RPI: Add memory map for bcm2711

Define the memory map for the BCM2711 based on the dt configuration
available in the Raspberry Pi kernel fork.

Signed-off-by: Andrei Gherzan <andrei@balena.io>
[mb: BCM2838 -> BCM2711]
Signed-off-by: Matthias Brugger <mbrugger@suse.com>

diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index b57df21f26b8da6179bf479763bdc607a3adc86c..fa57d50c95edfb6ab8bcbf5b4bda41208e05d2b9 100644 (file)
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -249,7 +249,8 @@ static uint32_t rev_type;
 static const struct rpi_model *model;
 
 #ifdef CONFIG_ARM64
-static struct mm_region bcm2837_mem_map[] = {
+#ifndef CONFIG_BCM2711
+static struct mm_region bcm283x_mem_map[] = {
        {
                .virt = 0x00000000UL,
                .phys = 0x00000000UL,
@@ -268,8 +269,28 @@ static struct mm_region bcm2837_mem_map[] = {
                0,
        }
 };
-
-struct mm_region *mem_map = bcm2837_mem_map;
+#else
+static struct mm_region bcm283x_mem_map[] = {
+       {
+               .virt = 0x00000000UL,
+               .phys = 0x00000000UL,
+               .size = 0xfe000000UL,
+               .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+                        PTE_BLOCK_INNER_SHARE
+       }, {
+               .virt = 0xfe000000UL,
+               .phys = 0xfe000000UL,
+               .size = 0x01800000UL,
+               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+                        PTE_BLOCK_NON_SHARE |
+                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
+       }, {
+               /* List terminator */
+               0,
+       }
+};
+#endif
+struct mm_region *mem_map = bcm283x_mem_map;
 #endif
 
 int dram_init(void)