spi: kirkwood: Drop nondm code

Drop the nondm code from kirkwood_spi.c since there
is no board or any other code using for it.

Signed-off-by: Bhargav Shah <bhargavshah1988@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 8fccfbf20de1fbad52f96dcccc97fa325b55a115..3a8add98f76f4f47025db121748f51d74dce7f3e 100644 (file)
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -162,6 +162,12 @@ config ICH_SPI
          access the SPI NOR flash on platforms embedding this Intel
          ICH IP core.
 
+config KIRKWOOD_SPI
+       bool "Marvell Kirkwood SPI Driver"
+       help
+         Enable support for SPI on various Marvell SoCs, such as
+         Kirkwood and Armada 375.
+
 config MESON_SPIFC
        bool "Amlogic Meson SPI Flash Controller driver"
        depends on ARCH_MESON
@@ -424,12 +430,6 @@ config SH_QSPI
          Enable the Renesas Quad SPI controller driver. This driver can be
          used on Renesas SoCs.
 
-config KIRKWOOD_SPI
-       bool "Marvell Kirkwood SPI Driver"
-       help
-         Enable support for SPI on various Marvell SoCs, such as
-         Kirkwood and Armada 375.
-
 config MXC_SPI
        bool "MXC SPI Driver"
        help

diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c
index c03923f87494986b37abbc7c1bb25500b2e0560f..92dc2e13c55cae46515f8354ab6bf26e11cf613d 100644 (file)
--- a/drivers/spi/kirkwood_spi.c
+++ b/drivers/spi/kirkwood_spi.c
@@ -19,6 +19,19 @@
 #endif
 #include <asm/arch-mvebu/spi.h>
 
+struct mvebu_spi_dev {
+       bool                    is_errata_50mhz_ac;
+};
+
+struct mvebu_spi_platdata {
+       struct kwspi_registers *spireg;
+       bool is_errata_50mhz_ac;
+};
+
+struct mvebu_spi_priv {
+       struct kwspi_registers *spireg;
+};
+
 static void _spi_cs_activate(struct kwspi_registers *reg)
 {
        setbits_le32(&reg->ctrl, KWSPI_CSN_ACT);
@@ -94,128 +107,6 @@ static int _spi_xfer(struct kwspi_registers *reg, unsigned int bitlen,
        return 0;
 }
 
-#if !CONFIG_IS_ENABLED(DM_SPI)
-
-static struct kwspi_registers *spireg =
-       (struct kwspi_registers *)MVEBU_SPI_BASE;
-
-#ifdef CONFIG_ARCH_KIRKWOOD
-static u32 cs_spi_mpp_back[2];
-#endif
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
-                               unsigned int max_hz, unsigned int mode)
-{
-       struct spi_slave *slave;
-       u32 data;
-#ifdef CONFIG_ARCH_KIRKWOOD
-       static const u32 kwspi_mpp_config[2][2] = {
-               { MPP0_SPI_SCn, 0 }, /* if cs == 0 */
-               { MPP7_SPI_SCn, 0 } /* if cs != 0 */
-       };
-#endif
-
-       if (!spi_cs_is_valid(bus, cs))
-               return NULL;
-
-       slave = spi_alloc_slave_base(bus, cs);
-       if (!slave)
-               return NULL;
-
-       writel(KWSPI_SMEMRDY, &spireg->ctrl);
-
-       /* calculate spi clock prescaller using max_hz */
-       data = ((CONFIG_SYS_TCLK / 2) / max_hz) + 0x10;
-       data = data < KWSPI_CLKPRESCL_MIN ? KWSPI_CLKPRESCL_MIN : data;
-       data = data > KWSPI_CLKPRESCL_MASK ? KWSPI_CLKPRESCL_MASK : data;
-
-       /* program spi clock prescaller using max_hz */
-       writel(KWSPI_ADRLEN_3BYTE | data, &spireg->cfg);
-       debug("data = 0x%08x\n", data);
-
-       writel(KWSPI_SMEMRDIRQ, &spireg->irq_cause);
-       writel(KWSPI_IRQMASK, &spireg->irq_mask);
-
-#ifdef CONFIG_ARCH_KIRKWOOD
-       /* program mpp registers to select  SPI_CSn */
-       kirkwood_mpp_conf(kwspi_mpp_config[cs ? 1 : 0], cs_spi_mpp_back);
-#endif
-
-       return slave;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
-#ifdef CONFIG_ARCH_KIRKWOOD
-       kirkwood_mpp_conf(cs_spi_mpp_back, NULL);
-#endif
-       free(slave);
-}
-
-__attribute__((weak)) int board_spi_claim_bus(struct spi_slave *slave)
-{
-       return 0;
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
-       return board_spi_claim_bus(slave);
-}
-
-__attribute__((weak)) void board_spi_release_bus(struct spi_slave *slave)
-{
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
-       board_spi_release_bus(slave);
-}
-
-#ifndef CONFIG_SPI_CS_IS_VALID
-/*
- * you can define this function board specific
- * define above CONFIG in board specific config file and
- * provide the function in board specific src file
- */
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-       return bus == 0 && (cs == 0 || cs == 1);
-}
-#endif
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-       _spi_cs_activate(spireg);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-       _spi_cs_deactivate(spireg);
-}
-
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
-            const void *dout, void *din, unsigned long flags)
-{
-       return _spi_xfer(spireg, bitlen, dout, din, flags);
-}
-
-#else
-
-/* Here now the DM part */
-
-struct mvebu_spi_dev {
-       bool                    is_errata_50mhz_ac;
-};
-
-struct mvebu_spi_platdata {
-       struct kwspi_registers *spireg;
-       bool is_errata_50mhz_ac;
-};
-
-struct mvebu_spi_priv {
-       struct kwspi_registers *spireg;
-};
-
 static int mvebu_spi_set_speed(struct udevice *bus, uint hz)
 {
        struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
@@ -409,4 +300,3 @@ U_BOOT_DRIVER(mvebu_spi) = {
        .priv_auto_alloc_size = sizeof(struct mvebu_spi_priv),
        .probe = mvebu_spi_probe,
 };
-#endif

diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 893dc9fb98485c9261e9ead745a54eee66807c0b..699d6ce042dfd079e58b833a3f8e15392b5e6f9d 100644 (file)
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1613,7 +1613,6 @@ CONFIG_SPEAR_USBBOOT
 CONFIG_SPEAR_USBTTY
 CONFIG_SPI_ADDR
 CONFIG_SPI_BOOTING
-CONFIG_SPI_CS_IS_VALID
 CONFIG_SPI_DATAFLASH_WRITE_VERIFY
 CONFIG_SPI_FLASH_QUAD
 CONFIG_SPI_FLASH_SIZE