog if applicable
- use CONFIG_SYS_MONITOR_LEN as the gd monitor len for Blackfin
- reserve u-boot memory at the top field of the RAM for Blackfin
- avoid refer to CONFIG_SYS_MONITOR_LEN, which is not defined by Blackfin

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>

diff --git a/common/board_f.c b/common/board_f.c
index 6203d85619e4917abb393bbe432f19a26880458b..d5e7622eebbdfb0cf82aba249ed75a9325e42470 100644 (file)
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -106,9 +106,14 @@ __weak void blue_led_off(void) {}
  * Could the CONFIG_SPL_BUILD infection become a flag in gd?
  */
 
-#if defined(CONFIG_WATCHDOG)
+#if defined(CONFIG_WATCHDOG) || defined(CONFIG_HW_WATCHDOG)
 static int init_func_watchdog_init(void)
 {
+# if defined(CONFIG_HW_WATCHDOG) && (defined(CONFIG_BLACKFIN) || \
+       defined(CONFIG_M68K) || defined(CONFIG_MICROBLAZE) || \
+       defined(CONFIG_SH))
+       hw_watchdog_init();
+# endif
        puts("       Watchdog enabled\n");
        WATCHDOG_RESET();
 
@@ -146,7 +151,11 @@ static int display_text_info(void)
        bss_end = (ulong)&__bss_end;
 
        debug("U-Boot code: %08X -> %08lX  BSS: -> %08lX\n",
+#ifdef CONFIG_SYS_TEXT_BASE
              CONFIG_SYS_TEXT_BASE, bss_start, bss_end);
+#else
+             CONFIG_SYS_MONITOR_BASE, bss_start, bss_end);
+#endif
 #endif
 
 #ifdef CONFIG_MODEM_SUPPORT
@@ -261,6 +270,8 @@ static int setup_mon_len(void)
        gd->mon_len = (ulong)&__bss_end - (ulong)_start;
 #elif defined(CONFIG_SANDBOX)
        gd->mon_len = (ulong)&_end - (ulong)_init;
+#elif defined(CONFIG_BLACKFIN)
+       gd->mon_len = CONFIG_SYS_MONITOR_LEN;
 #else
        /* TODO: use (ulong)&__bss_end - (ulong)&__text_start; ? */
        gd->mon_len = (ulong)&__bss_end - CONFIG_SYS_MONITOR_BASE;
@@ -470,8 +481,9 @@ static int reserve_trace(void)
        return 0;
 }
 
-#if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) || defined(CONFIG_8xx)) \
-               && !defined(CONFIG_ARM) && !defined(CONFIG_X86)
+#if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) || defined(CONFIG_8xx)) && \
+               !defined(CONFIG_ARM) && !defined(CONFIG_X86) && \
+               !defined(CONFIG_BLACKFIN)
 static int reserve_video(void)
 {
        /* reserve memory for video display (always full pages) */
@@ -516,11 +528,13 @@ static int reserve_malloc(void)
 /* (permanently) allocate a Board Info struct */
 static int reserve_board(void)
 {
-       gd->start_addr_sp -= sizeof(bd_t);
-       gd->bd = (bd_t *)map_sysmem(gd->start_addr_sp, sizeof(bd_t));
-       memset(gd->bd, '\0', sizeof(bd_t));
-       debug("Reserving %zu Bytes for Board Info at: %08lx\n",
-                       sizeof(bd_t), gd->start_addr_sp);
+       if (!gd->bd) {
+               gd->start_addr_sp -= sizeof(bd_t);
+               gd->bd = (bd_t *)map_sysmem(gd->start_addr_sp, sizeof(bd_t));
+               memset(gd->bd, '\0', sizeof(bd_t));
+               debug("Reserving %zu Bytes for Board Info at: %08lx\n",
+                     sizeof(bd_t), gd->start_addr_sp);
+       }
        return 0;
 }
 #endif
@@ -721,7 +735,9 @@ static int reloc_fdt(void)
 
 static int setup_reloc(void)
 {
+#ifdef CONFIG_SYS_TEXT_BASE
        gd->reloc_off = gd->relocaddr - CONFIG_SYS_TEXT_BASE;
+#endif
        memcpy(gd->new_gd, (char *)gd, sizeof(gd_t));
 
        debug("Relocation Offset is: %08lx\n", gd->reloc_off);
@@ -828,7 +844,7 @@ static init_fnc_t init_sequence_f[] = {
        /* TODO: can we rename this to timer_init()? */
        init_timebase,
 #endif
-#if defined(CONFIG_ARM) || defined(CONFIG_MIPS)
+#if defined(CONFIG_ARM) || defined(CONFIG_MIPS) || defined(CONFIG_BLACKFIN)
        timer_init,             /* initialize timer */
 #endif
 #ifdef CONFIG_SYS_ALLOC_DPRAM
@@ -929,6 +945,10 @@ static init_fnc_t init_sequence_f[] = {
         *  - board info struct
         */
        setup_dest_addr,
+#if defined(CONFIG_BLACKFIN)
+       /* Blackfin u-boot monitor should be on top of the ram */
+       reserve_uboot,
+#endif
 #if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR)
        reserve_logbuffer,
 #endif
@@ -945,11 +965,14 @@ static init_fnc_t init_sequence_f[] = {
 #endif
        reserve_trace,
        /* TODO: Why the dependency on CONFIG_8xx? */
-#if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) || defined(CONFIG_8xx)) \
-               && !defined(CONFIG_ARM) && !defined(CONFIG_X86)
+#if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) || defined(CONFIG_8xx)) && \
+               !defined(CONFIG_ARM) && !defined(CONFIG_X86) && \
+               !defined(CONFIG_BLACKFIN)
        reserve_video,
 #endif
+#if !defined(CONFIG_BLACKFIN)
        reserve_uboot,
+#endif
 #ifndef CONFIG_SPL_BUILD
        reserve_malloc,
        reserve_board,

diff --git a/include/watchdog.h b/include/watchdog.h
index bd0a8d6b19fdef0a9d9467f1a25747ca02976cc1..9273fa1e8090a4ae2262459a9c26b494e528edfc 100644 (file)
--- a/include/watchdog.h
+++ b/include/watchdog.h
@@ -21,7 +21,8 @@
 int init_func_watchdog_reset(void);
 #endif
 
-#ifdef CONFIG_WATCHDOG
+#if defined(CONFIG_SYS_GENERIC_BOARD) && \
+       (defined(CONFIG_WATCHDOG) || defined(CONFIG_HW_WATCHDOG))
 #define INIT_FUNC_WATCHDOG_INIT        init_func_watchdog_init,
 #define INIT_FUNC_WATCHDOG_RESET       init_func_watchdog_reset,
 #else