rockchip: rk3588-quartzpro64: Enable AHCI, PCI and USB

Enable Kconfig options to support AHCI, PCI and USB features. This help
keep rk3588-quartzpro64 in sync with other RK3588 boards.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

diff --git a/configs/quartzpro64-rk3588_defconfig b/configs/quartzpro64-rk3588_defconfig
index fd8304debdbbdd4f1d360dda7ccd428b4da8095c..bbbd2770f364b5fa9a115dfb43803acf010e2b5f 100644 (file)
--- a/configs/quartzpro64-rk3588_defconfig
+++ b/configs/quartzpro64-rk3588_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SYS_HAS_NONCACHED_MEMORY=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_TEXT_BASE=0x00a00000
@@ -18,7 +19,9 @@ CONFIG_SPL_STACK=0x400000
 CONFIG_DEBUG_UART_BASE=0xFEB50000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_FIT_SIGNATURE=y
@@ -39,15 +42,21 @@ CONFIG_SPL_STACK_R=y
 CONFIG_SPL_ATF=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_REGULATOR=y
 # CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_LIVE=y
 CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_SPL_REGMAP=y
 CONFIG_SPL_SYSCON=y
+CONFIG_AHCI_PCI=y
+CONFIG_DWC_AHCI=y
 CONFIG_SPL_CLK=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
@@ -63,11 +72,27 @@ CONFIG_MMC_SDHCI_ROCKCHIP=y
 CONFIG_PHY_REALTEK=y
 CONFIG_DWC_ETH_QOS=y
 CONFIG_DWC_ETH_QOS_ROCKCHIP=y
+CONFIG_RTL8169=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_PHY_ROCKCHIP_USBDP=y
+CONFIG_SPL_PINCTRL=y
 CONFIG_REGULATOR_PWM=y
 CONFIG_PWM_ROCKCHIP=y
 CONFIG_SPL_RAM=y
+CONFIG_SCSI=y
 CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550_MEM32=y
 CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
 CONFIG_ERRNO_STR=y