${LIST_86xx} \
"
-LIST_ppc=" \
+LIST_powerpc=" \
${LIST_5xx} \
${LIST_512x} \
${LIST_5xxx} \
${LIST_7xx} \
"
+# Alias "ppc" -> "powerpc" to not break compatibility with older scripts
+# still using "ppc" instead of "powerpc"
+LIST_ppc=" \
+ ${LIST_powerpc} \
+"
+
#########################################################################
## StrongARM Systems
#########################################################################
#-----------------------------------------------------------------------
-#----- for now, just run PPC by default -----
-[ $# = 0 ] && set $LIST_ppc
+#----- for now, just run PowerPC by default -----
+[ $# = 0 ] && set $LIST_powerpc
#-----------------------------------------------------------------------
|microblaze \
|mips|mips_el \
|nios|nios2 \
- |ppc|5xx|5xxx|512x|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx|TSEC \
+ |ppc|powerpc|5xx|5xxx|512x|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx|TSEC \
|sh|sh2|sh3|sh4 \
|sparc \
|x86|I486 \
#########################################################################
-ifeq ($(ARCH),powerpc)
-ARCH = ppc
-endif
-
# The "tools" are needed early, so put this first
# Don't include stuff already done in $(LIBS)
SUBDIRS = tools \
endif
ifeq ($(CPU),mpc85xx)
LIBS += drivers/qe/qe.a
-LIBS += arch/ppc/cpu/mpc8xxx/ddr/libddr.a
-LIBS += arch/ppc/cpu/mpc8xxx/lib8xxx.a
+LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.a
+LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a
endif
ifeq ($(CPU),mpc86xx)
-LIBS += arch/ppc/cpu/mpc8xxx/ddr/libddr.a
-LIBS += arch/ppc/cpu/mpc8xxx/lib8xxx.a
+LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.a
+LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a
endif
LIBS += drivers/rtc/librtc.a
LIBS += drivers/serial/libserial.a
#########################################################################
canmb_config: unconfig
- @$(MKCONFIG) -a canmb ppc mpc5xxx canmb
+ @$(MKCONFIG) -a canmb powerpc mpc5xxx canmb
cmi_mpc5xx_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi
+ @$(MKCONFIG) $(@:_config=) powerpc mpc5xx cmi
PATI_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl
+ @$(MKCONFIG) $(@:_config=) powerpc mpc5xx pati mpl
#########################################################################
## MPC5xxx Systems
#########################################################################
aev_config: unconfig
- @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc
+ @$(MKCONFIG) -a aev powerpc mpc5xxx tqm5200 tqc
BC3450_config: unconfig
- @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
+ @$(MKCONFIG) -a BC3450 powerpc mpc5xxx bc3450
cm5200_config: unconfig
- @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
+ @$(MKCONFIG) -a cm5200 powerpc mpc5xxx cm5200
cpci5200_config: unconfig
- @$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd
+ @$(MKCONFIG) -a cpci5200 powerpc mpc5xxx cpci5200 esd
digsy_mtc_config \
digsy_mtc_LOWBOOT_config \
{ echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \
echo "... with RAMBOOT configuration" ; \
}
- @$(MKCONFIG) -a digsy_mtc ppc mpc5xxx digsy_mtc
+ @$(MKCONFIG) -a digsy_mtc powerpc mpc5xxx digsy_mtc
galaxy5200_LOWBOOT_config \
galaxy5200_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -a galaxy5200 ppc mpc5xxx galaxy5200
+ @$(MKCONFIG) -a galaxy5200 powerpc mpc5xxx galaxy5200
hmi1001_config: unconfig
- @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
+ @$(MKCONFIG) hmi1001 powerpc mpc5xxx hmi1001
Lite5200_config \
Lite5200_LOWBOOT_config \
{ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \
$(XECHO) "... DDR memory revision" ; \
}
- @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
+ @$(MKCONFIG) -a IceCube powerpc mpc5xxx icecube
jupiter_config: unconfig
- @$(MKCONFIG) jupiter ppc mpc5xxx jupiter
+ @$(MKCONFIG) jupiter powerpc mpc5xxx jupiter
inka4x0_config: unconfig
- @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
+ @$(MKCONFIG) inka4x0 powerpc mpc5xxx inka4x0
ipek01_config: unconfig
- @$(MKCONFIG) -a ipek01 ppc mpc5xxx ipek01
+ @$(MKCONFIG) -a ipek01 powerpc mpc5xxx ipek01
lite5200b_config \
lite5200b_PM_config \
{ echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
$(XECHO) "... with LOWBOOT configuration" ; \
}
- @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
+ @$(MKCONFIG) -a IceCube powerpc mpc5xxx icecube
mcc200_config \
mcc200_SDRAM_config \
@[ -z "$(findstring prs200,$@)" ] || \
{ echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\
}
- @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200
+ @$(MKCONFIG) -n $@ -a mcc200 powerpc mpc5xxx mcc200
mecp5200_config: unconfig
- @$(MKCONFIG) mecp5200 ppc mpc5xxx mecp5200 esd
+ @$(MKCONFIG) mecp5200 powerpc mpc5xxx mecp5200 esd
motionpro_config: unconfig
- @$(MKCONFIG) motionpro ppc mpc5xxx motionpro
+ @$(MKCONFIG) motionpro powerpc mpc5xxx motionpro
mucmc52_config: unconfig
- @$(MKCONFIG) mucmc52 ppc mpc5xxx mucmc52
+ @$(MKCONFIG) mucmc52 powerpc mpc5xxx mucmc52
munices_config: unconfig
- @$(MKCONFIG) munices ppc mpc5xxx munices
+ @$(MKCONFIG) munices powerpc mpc5xxx munices
MVBC_P_config: unconfig
@mkdir -p $(obj)include
@ >$(obj)include/config.h
@[ -z "$(findstring MVBC_P,$@)" ] || \
{ echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; }
- @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision
+ @$(MKCONFIG) -n $@ -a MVBC_P powerpc mpc5xxx mvbc_p matrix_vision
MVSMR_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/matrix_vision/mvsmr
- @$(MKCONFIG) $(@:_config=) ppc mpc5xxx mvsmr matrix_vision
+ @$(MKCONFIG) $(@:_config=) powerpc mpc5xxx mvsmr matrix_vision
o2dnt_config: unconfig
- @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
+ @$(MKCONFIG) o2dnt powerpc mpc5xxx o2dnt
pcm030_config \
pcm030_LOWBOOT_config: unconfig
{ echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \
echo "... with LOWBOOT configuration" ; \
}
- @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec
+ @$(MKCONFIG) -a pcm030 powerpc mpc5xxx pcm030 phytec
pf5200_config: unconfig
- @$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esd
+ @$(MKCONFIG) pf5200 powerpc mpc5xxx pf5200 esd
PM520_config \
PM520_DDR_config \
{ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
$(XECHO) "... booting from 8-bit flash" ; \
}
- @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
+ @$(MKCONFIG) -a PM520 powerpc mpc5xxx pm520
smmaco4_config: unconfig
- @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc
+ @$(MKCONFIG) -a smmaco4 powerpc mpc5xxx tqm5200 tqc
spieval_config: unconfig
- @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc
+ @$(MKCONFIG) -a spieval powerpc mpc5xxx tqm5200 tqc
TB5200_B_config \
TB5200_config: unconfig
{ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
$(XECHO) "... with MPC5200B processor" ; \
}
- @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc
+ @$(MKCONFIG) -n $@ -a TB5200 powerpc mpc5xxx tqm5200 tqc
MINI5200_config \
EVAL5200_config \
TOP5200_config: unconfig
@mkdir -p $(obj)include
@ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
+ @$(MKCONFIG) -n $@ -a TOP5200 powerpc mpc5xxx top5200 emk
Total5200_config \
Total5200_lowboot_config \
{ echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \
$(XECHO) "... with lowboot configuration" ; \
}
- @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200
+ @$(MKCONFIG) -a Total5200 powerpc mpc5xxx total5200
cam5200_config \
cam5200_niosflash_config \
@[ -z "$(findstring HIGHBOOT,$@)" ] || \
{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
}
- @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc
+ @$(MKCONFIG) -n $@ -a TQM5200 powerpc mpc5xxx tqm5200 tqc
uc101_config: unconfig
- @$(MKCONFIG) uc101 ppc mpc5xxx uc101
+ @$(MKCONFIG) uc101 powerpc mpc5xxx uc101
v38b_config: unconfig
- @$(MKCONFIG) -a v38b ppc mpc5xxx v38b
+ @$(MKCONFIG) -a v38b powerpc mpc5xxx v38b
#########################################################################
## MPC512x Systems
#########################################################################
aria_config: unconfig
- @$(MKCONFIG) -a aria ppc mpc512x aria davedenx
+ @$(MKCONFIG) -a aria powerpc mpc512x aria davedenx
mecp5123_config: unconfig
- @$(MKCONFIG) -a mecp5123 ppc mpc512x mecp5123 esd
+ @$(MKCONFIG) -a mecp5123 powerpc mpc512x mecp5123 esd
mpc5121ads_config \
mpc5121ads_rev2_config \
@if [ "$(findstring rev2,$@)" ] ; then \
echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
fi
- @$(MKCONFIG) -a mpc5121ads ppc mpc512x mpc5121ads freescale
+ @$(MKCONFIG) -a mpc5121ads powerpc mpc512x mpc5121ads freescale
#########################################################################
## MPC8xx Systems
@mkdir -p $(obj)include
$(if $(findstring AdderII,$@), \
@echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
- @$(MKCONFIG) -a Adder ppc mpc8xx adder
+ @$(MKCONFIG) -a Adder powerpc mpc8xx adder
AdderUSB_config: unconfig
- @$(MKCONFIG) -a AdderUSB ppc mpc8xx adder
+ @$(MKCONFIG) -a AdderUSB powerpc mpc8xx adder
ADS860_config \
FADS823_config \
MPC86xADS_config \
MPC885ADS_config \
FADS860T_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx fads
AMX860_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx amx860 westel
c2mon_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx c2mon
CCM_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx CCM siemens
cogent_mpc8xx_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx cogent
ELPT860_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx elpt860 LEOX
EP88x_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx ep88x
ESTEEM192E_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx esteem192e
ETX094_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx etx094
FLAGADM_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx flagadm
xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
{ echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
$(XECHO) "With reduced H/W feature set (SC)..." ; \
}
- @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
+ @$(MKCONFIG) -a $(call xtract_GEN860T,$@) powerpc mpc8xx gen860t
GENIETV_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx genietv
GTH_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx gth
hermes_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx hermes
HMI10_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx tqm8xx tqc
IAD210_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx IAD210 siemens
xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
{ echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \
$(XECHO) "... with 100MHz system clock" ; \
}
- @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
+ @$(MKCONFIG) -a $(call xtract_ICU862,$@) powerpc mpc8xx icu862
IP860_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx ip860
IVML24_256_config \
IVML24_128_config \
@[ -z "$(findstring IVML24_256_config,$@)" ] || \
{ echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \
}
- @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm
+ @$(MKCONFIG) -a IVML24 powerpc mpc8xx ivm
IVMS8_256_config \
IVMS8_128_config \
@[ -z "$(findstring IVMS8_256_config,$@)" ] || \
{ echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \
}
- @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
+ @$(MKCONFIG) -a IVMS8 powerpc mpc8xx ivm
kmsupx4_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile
KUP4K_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx kup4k kup
KUP4X_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx kup4x kup
LANTEC_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx lantec
lwmon_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx lwmon
MBX_config \
MBX860T_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx mbx8xx
mgsuvd_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile
MHPC_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx mhpc eltec
xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
{ echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
$(XECHO) "... Version 2" ; \
}
- @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
+ @$(MKCONFIG) -a $(call xtract_NETVIA,$@) powerpc mpc8xx netvia
xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
@[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
{ echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
}
- @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
+ @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) powerpc mpc8xx netphone
xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
@[ -n "$(findstring SWAPHOOK_,$@)" ] || \
{ echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
}
- @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta
+ @$(MKCONFIG) -a $(call xtract_NETTA,$@) powerpc mpc8xx netta
xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
@[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
{ echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
}
- @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
+ @$(MKCONFIG) -a $(call xtract_NETTA2,$@) powerpc mpc8xx netta2
NC650_Rev1_config \
NC650_Rev2_config \
@[ -z "$(findstring Rev2,$@)" ] || \
{ echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
}
- @$(MKCONFIG) -a NC650 ppc mpc8xx nc650
+ @$(MKCONFIG) -a NC650 powerpc mpc8xx nc650
NX823_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx nx823
pcu_e_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx pcu_e siemens
QS850_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx qs850 snmc
QS823_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx qs850 snmc
QS860T_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx qs860t snmc
quantum_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx quantum
R360MPI_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx r360mpi
RBC823_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx rbc823
RPXClassic_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx RPXClassic
RPXlite_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx RPXlite
RPXlite_DW_64_config \
RPXlite_DW_LCD_config \
{ echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \
$(XECHO) "... with ENV in NVRAM ..."; \
}
- @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
+ @$(MKCONFIG) -a RPXlite_DW powerpc mpc8xx RPXlite_dw
rmu_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx rmu
RRvision_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx RRvision
RRvision_LCD_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
- @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
+ @$(MKCONFIG) -a RRvision powerpc mpc8xx RRvision
SM850_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx tqm8xx tqc
spc1920_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx spc1920
SPD823TS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx spd8xx
stxxtc_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc stx
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx stxxtc stx
svm_sc8xx_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx svm_sc8xx
SXNI855T_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx sixnet
# EMK MPC8xx based modules
TOP860_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx top860 emk
# Play some tricks for configuration selection
# Only 855 and 860 boards may come with FEC
echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
$(XECHO) "... with LCD display" ; \
}
- @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc
+ @$(MKCONFIG) -a $(call xtract_8xx,$@) powerpc mpc8xx tqm8xx tqc
TTTech_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
- @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
+ @$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc
uc100_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx uc100
v37_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx v37
wtk_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
- @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
+ @$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc
#########################################################################
## PPC4xx Systems
xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
acadia_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx acadia amcc
acadia_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/acadia
@mkdir -p $(obj)nand_spl/board/amcc/acadia
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
+ @$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
ADCIOP_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx adciop esd
alpr_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx alpr prodrive
AP1000_config:unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ap1000 amirix
APC405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx apc405 esd
AR405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ar405 esd
ASH405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ash405 esd
bamboo_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx bamboo amcc
bamboo_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/bamboo
@mkdir -p $(obj)nand_spl/board/amcc/bamboo
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
+ @$(MKCONFIG) -n $@ -a bamboo powerpc ppc4xx bamboo amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
bubinga_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx bubinga amcc
CANBT_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx canbt esd
# Arches, Canyonlands & Glacier use different U-Boot images
arches_config \
@mkdir -p $(obj)include
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
+ @$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc
canyonlands_nand_config \
glacier_nand_config: unconfig
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
+ @$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
{ echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
$(XECHO) "SysClk = 33MHz" ; \
}
- @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
+ @$(MKCONFIG) -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave
CMS700_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cms700 esd
CPCI2DP_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpci2dp esd
CPCI405_config \
CPCI4052_config \
CPCI405DT_config \
CPCI405AB_config: unconfig
@mkdir -p $(obj)board/esd/cpci405
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpci405 esd
CPCIISER4_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpciiser4 esd
CRAYL1_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx L1 cray
csb272_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx csb272
csb472_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx csb472
DASA_SIM_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx dasa_sim esd
dlvision_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx dlvision gdsys
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx dlvision gdsys
DP405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx dp405 esd
DU405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx du405 esd
DU440_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx du440 esd
ebony_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ebony amcc
ERIC_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx eric
fx12mm_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
> $(obj)board/avnet/fx12mm/config.tmp
@echo "TEXT_BASE := 0xFFCB0000" \
>> $(obj)board/avnet/fx12mm/config.tmp
- @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
+ @$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet
fx12mm_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
> $(obj)board/avnet/fx12mm/config.tmp
@echo "TEXT_BASE := 0x03000000" \
>> $(obj)board/avnet/fx12mm/config.tmp
- @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
+ @$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet
G2000_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx g2000
gdppc440etx_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx gdppc440etx gdsys
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx gdppc440etx gdsys
hcu4_config: unconfig
@mkdir -p $(obj)board/netstal/common
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hcu4 netstal
hcu5_config: unconfig
@mkdir -p $(obj)board/netstal/common
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hcu5 netstal
HH405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hh405 esd
HUB405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hub405 esd
# Compact-Center(codename intip) & DevCon-Center use different U-Boot images
intip_config \
@mkdir -p $(obj)include
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a intip ppc ppc4xx intip gdsys
+ @$(MKCONFIG) -n $@ -a intip powerpc ppc4xx intip gdsys
JSE_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx jse
KAREF_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx karef sandburst
katmai_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx katmai amcc
# Kilauea & Haleakala images are identical (recognized via PVR)
kilauea_config \
haleakala_config: unconfig
- @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
+ @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc
kilauea_nand_config \
haleakala_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/kilauea
@mkdir -p $(obj)nand_spl/board/amcc/kilauea
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
+ @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
korat_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx korat
luan_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx luan amcc
lwmon5_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx lwmon5
makalu_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx makalu amcc
mcu25_config: unconfig
@mkdir -p $(obj)board/netstal/common
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx mcu25 netstal
METROBOX_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx metrobox sandburst
MIP405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx mip405 mpl
MIP405T_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MIP405T" >$(obj)include/config.h
@$(XECHO) "Enable subset config for MIP405T"
- @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl
+ @$(MKCONFIG) -a MIP405 powerpc ppc4xx mip405 mpl
ML2_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ml2
ml507_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
> $(obj)board/xilinx/ml507/config.tmp
@echo "TEXT_BASE := 0xFE360000" \
>> $(obj)board/xilinx/ml507/config.tmp
- @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
+ @$(MKCONFIG) ml507 powerpc ppc4xx ml507 xilinx
ml507_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
> $(obj)board/xilinx/ml507/config.tmp
@echo "TEXT_BASE := 0x04000000" \
>> $(obj)board/xilinx/ml507/config.tmp
- @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
+ @$(MKCONFIG) ml507 powerpc ppc4xx ml507 xilinx
neo_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx neo gdsys
ocotea_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ocotea amcc
OCRTC_config \
ORSG_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ocrtc esd
p3p440_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx p3p440 prodrive
PCI405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pci405 esd
pcs440ep_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pcs440ep
PIP405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pip405 mpl
PLU405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx plu405 esd
PMC405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pmc405 esd
PMC405DE_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405de esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pmc405de esd
PMC440_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pmc440 esd
PPChameleonEVB_config \
PPChameleonEVB_BA_25_config \
{ echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
$(XECHO) "SysClk = 33MHz" ; \
}
- @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
+ @$(MKCONFIG) -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave
quad100hd_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx quad100hd
redwood_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx redwood amcc
sbc405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx sbc405
sc3_config:unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx sc3
sequoia_config \
rainier_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
+ @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
sequoia_nand_config \
rainier_nand_config: unconfig
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
+ @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
+ @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
@echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
$(obj)board/amcc/sequoia/config.tmp
taihu_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx taihu amcc
taishan_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx taishan amcc
v5fx30teval_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
> $(obj)board/avnet/v5fx30teval/config.tmp
@echo "TEXT_BASE := 0x03000000" \
>> $(obj)board/avnet/v5fx30teval/config.tmp
- @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
+ @$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet
v5fx30teval_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
> $(obj)board/avnet/v5fx30teval/config.tmp
@echo "TEXT_BASE := 0xFF1C0000" \
>> $(obj)board/avnet/v5fx30teval/config.tmp
- @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
+ @$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet
VOH405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx voh405 esd
VOM405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx vom405 esd
W7OLMC_config \
W7OLMG_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx w7o
# Walnut & Sycamore images are identical (recognized via PVR)
walnut_config \
sycamore_config: unconfig
- @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc
+ @$(MKCONFIG) -n $@ -a walnut powerpc ppc4xx walnut amcc
WUH405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx wuh405 esd
xilinx-ppc405-generic_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
> $(obj)board/xilinx/ppc405-generic/config.tmp
@echo "TEXT_BASE := 0xFE360000" \
>> $(obj)board/xilinx/ppc405-generic/config.tmp
- @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
+ @$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx
xilinx-ppc405-generic_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
> $(obj)board/xilinx/ppc405-generic/config.tmp
@echo "TEXT_BASE := 0x04000000" \
>> $(obj)board/xilinx/ppc405-generic/config.tmp
- @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
+ @$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx
xilinx-ppc440-generic_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
> $(obj)board/xilinx/ppc440-generic/config.tmp
@echo "TEXT_BASE := 0xFE360000" \
>> $(obj)board/xilinx/ppc440-generic/config.tmp
- @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
+ @$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx
xilinx-ppc440-generic_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
> $(obj)board/xilinx/ppc440-generic/config.tmp
@echo "TEXT_BASE := 0x04000000" \
>> $(obj)board/xilinx/ppc440-generic/config.tmp
- @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
+ @$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx
XPEDITE1000_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1000 xes
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx xpedite1000 xes
yosemite_config \
yellowstone_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc
+ @$(MKCONFIG) -n $@ -a yosemite powerpc ppc4xx yosemite amcc
yucca_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx yucca amcc
zeus_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx zeus
#########################################################################
## MPC8220 Systems
Alaska8220_config \
Yukon8220_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8220 alaska
sorcery_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8220 sorcery
#########################################################################
## MPC824x Systems
xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
A3000_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x a3000
barco_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x barco
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x barco
BMW_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x bmw
CPC45_config \
CPC45_ROMBOOT_config: unconfig
- @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45
+ @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc824x cpc45
@cd $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
echo "export CONFIG_BOOT_ROM" >> config.mk;
CU824_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x cu824
debris_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x debris etin
eXalion_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x eXalion
HIDDEN_DRAGON_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x hidden_dragon
kvme080_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x kvme080 etin
# HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
# time permits.
*HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \
*HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \
esac
- @$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation
+ @$(MKCONFIG) -n $@ -a linkstation powerpc mpc824x linkstation
MOUSSE_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x mousse
MUSENKI_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x musenki
MVBLUE_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x mvblue
OXC_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x oxc
PN62_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x pn62
Sandpoint8240_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x sandpoint
Sandpoint8245_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x sandpoint
sbc8240_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x sbc8240
utx8245_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x utx8245
#########################################################################
## MPC8260 Systems
#########################################################################
atc_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 atc
cogent_mpc8260_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 cogent
CPU86_config \
CPU86_ROMBOOT_config: unconfig
- @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86
+ @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc8260 cpu86
@cd $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
CPU87_config \
CPU87_ROMBOOT_config: unconfig
- @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87
+ @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc8260 cpu87
@cd $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
ep8248_config \
ep8248E_config : unconfig
- @$(MKCONFIG) ep8248 ppc mpc8260 ep8248
+ @$(MKCONFIG) ep8248 powerpc mpc8260 ep8248
ep8260_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ep8260
ep82xxm_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ep82xxm
gw8260_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 gw8260
hymod_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 hymod
IDS8247_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ids8247
IPHASE4539_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 iphase4539
ISPAN_config \
ISPAN_REVB_config: unconfig
@if [ "$(findstring _REVB_,$@)" ] ; then \
echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
fi
- @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
+ @$(MKCONFIG) -a ISPAN powerpc mpc8260 ispan
mgcoge_config : unconfig
- @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile
+ @$(MKCONFIG) mgcoge powerpc mpc8260 mgcoge keymile
MPC8260ADS_config \
MPC8260ADS_lowboot_config \
{ echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \
$(XECHO) "... with lowboot configuration" ; \
}
- @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale
+ @$(MKCONFIG) -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale
MPC8266ADS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 mpc8266ads freescale
muas3001_dev_config \
muas3001_config : unconfig
@if [ "$(findstring dev,$@)" ] ; then \
echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \
fi
- @$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001
+ @$(MKCONFIG) -a muas3001 powerpc mpc8260 muas3001
# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash
PM825_config \
echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
fi; \
fi
- @$(MKCONFIG) -a PM826 ppc mpc8260 pm826
+ @$(MKCONFIG) -a PM826 powerpc mpc8260 pm826
PM828_config \
PM828_PCI_config \
echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
fi
- @$(MKCONFIG) -a PM828 ppc mpc8260 pm828
+ @$(MKCONFIG) -a PM828 powerpc mpc8260 pm828
ppmc8260_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ppmc8260
Rattler8248_config \
Rattler_config: unconfig
@mkdir -p $(obj)include
$(if $(findstring 8248,$@), \
@echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
- @$(MKCONFIG) -a Rattler ppc mpc8260 rattler
+ @$(MKCONFIG) -a Rattler powerpc mpc8260 rattler
RPXsuper_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 rpxsuper
rsdproto_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 rsdproto
sacsng_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 sacsng
sbc8260_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 sbc8260
SCM_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 SCM siemens
TQM8255_AA_config \
TQM8260_AA_config \
echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
$(XECHO) "... without 60x Bus Mode" ; \
fi
- @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc
+ @$(MKCONFIG) -a TQM8260 powerpc mpc8260 tqm8260 tqc
TQM8272_config: unconfig
- @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc
+ @$(MKCONFIG) TQM8272 powerpc mpc8260 tqm8272 tqc
VoVPN-GW_66MHz_config \
VoVPN-GW_100MHz_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
- @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
+ @$(MKCONFIG) -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk
ZPC1900_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 zpc1900
#########################################################################
## Coldfire
#########################################################################
kmeter1_config: unconfig
- @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile
+ @$(MKCONFIG) kmeter1 powerpc mpc83xx kmeter1 keymile
MPC8313ERDB_33_config \
MPC8313ERDB_66_config \
echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
+ @$(MKCONFIG) -a MPC8313ERDB powerpc mpc83xx mpc8313erdb freescale
@if [ "$(findstring _NAND_,$@)" ] ; then \
echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
fi ;
MPC8315ERDB_NAND_config \
MPC8315ERDB_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
+ @$(MKCONFIG) -t $(@:_config=) MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale
MPC8323ERDB_config: unconfig
- @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
+ @$(MKCONFIG) -a MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale
MPC832XEMDS_config \
MPC832XEMDS_HOST_33_config \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
+ @$(MKCONFIG) -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale
MPC8349EMDS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale
+ @$(MKCONFIG) $(@:_config=) powerpc mpc83xx mpc8349emds freescale
MPC8349ITX_config \
MPC8349ITX_LOWBOOT_config \
@if [ "$(findstring LOWBOOT,$@)" ] ; then \
echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
fi
- @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale
+ @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX powerpc mpc83xx mpc8349itx freescale
MPC8360EMDS_config \
MPC8360EMDS_HOST_33_config \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
+ @$(MKCONFIG) -a MPC8360EMDS powerpc mpc83xx mpc8360emds freescale
MPC8360ERDK_33_config \
MPC8360ERDK_66_config \
$(XECHO) -n "... CLKIN 33MHz " ; \
echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
fi ;
- @$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale
+ @$(MKCONFIG) -a MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale
MPC837XEMDS_config \
MPC837XEMDS_HOST_config: unconfig
$(XECHO) -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale
+ @$(MKCONFIG) -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale
MPC837XERDB_config: unconfig
- @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale
+ @$(MKCONFIG) -a MPC837XERDB powerpc mpc83xx mpc837xerdb freescale
MVBLM7_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision
+ @$(MKCONFIG) $(@:_config=) powerpc mpc83xx mvblm7 matrix_vision
sbc8349_config \
sbc8349_PCI_33_config \
sbc8349_PCI_66_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) sbc8349 ppc mpc83xx sbc8349
+ @$(MKCONFIG) -t $(@:_config=) sbc8349 powerpc mpc83xx sbc8349
SIMPC8313_LP_config \
SIMPC8313_SP_config: unconfig
$(XECHO) -n "...Small Page NAND..." ; \
echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon
+ @$(MKCONFIG) -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
TQM834x_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
+ @$(MKCONFIG) $(@:_config=) powerpc mpc83xx tqm834x tqc
caddy2_config \
vme8349_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) vme8349 ppc mpc83xx vme8349 esd
+ @$(MKCONFIG) -t $(@:_config=) vme8349 powerpc mpc83xx vme8349 esd
edb9301_config \
edb9302_config \
#########################################################################
ATUM8548_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx atum8548
MPC8536DS_NAND_config \
MPC8536DS_SDCARD_config \
MPC8536DS_SPIFLASH_config \
MPC8536DS_36BIT_config \
MPC8536DS_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) MPC8536DS ppc mpc85xx mpc8536ds freescale
+ @$(MKCONFIG) -t $(@:_config=) MPC8536DS powerpc mpc85xx mpc8536ds freescale
MPC8540ADS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8540ads freescale
MPC8540EVAL_config \
MPC8540EVAL_33_config \
else \
$(XECHO) " host" ; \
fi
- @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
+ @$(MKCONFIG) -a MPC8540EVAL powerpc mpc85xx mpc8540eval
MPC8560ADS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8560ads freescale
MPC8541CDS_legacy_config \
MPC8541CDS_config: unconfig
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
$(XECHO) "... legacy" ; \
fi
- @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale
+ @$(MKCONFIG) -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale
MPC8544DS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8544ds freescale
MPC8548CDS_legacy_config \
MPC8548CDS_config: unconfig
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
$(XECHO) "... legacy" ; \
fi
- @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale
+ @$(MKCONFIG) -a MPC8548CDS powerpc mpc85xx mpc8548cds freescale
MPC8555CDS_legacy_config \
MPC8555CDS_config: unconfig
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
$(XECHO) "... legacy" ; \
fi
- @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale
+ @$(MKCONFIG) -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale
MPC8568MDS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8568mds freescale
MPC8569MDS_ATM_config \
MPC8569MDS_NAND_config \
MPC8569MDS_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) MPC8569MDS ppc mpc85xx mpc8569mds freescale
+ @$(MKCONFIG) -t $(@:_config=) MPC8569MDS powerpc mpc85xx mpc8569mds freescale
MPC8572DS_36BIT_config \
MPC8572DS_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) MPC8572DS ppc mpc85xx mpc8572ds freescale
+ @$(MKCONFIG) -t $(@:_config=) MPC8572DS powerpc mpc85xx mpc8572ds freescale
P2020DS_36BIT_config \
P2020DS_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) P2020DS ppc mpc85xx p2020ds freescale
+ @$(MKCONFIG) -t $(@:_config=) P2020DS powerpc mpc85xx p2020ds freescale
P1011RDB_config \
P1011RDB_NAND_config \
P2020RDB_NAND_config \
P2020RDB_SDCARD_config \
P2020RDB_SPIFLASH_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale
+ @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale
PM854_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx pm854
PM856_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx pm856
sbc8540_config \
sbc8540_33_config \
sbc8540_66_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) SBC8540 ppc mpc85xx sbc8560
+ @$(MKCONFIG) -t $(@:_config=) SBC8540 powerpc mpc85xx sbc8560
sbc8548_config \
sbc8548_PCI_33_config \
sbc8548_PCI_66_config \
sbc8548_PCI_33_PCIE_config \
sbc8548_PCI_66_PCIE_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) sbc8548 ppc mpc85xx sbc8548
+ @$(MKCONFIG) -t $(@:_config=) sbc8548 powerpc mpc85xx sbc8548
sbc8560_config \
sbc8560_33_config \
sbc8560_66_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) sbc8560 ppc mpc85xx sbc8560
+ @$(MKCONFIG) -t $(@:_config=) sbc8560 powerpc mpc85xx sbc8560
socrates_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx socrates
stxgp3_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 stx
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx stxgp3 stx
stxssa_config \
stxssa_4M_config: unconfig
echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
$(XECHO) "... with 4 MiB flash memory" ; \
fi
- @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa stx
+ @$(MKCONFIG) -a stxssa powerpc mpc85xx stxssa stx
TQM8540_config \
TQM8541_config \
echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
- @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
+ @$(MKCONFIG) -a TQM85xx powerpc mpc85xx tqm85xx tqc
@echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
XPEDITE5200_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx xpedite5200 xes
XPEDITE5370_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx xpedite5370 xes
#########################################################################
## MPC86xx Systems
#########################################################################
MPC8610HPCD_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
+ @$(MKCONFIG) $(@:_config=) powerpc mpc86xx mpc8610hpcd freescale
MPC8641HPCN_36BIT_config \
MPC8641HPCN_config: unconfig
echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
$(XECHO) "... enabling 36-bit physical addressing." ; \
fi
- @$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale
+ @$(MKCONFIG) -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale
sbc8641d_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
+ @$(MKCONFIG) $(@:_config=) powerpc mpc86xx sbc8641d
XPEDITE5170_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc86xx xpedite5170 xes
+ @$(MKCONFIG) $(@:_config=) powerpc mpc86xx xpedite5170 xes
#########################################################################
## 74xx/7xx Systems
#########################################################################
AmigaOneG3SE_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
+ @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx AmigaOneG3SE MAI
BAB7xx_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
+ @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx bab7xx eltec
CPCI750_config: unconfig
- @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
+ @$(MKCONFIG) CPCI750 powerpc 74xx_7xx cpci750 esd
DB64360_config: unconfig
- @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
+ @$(MKCONFIG) DB64360 powerpc 74xx_7xx db64360 Marvell
DB64460_config: unconfig
- @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
+ @$(MKCONFIG) DB64460 powerpc 74xx_7xx db64460 Marvell
ELPPC_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec
+ @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx elppc eltec
EVB64260_config \
EVB64260_750CX_config: unconfig
- @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
+ @$(MKCONFIG) EVB64260 powerpc 74xx_7xx evb64260
mpc7448hpc2_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale
+ @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx mpc7448hpc2 freescale
P3G4_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
+ @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx evb64260
p3m750_config \
p3m7448_config: unconfig
else \
echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
fi
- @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive
+ @$(MKCONFIG) -a p3mx powerpc 74xx_7xx p3mx prodrive
PCIPPC2_config \
PCIPPC6_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
+ @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx pcippc2
ppmc7xx_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx
+ @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx ppmc7xx
ZUMA_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
+ @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx evb64260
#========================================================================
# ARM
@rm -f $(obj)u-boot.kwb
@rm -f $(obj)u-boot.imx
@rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
- @rm -f $(obj)arch/ppc/cpu/mpc824x/bedbug_603e.c
+ @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
@rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
@[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
/nios2 Files generic to Altera NIOS2 architecture
/cpu CPU specific files
/lib Architecture specific library files
- /ppc Files generic to PowerPC architecture
+ /powerpc Files generic to PowerPC architecture
/cpu CPU specific files
/74xx_7xx Files specific to Freescale MPC74xx and 7xx CPUs
/mpc5xx Files specific to Freescale MPC5xx CPUs
the CPU's i2c node address).
Now, the u-boot i2c code for the mpc8xx
- (arch/ppc/cpu/mpc8xx/i2c.c) sets the CPU up as a master node
+ (arch/powerpc/cpu/mpc8xx/i2c.c) sets the CPU up as a master node
and so its address should therefore be cleared to 0 (See,
eg, MPC823e User's Manual p.16-473). So, set
CONFIG_SYS_I2C_SLAVE to 0.
15 arch/<arch>/lib/bootm.c All preparation done, transferring control to OS
- -30 arch/ppc/lib/board.c Fatal error, hang the system
+ -30 arch/powerpc/lib/board.c Fatal error, hang the system
-31 post/post.c POST test failed, detected by post_output_backlog()
-32 post/post.c POST test failed, detected by post_run_single()
CONFIG_SYS_PCI_MSTR_MEMIO_SIZE, CONFIG_SYS_POCMR1_MASK_ATTRIB, CONFIG_SYS_PCI_MSTR_IO_LOCAL,
CONFIG_SYS_PCI_MSTR_IO_BUS, CONFIG_SYS_CPU_PCI_IO_START, CONFIG_SYS_PCI_MSTR_IO_SIZE,
CONFIG_SYS_POCMR2_MASK_ATTRIB: (MPC826x only)
- Overrides the default PCI memory map in arch/ppc/cpu/mpc8260/pci.c if set.
+ Overrides the default PCI memory map in arch/powerpc/cpu/mpc8260/pci.c if set.
- CONFIG_PCI_DISABLE_PCIE:
Disable PCI-Express on systems where it is supported but not
(no, we don't intend to provide a full virtual machine interface to
Linux :-).
-But now you can ignore ALL boot loader code (in arch/ppc/mbxboot).
+But now you can ignore ALL boot loader code (in arch/powerpc/mbxboot).
Just make sure your machine specific header file (for instance
include/asm-ppc/tqm8xx.h) includes the same definition of the Board
-> tools/mkimage -n '2.4.4 kernel for TQM850L' \
> -A ppc -O linux -T kernel -C gzip -a 0 -e 0 \
- > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/ppc/coffboot/vmlinux.gz \
+ > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz \
> examples/uImage.TQM850L
Image Name: 2.4.4 kernel for TQM850L
Created: Wed Jul 19 02:34:59 2000
needs more space in Flash, but boots much faster since it does not
need to be uncompressed:
- -> gunzip /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/ppc/coffboot/vmlinux.gz
+ -> gunzip /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz
-> tools/mkimage -n '2.4.4 kernel for TQM850L' \
> -A ppc -O linux -T kernel -C none -a 0 -e 0 \
- > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/ppc/coffboot/vmlinux \
+ > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux \
> examples/uImage.TQM850L-uncompressed
Image Name: 2.4.4 kernel for TQM850L
Created: Wed Jul 19 02:34:59 2000
/*
- * linux/arch/ppc/kernel/traps.c
+ * linux/arch/powerpc/kernel/traps.c
*
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
/*
- * needed for arch/ppc/cpu/mpc512x/start.S
+ * needed for arch/powerpc/cpu/mpc512x/start.S
*
* These should be auto-generated
*/
# Use default linker script.
# A board port can override this setting in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc512x/u-boot.lds
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc512x/u-boot.lds
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc512x/start.o (.text)
+ arch/powerpc/cpu/mpc512x/start.o (.text)
*(.text)
*(.got1)
. = ALIGN(16);
#
#
-# File: arch/ppc/cpu/mpc5xx/Makefile
+# File: arch/powerpc/cpu/mpc5xx/Makefile
#
# Discription: Makefile to build mpc5xx cpu configuration.
# Will include top config.mk which itselfs
-# uses the definitions made in arch/ppc/cpu/mpc5xx/config.mk
+# uses the definitions made in arch/powerpc/cpu/mpc5xx/config.mk
#
PLATFORM_CPPFLAGS += -DCONFIG_5xx -ffixed-r2 -mpowerpc -msoft-float
# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc5xx/u-boot.lds
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xx/u-boot.lds
/*
- * linux/arch/ppc/kernel/traps.c
+ * linux/arch/powerpc/kernel/traps.c
*
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc5xx/start.o (.text)
+ arch/powerpc/cpu/mpc5xx/start.o (.text)
*(.text)
*(.got1)
-mstring -mcpu=603e -mmultiple
# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc5xxx/u-boot.lds
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xxx/u-boot.lds
* MA 02111-1307 USA
*/
-/* this section was ripped out of arch/ppc/syslib/mpc52xx_pic.c in the
+/* this section was ripped out of arch/powerpc/syslib/mpc52xx_pic.c in the
* Linux 2.6 source with the following copyright.
*
* Based on (well, mostly copied from) the code from the 2.4 kernel by
* MA 02111-1307 USA
*
* Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00, with
- * changes based on the file arch/ppc/mbxboot/m8260_tty.c from the
+ * changes based on the file arch/powerpc/mbxboot/m8260_tty.c from the
* Linux/PPC sources (m8260_tty.c had no copyright info in it).
*
* Martin Krause, 8 Jun 2006
/* */
/* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000 */
/* incrementing by 0x1000 each time. The code below is sort of */
- /* based on code in "flush_tlbs" from arch/ppc/kernel/head.S */
+ /* based on code in "flush_tlbs" from arch/powerpc/kernel/head.S */
/* */
/*--------------------------------------------------------------*/
/*
- * linux/arch/ppc/kernel/traps.c
+ * linux/arch/powerpc/kernel/traps.c
*
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc5xxx/start.o (.text)
- arch/ppc/cpu/mpc5xxx/traps.o (.text)
+ arch/powerpc/cpu/mpc5xxx/start.o (.text)
+ arch/powerpc/cpu/mpc5xxx/traps.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.ppcenv)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc5xxx/start.o (.text)
+ arch/powerpc/cpu/mpc5xxx/start.o (.text)
*(.text)
*(.got1)
. = ALIGN(16);
-mstring -mcpu=603e -mmultiple
# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc8220/u-boot.lds
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc8220/u-boot.lds
/* */
/* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000 */
/* incrementing by 0x1000 each time. The code below is sort of */
- /* based on code in "flush_tlbs" from arch/ppc/kernel/head.S */
+ /* based on code in "flush_tlbs" from arch/powerpc/kernel/head.S */
/* */
/*--------------------------------------------------------------*/
/*
- * linux/arch/ppc/kernel/traps.c
+ * linux/arch/powerpc/kernel/traps.c
*
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8220/start.o (.text)
+ arch/powerpc/cpu/mpc8220/start.o (.text)
*(.text)
*(.got1)
. = ALIGN(16);
PLATFORM_CPPFLAGS += -DCONFIG_MPC824X -ffixed-r2 -mstring -mcpu=603e -msoft-float
# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc824x/u-boot.lds
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc824x/u-boot.lds
/*
- * arch/ppc/kernel/mpc10x_common.c
+ * arch/powerpc/kernel/mpc10x_common.c
*
* Common routines for the Motorola SPS MPC106, MPC107 and MPC8240 Host bridge,
* Mem ctlr, EPIC, etc.
/*
- * linux/arch/ppc/kernel/traps.c
+ * linux/arch/powerpc/kernel/traps.c
*
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8260/start.o (.text)
+ arch/powerpc/cpu/mpc824x/start.o (.text)
*(.text)
*(.got1)
. = ALIGN(16);
/*
- * This file is based on "arch/ppc/8260_io/commproc.c" - here is it's
+ * This file is based on "arch/powerpc/8260_io/commproc.c" - here is it's
* copyright notice:
*
* General Purpose functions for the global management of the
-mstring -mcpu=603e -mmultiple
# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc8260/u-boot.lds
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc8260/u-boot.lds
static ulong ppc_cached_irq_mask[NR_MASK_WORDS];
/****************************************************************************/
-/* this section was ripped out of arch/ppc/kernel/ppc8260_pic.c in the */
+/* this section was ripped out of arch/powerpc/kernel/ppc8260_pic.c in the */
/* Linux/PPC 2.4.x source. There was no copyright notice in that file. */
/* The 8260 internal interrupt controller. It is usually
return irq;
}
-/* end of code ripped out of arch/ppc/kernel/ppc8260_pic.c */
+/* end of code ripped out of arch/powerpc/kernel/ppc8260_pic.c */
/****************************************************************************/
int interrupt_init_cpu (unsigned *decrementer_count)
* MA 02111-1307 USA
*
* Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00, with
- * changes based on the file arch/ppc/mbxboot/m8260_tty.c from the
+ * changes based on the file arch/powerpc/mbxboot/m8260_tty.c from the
* Linux/PPC sources (m8260_tty.c had no copyright info in it).
*/
/* */
/* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000 */
/* incrementing by 0x1000 each time. The code below is sort of */
- /* based on code in "flush_tlbs" from arch/ppc/kernel/head.S */
+ /* based on code in "flush_tlbs" from arch/powerpc/kernel/head.S */
/* */
/*--------------------------------------------------------------*/
/*
- * linux/arch/ppc/kernel/traps.c
+ * linux/arch/powerpc/kernel/traps.c
*
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc824x/start.o (.text)
+ arch/powerpc/cpu/mpc8260/start.o (.text)
*(.text)
*(.got1)
. = ALIGN(16);
-ffixed-r2 -msoft-float
# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc83xx/u-boot.lds
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc83xx/u-boot.lds
*
* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000
* incrementing by 0x1000 each time. The code below is sort of
- * based on code in "flush_tlbs" from arch/ppc/kernel/head.S
+ * based on code in "flush_tlbs" from arch/powerpc/kernel/head.S
*
*/
lis r3, 0
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc83xx/start.o (.text)
+ arch/powerpc/cpu/mpc83xx/start.o (.text)
*(.text)
*(.got1)
. = ALIGN(16);
* Adapted for Motorola MPC8560 chips
* Xianghua Xiao <x.xiao@motorola.com>
*
- * This file is based on "arch/ppc/8260_io/commproc.c" - here is it's
+ * This file is based on "arch/powerpc/8260_io/commproc.c" - here is it's
* copyright notice:
*
* General Purpose functions for the global management of the
PLATFORM_CPPFLAGS +=$(call cc-option,-mno-spe)
# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc85xx/u-boot.lds
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc85xx/u-boot.lds
/*
- * linux/arch/ppc/kernel/traps.c
+ * linux/arch/powerpc/kernel/traps.c
*
* Copyright 2007 Freescale Semiconductor.
* Copyright (C) 2003 Motorola
.bootpg ADDR(.text) - 0x1000 :
{
- arch/ppc/cpu/mpc85xx/start.o (.bootpg)
+ arch/powerpc/cpu/mpc85xx/start.o (.bootpg)
} :text = 0xffff
. = ADDR(.text) + 0x80000;
. = 0xfff00000;
.text : {
*(.text)
- }
+ }
_etext = .;
.reloc : {
.bootpg RESET_VECTOR_ADDRESS - 0xffc :
{
- arch/ppc/cpu/mpc85xx/start.o (.bootpg)
+ arch/powerpc/cpu/mpc85xx/start.o (.bootpg)
} :text = 0xffff
.resetvec RESET_VECTOR_ADDRESS :
/*
- * linux/arch/ppc/kernel/traps.c
+ * linux/arch/powerpc/kernel/traps.c
*
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
/*
* Copyright 2009-2010 Freescale Semiconductor, Inc.
*
- * This file is derived from arch/ppc/cpu/mpc85xx/cpu.c and
- * arch/ppc/cpu/mpc86xx/cpu.c. Basically this file contains
+ * This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and
+ * arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains
* cpu specific common code for 85xx/86xx processors.
* See file CREDITS for list of people who contributed to this
* project.
/*
* Copyright 2009 Freescale Semiconductor, Inc.
*
- * This file is derived from arch/ppc/cpu/mpc85xx/cpu.c and
- * arch/ppc/cpu/mpc86xx/cpu.c. Basically this file contains
+ * This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and
+ * arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains
* cpu specific common code for 85xx/86xx processors.
* See file CREDITS for list of people who contributed to this
* project.
/*
- * arch/ppc/cpu/ppc4xx/40x_spd_sdram.c
+ * arch/powerpc/cpu/ppc4xx/40x_spd_sdram.c
* This SPD SDRAM detection code supports IBM/AMCC PPC44x cpu with a
* SDRAM controller. Those are all current 405 PPC's.
*
/*
- * arch/ppc/cpu/ppc4xx/44x_spd_ddr.c
+ * arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c
* This SPD DDR detection code supports IBM/AMCC PPC44x cpu with a
* DDR controller. Those are 440GP/GX/EP/GR.
*
/*
- * arch/ppc/cpu/ppc4xx/44x_spd_ddr2.c
+ * arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
* This SPD SDRAM detection code supports AMCC PPC44x cpu's with a
* DDR2 controller (non Denali Core). Those currently are:
*
/*
- * arch/ppc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
+ * arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
* This SPD SDRAM detection code supports AMCC PPC44x cpu's with a
* DDR2 controller (non Denali Core). Those currently are:
*
endif
# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/ppc4xx/u-boot.lds
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/ppc4xx/u-boot.lds
/*
- * arch/ppc/cpu/ppc4xx/denali_data_eye.c
+ * arch/powerpc/cpu/ppc4xx/denali_data_eye.c
* Extracted from board/amcc/sequoia/sdram.c by Larry Johnson <lrj@acm.org>.
*
* (C) Copyright 2006
/*
- * arch/ppc/cpu/ppc4xx/denali_spd_ddr2.c
+ * arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c
* This SPD SDRAM detection code supports AMCC PPC44x CPUs with a Denali-core
* DDR2 controller, specifically the 440EPx/GRx.
*
* (C) Copyright 2007-2008
* Larry Johnson, lrj@acm.org.
*
- * Based primarily on arch/ppc/cpu/ppc4xx/4xx_spd_ddr2.c, which is...
+ * Based primarily on arch/powerpc/cpu/ppc4xx/4xx_spd_ddr2.c, which is...
*
* (C) Copyright 2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
/*
- * linux/arch/ppc/kernel/traps.c
+ * linux/arch/powerpc/kernel/traps.c
*
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
#ifdef CONFIG_440
.bootpg RESET_VECTOR_ADDRESS - 0xffc :
{
- arch/ppc/cpu/ppc4xx/start.o (.bootpg)
+ arch/powerpc/cpu/ppc4xx/start.o (.bootpg)
/*
* PPC440 board need a board specific object with the
* that the overall structure is a multiple of 16 bytes in length.
*
* Note that the offsets of the fields in this struct correspond with
- * the PT_* values below. This simplifies arch/ppc/kernel/ptrace.c.
+ * the PT_* values below. This simplifies arch/powerpc/kernel/ptrace.c.
*/
#include <linux/config.h>
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
lib/string.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/extable.o (.text)
- arch/ppc/lib/time.o (.text)
- arch/ppc/lib/ticks.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/extable.o (.text)
+ arch/powerpc/lib/time.o (.text)
+ arch/powerpc/lib/ticks.o (.text)
. = env_offset;
common/env_embedded.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
common/env_embedded.o(.text)
/*
* COM1 NS16550 support
- * originally from linux source (arch/ppc/boot/ns16550.c)
+ * originally from linux source (arch/powerpc/boot/ns16550.c)
* modified to use CONFIG_SYS_ISA_MEM and new defines
*
* further modified by Josh Huber <huber@mclx.com> to support
/*
* NS16550 Serial Port
- * originally from linux source (arch/ppc/boot/ns16550.h)
+ * originally from linux source (arch/powerpc/boot/ns16550.h)
* modified slightly to
* have addresses as offsets from CONFIG_SYS_ISA_BASE
* added a few more definitions
*************************************************************************/
/*
* based on Linux code
- * arch/ppc/galileo/EVB64360/mv64360_eth.c - Driver for MV64360X ethernet ports
+ * arch/powerpc/galileo/EVB64360/mv64360_eth.c - Driver for MV64360X ethernet ports
* Copyright (C) 2002 rabeeh@galileo.co.il
* This program is free software; you can redistribute it and/or
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
*************************************************************************/
/*
* based on Linux code
- * arch/ppc/galileo/EVB64460/mv64460_eth.c - Driver for MV64460X ethernet ports
+ * arch/powerpc/galileo/EVB64460/mv64460_eth.c - Driver for MV64460X ethernet ports
* Copyright (C) 2002 rabeeh@galileo.co.il
* This program is free software; you can redistribute it and/or
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = env_offset;
common/env_embedded.o (.ppcenv)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
*(.text)
*(.got1)
. = ALIGN(16);
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
/* Align to next NAND block */
. = ALIGN(0x4000);
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
/* Align to next NAND block */
. = ALIGN(0x4000);
#define BOARD_ARCHES 4
/*
- * Override the default functions in arch/ppc/cpu/ppc4xx/44x_spd_ddr2.c with
+ * Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with
* board specific values.
*/
#if defined(CONFIG_ARCHES)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
/* Align to next NAND block */
. = ALIGN(0x20000);
}
/*
- * Override the default functions in arch/ppc/cpu/ppc4xx/44x_spd_ddr2.c with
+ * Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with
* board specific values.
*/
u32 ddr_wrdtr(u32 default_val) {
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
/* Align to next NAND block */
. = ALIGN(0x4000);
}
/*
- * Override the default functions in arch/ppc/cpu/ppc4xx/44x_spd_ddr2.c with
+ * Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with
* board specific values.
*/
u32 ddr_clktr(u32 default_val) {
extern void denali_core_search_data_eye(void);
#if defined(CONFIG_NAND_SPL)
-/* Using arch/ppc/cpu/ppc4xx/speed.c to calculate the bus frequency is too big
+/* Using arch/powerpc/cpu/ppc4xx/speed.c to calculate the bus frequency is too big
* for the 4k NAND boot image so define bus_frequency to 133MHz here
* which is save for the refresh counter setup.
*/
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
/* Align to next NAND block */
. = ALIGN(0x4000);
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
*(.text)
*(.got1)
}
/*
- * Override the default functions in arch/ppc/cpu/ppc4xx/44x_spd_ddr2.c with
+ * Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with
* board specific values.
*/
static int ppc440spe_rev_a(void)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
board/amirix/ap1000/init.o (.text)
- arch/ppc/cpu/ppc4xx/kgdb.o (.text)
- arch/ppc/cpu/ppc4xx/traps.o (.text)
- arch/ppc/cpu/ppc4xx/interrupts.o (.text)
- arch/ppc/cpu/ppc4xx/4xx_uart.o (.text)
- arch/ppc/cpu/ppc4xx/cpu_init.o (.text)
- arch/ppc/cpu/ppc4xx/speed.o (.text)
+ arch/powerpc/cpu/ppc4xx/kgdb.o (.text)
+ arch/powerpc/cpu/ppc4xx/traps.o (.text)
+ arch/powerpc/cpu/ppc4xx/interrupts.o (.text)
+ arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text)
+ arch/powerpc/cpu/ppc4xx/cpu_init.o (.text)
+ arch/powerpc/cpu/ppc4xx/speed.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
lib/zlib.o (.text)
/* . = env_offset;*/
/*
* COM1 NS16550 support
- * originally from linux source (arch/ppc/boot/ns16550.c)
+ * originally from linux source (arch/powerpc/boot/ns16550.c)
* modified to use CONFIG_SYS_ISA_MEM and new defines
*/
/*
* NS16550 Serial Port
- * originally from linux source (arch/ppc/boot/ns16550.h)
+ * originally from linux source (arch/powerpc/boot/ns16550.h)
* modified slightly to
* have addresses as offsets from CONFIG_SYS_ISA_BASE
* added a few more definitions
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc5xxx/start.o (.text)
+ arch/powerpc/cpu/mpc5xxx/start.o (.text)
*(.text)
*(.got1)
. = ALIGN(16);
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
common/env_embedded.o(.text)
/*
* ToDo: Move the asm init routine sdram_init() to this C file,
* or even better use some common ppc4xx code available
- * in arch/ppc/cpu/ppc4xx
+ * in arch/powerpc/cpu/ppc4xx
*/
sdram_init();
/*
* ToDo: Move the asm init routine sdram_init() to this C file,
* or even better use some common ppc4xx code available
- * in arch/ppc/cpu/ppc4xx
+ * in arch/powerpc/cpu/ppc4xx
*/
sdram_init();
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/env_embedded.o(.text)
*(.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
*(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
. = env_offset;
common/env_embedded.o(.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
*(.text)
*(.got1)
. = ALIGN(16);
/*
* ToDo: Move the asm init routine sdram_init() to this C file,
* or even better use some common ppc4xx code available
- * in arch/ppc/cpu/ppc4xx
+ * in arch/powerpc/cpu/ppc4xx
*/
sdram_init();
*************************************************************************/
/*
* based on Linux code
- * arch/ppc/galileo/EVB64360/mv64360_eth.c - Driver for MV64360X ethernet ports
+ * arch/powerpc/galileo/EVB64360/mv64360_eth.c - Driver for MV64360X ethernet ports
* Copyright (C) 2002 rabeeh@galileo.co.il
* This program is free software; you can redistribute it and/or
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
. = env_offset;
common/env_embedded.o(.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
/* Align to next NAND block */
. = ALIGN(0x4000);
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
- arch/ppc/cpu/mpc8xx/interrupts.o (.text)
- arch/ppc/cpu/mpc8xx/serial.o (.text)
- arch/ppc/cpu/mpc8xx/cpu_init.o (.text)
- arch/ppc/cpu/mpc8xx/speed.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
+ arch/powerpc/cpu/mpc8xx/serial.o (.text)
+ arch/powerpc/cpu/mpc8xx/cpu_init.o (.text)
+ arch/powerpc/cpu/mpc8xx/speed.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
- arch/ppc/cpu/mpc8xx/interrupts.o (.text)
- arch/ppc/cpu/mpc8xx/cpu.o (.text)
- arch/ppc/cpu/mpc8xx/cpu_init.o (.text)
- arch/ppc/cpu/mpc8xx/speed.o (.text)
- arch/ppc/cpu/mpc8xx/serial.o (.text)
- arch/ppc/lib/extable.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
+ arch/powerpc/cpu/mpc8xx/cpu.o (.text)
+ arch/powerpc/cpu/mpc8xx/cpu_init.o (.text)
+ arch/powerpc/cpu/mpc8xx/speed.o (.text)
+ arch/powerpc/cpu/mpc8xx/serial.o (.text)
+ arch/powerpc/lib/extable.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/string.o (.text)
lib/crc32.o (.text)
common/dlmalloc.o (.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
/*. = DEFINED(env_offset) ? env_offset : .;*/
common/env_embedded.o (.ppcenv)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
. = env_offset;
common/env_embedded.o(.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
*(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
* We will over-ride the env_init called in board_init_f
* This is really a work-around because, the HLP bank 1
* where NVRAM resides is not visible during board_init_f
- * (arch/ppc/lib/board.c)
+ * (arch/powerpc/lib/board.c)
* Alternatively, we could use the I2C EEPROM at start-up to configure
* and enable all HLP banks and not just HLP 0 as is being done for
* Taiga Rev. 2.
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc86xx/start.o (.text)
- arch/ppc/cpu/mpc86xx/traps.o (.text)
- arch/ppc/cpu/mpc86xx/interrupts.o (.text)
- arch/ppc/cpu/mpc86xx/cpu_init.o (.text)
- arch/ppc/cpu/mpc86xx/cpu.o (.text)
- arch/ppc/cpu/mpc86xx/speed.o (.text)
+ arch/powerpc/cpu/mpc86xx/start.o (.text)
+ arch/powerpc/cpu/mpc86xx/traps.o (.text)
+ arch/powerpc/cpu/mpc86xx/interrupts.o (.text)
+ arch/powerpc/cpu/mpc86xx/cpu_init.o (.text)
+ arch/powerpc/cpu/mpc86xx/cpu.o (.text)
+ arch/powerpc/cpu/mpc86xx/speed.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
lib/zlib.o (.text)
*(.text)
*(.got1)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc86xx/start.o (.text)
- arch/ppc/cpu/mpc86xx/traps.o (.text)
- arch/ppc/cpu/mpc86xx/interrupts.o (.text)
- arch/ppc/cpu/mpc86xx/cpu_init.o (.text)
- arch/ppc/cpu/mpc86xx/cpu.o (.text)
- arch/ppc/cpu/mpc86xx/speed.o (.text)
+ arch/powerpc/cpu/mpc86xx/start.o (.text)
+ arch/powerpc/cpu/mpc86xx/traps.o (.text)
+ arch/powerpc/cpu/mpc86xx/interrupts.o (.text)
+ arch/powerpc/cpu/mpc86xx/cpu_init.o (.text)
+ arch/powerpc/cpu/mpc86xx/cpu.o (.text)
+ arch/powerpc/cpu/mpc86xx/speed.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
lib/zlib.o (.text)
drivers/bios_emulator/atibios.o (.text)
*(.text)
/*
* Configure the MPC8XX I/O ports per the ioport configuration table
- * (taken from ./arch/ppc/cpu/mpc8260/cpu_init.c)
+ * (taken from ./arch/powerpc/cpu/mpc8260/cpu_init.c)
*/
void config_mpc8xx_ioports (volatile immap_t * immr)
{
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
*(.text)
*(.got1)
}
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
*(.text)
*(.got1)
}
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o(.text)
+ arch/powerpc/cpu/mpc8xx/start.o(.text)
*(.text)
common/env_embedded.o(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/cpu/mpc8xx/interrupts.o (.text)
- arch/ppc/lib/time.o (.text)
- arch/ppc/lib/ticks.o (.text)
- arch/ppc/lib/cache.o (.text)
+ arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
+ arch/powerpc/lib/time.o (.text)
+ arch/powerpc/lib/ticks.o (.text)
+ arch/powerpc/lib/cache.o (.text)
lib/crc32.o (.text)
. = env_offset;
common/env_embedded.o(.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
- arch/ppc/cpu/mpc8xx/interrupts.o (.text)
- arch/ppc/lib/time.o (.text)
- arch/ppc/lib/ticks.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
+ arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
+ arch/powerpc/lib/time.o (.text)
+ arch/powerpc/lib/ticks.o (.text)
. = env_offset;
common/env_embedded.o(.text)
endif
PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc5xxx/u-boot-customlayout.lds
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8260/start.o (.text)
+ arch/powerpc/cpu/mpc8260/start.o (.text)
/*
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
/*
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
. = env_offset;
common/env_embedded.o(.text)
endif
PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc5xxx/u-boot-customlayout.lds
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
- arch/ppc/cpu/mpc8xx/interrupts.o (.text)
- arch/ppc/lib/time.o (.text)
- arch/ppc/lib/ticks.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
+ arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
+ arch/powerpc/lib/time.o (.text)
+ arch/powerpc/lib/ticks.o (.text)
/**
. = env_offset;
common/env_embedded.o(.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
- arch/ppc/cpu/mpc8xx/interrupts.o (.text)
- arch/ppc/lib/time.o (.text)
- arch/ppc/lib/ticks.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
+ arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
+ arch/powerpc/lib/time.o (.text)
+ arch/powerpc/lib/ticks.o (.text)
/**
. = env_offset;
common/env_embedded.o(.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/env_embedded.o(.text)
*(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
. = env_offset;
common/env_embedded.o(.text)
/*
* This function is run very early, out of flash, and before devices are
- * initialized. It is called by arch/ppc/lib/board.c:board_init_f by virtue
+ * initialized. It is called by arch/powerpc/lib/board.c:board_init_f by virtue
* of being in the init_sequence array.
*
* The SDRAM has been initialized already -- start.S:start called
#endif
/*
- * This function is also called by arch/ppc/lib/board.c:board_init_f (it is
+ * This function is also called by arch/powerpc/lib/board.c:board_init_f (it is
* also in the init_sequence array) but later. Many more things are
* configured, but we are still running from flash.
*/
/* **** No more functions called by board_init_f. **** */
/*
- * This function is called by arch/ppc/lib/board.c:board_init_r. At this
+ * This function is called by arch/powerpc/lib/board.c:board_init_r. At this
* point, basic setup is done, U-Boot has been moved into SDRAM and
* PCI has been set up. From here we done late setup.
*/
/*
* this is even after checkboard. It returns the size of the SDRAM
* that we have installed. This function is called by board_init_f
- * in arch/ppc/lib/board.c to initialize the memory and return what I
+ * in arch/powerpc/lib/board.c to initialize the memory and return what I
* found.
*/
phys_size_t initdram (int board_type)
* (C) Copyright 2008
* Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
*
- * Based in part on arch/ppc/cpu/mpc8260/ether_scc.c.
+ * Based in part on arch/powerpc/cpu/mpc8260/ether_scc.c.
*
* See file CREDITS for list of people who contributed to this
* project.
* (C) Copyright 2008
* Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
*
- * Based in part on arch/ppc/cpu/mpc8xx/scc.c.
+ * Based in part on arch/powerpc/cpu/mpc8xx/scc.c.
*
* See file CREDITS for list of people who contributed to this
* project.
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.ppcenv)
* (C) Copyright 2008
* Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
*
- * Based in part on arch/ppc/cpu/mpc8260/ether_scc.c.
+ * Based in part on arch/powerpc/cpu/mpc8260/ether_scc.c.
*
* See file CREDITS for list of people who contributed to this
* project.
.bootpg 0xF7FBF000 :
{
- arch/ppc/cpu/ppc4xx/start.o (.bootpg)
+ arch/powerpc/cpu/ppc4xx/start.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
*(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
/*
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
/*
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
- * This file was adapted from arch/ppc/cpu/mpc5xxx/serial.c
+ * This file was adapted from arch/powerpc/cpu/mpc5xxx/serial.c
*
*/
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/env_embedded.o(.text)
*(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
. = env_offset;
common/env_embedded.o(.text)
{
/* WARNING - the following is hand-optimized to fit within */
/* the first two sectors (=8KB) of our S29GL flash chip */
- cpu/mpc5xxx/start.o (.text)
- cpu/mpc5xxx/traps.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/cache.o (.text)
- lib_ppc/time.o (.text)
+ arch/powerpc/cpu/mpc5xxx/start.o (.text)
+ arch/powerpc/cpu/mpc5xxx/traps.o (.text)
+ lib/crc32.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
/* This is only needed to force failure if size of above code will ever */
/* increase and grow into reserved space. */
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
*(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
. = env_offset;
common/env_embedded.o(.text)
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
- * Code in faintly related to linux/arch/ppc/8xx_io:
+ * Code in faintly related to linux/arch/powerpc/8xx_io:
* MPC8xx CPM I2C interface. Copyright (c) 1999 Dan Malek (dmalek@jlc.net).
*
* This file implements functions to read the MBX's Vital Product Data
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
board/ml2/init.o (.text)
- arch/ppc/cpu/ppc4xx/kgdb.o (.text)
- arch/ppc/cpu/ppc4xx/traps.o (.text)
- arch/ppc/cpu/ppc4xx/interrupts.o (.text)
- arch/ppc/cpu/ppc4xx/4xx_uart.o (.text)
- arch/ppc/cpu/ppc4xx/cpu_init.o (.text)
- arch/ppc/cpu/ppc4xx/speed.o (.text)
+ arch/powerpc/cpu/ppc4xx/kgdb.o (.text)
+ arch/powerpc/cpu/ppc4xx/traps.o (.text)
+ arch/powerpc/cpu/ppc4xx/interrupts.o (.text)
+ arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text)
+ arch/powerpc/cpu/ppc4xx/cpu_init.o (.text)
+ arch/powerpc/cpu/ppc4xx/speed.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
lib/zlib.o (.text)
/* . = env_offset;*/
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
common/env_embedded.o(.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc824x/start.o (.text)
- arch/ppc/lib/board.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/cpu/mpc824x/start.o (.text)
+ arch/powerpc/lib/board.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
PROVIDE(_f_init_rom = .);
.init : {
- arch/ppc/cpu/mpc824x/start.o (.text)
+ arch/powerpc/cpu/mpc824x/start.o (.text)
*(.init)
} > ram
_init_size = SIZEOF(.init);
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc824x/start.o (.text)
+ arch/powerpc/cpu/mpc824x/start.o (.text)
common/board.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
common/env_embedded.o(.text)
endif
PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc5xxx/u-boot.lds
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xxx/u-boot.lds
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc5xxx/start.o (.text)
+ arch/powerpc/cpu/mpc5xxx/start.o (.text)
*(.text)
*(.got1)
. = ALIGN(16);
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
*(.text)
*(.got1)
}
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
*(.text)
*(.got1)
}
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/*
* This function is run very early, out of flash, and before devices are
- * initialized. It is called by arch/ppc/lib/board.c:board_init_f by virtue
+ * initialized. It is called by arch/powerpc/lib/board.c:board_init_f by virtue
* of being in the init_sequence array.
*
* The SDRAM has been initialized already -- start.S:start called
Startup sequence
----------------
-(arch/ppc/cpu/ppc4xx/resetvec.S)
+(arch/powerpc/cpu/ppc4xx/resetvec.S)
depending on configs option
call _start_440 _start_pci oder _start
-(arch/ppc/cpu/ppc4xx/start.S)
+(arch/powerpc/cpu/ppc4xx/start.S)
_start_440:
initialize register like
call cpu_init_f /* run low-level CPU init code (from Flash) */
call cpu_init_f
- board_init_f: (arch/ppc/lib\board.c)
+ board_init_f: (arch/powerpc/lib\board.c)
init_sequence defines a list of function to be called
board_early_init_f: (board/netstal/hcu5/hcu5.c)
We are using Bootstrap-Option A
* - board info struct
Save local variables to board info struct
call relocate_code() does not return
- relocate_code: (arch/ppc/cpu/ppc4xx/start.S)
+ relocate_code: (arch/powerpc/cpu/ppc4xx/start.S)
-------------------------------------------------------
From now on our copy is in RAM and we will run from there,
starting with board_init_r
-------------------------------------------------------
- board_init_r: (arch/ppc/lib\board.c)
+ board_init_r: (arch/powerpc/lib\board.c)
setup bd function pointers
trap_init
flash_init: (board/netstal/hcu5/flash.c)
/* setup for u-boot erase, update */
setup bd flash info
- cpu_init_r: (arch/ppc/cpu/ppc4xx/cpu_init.c)
+ cpu_init_r: (arch/powerpc/cpu/ppc4xx/cpu_init.c)
peripheral chip select in using defines like
CONFIG_SYS_EBC_PB0A, CONFIG_SYS_EBC_PB0C from hcu5.h
mem_malloc_init
Most of the HW specific code for the HCU5 may be found in
include/configs/hcu5.h
board/netstal/hcu5/*
-arch/ppc/cpu/ppc4xx/*
-arch/ppc/lib/*
+arch/powerpc/cpu/ppc4xx/*
+arch/powerpc/lib/*
include/ppc440.h
Drivers for serial etc are found under drivers/
/*
* This function is run very early, out of flash, and before devices are
- * initialized. It is called by arch/ppc/lib/board.c:board_init_f by virtue
+ * initialized. It is called by arch/powerpc/lib/board.c:board_init_f by virtue
* of being in the init_sequence array.
*
* The SDRAM has been initialized already -- start.S:start called
/*
* This function is run very early, out of flash, and before devices are
- * initialized. It is called by arch/ppc/lib/board.c:board_init_f by virtue
+ * initialized. It is called by arch/powerpc/lib/board.c:board_init_f by virtue
* of being in the init_sequence array.
*
* The SDRAM has been initialized already -- start.S:start called
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/env_embedded.o(.text)
*(.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
mtdcr(EBC0_CFGDATA, reg | 0x04000000); /* Set ATC */
/*--------------------------------------------------------------------
- * GPIO's are alreay setup in arch/ppc/cpu/ppc4xx/cpu_init.c
+ * GPIO's are alreay setup in arch/powerpc/cpu/ppc4xx/cpu_init.c
* via define from board config file.
*-------------------------------------------------------------------*/
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
*************************************************************************/
/*
* based on Linux code
- * arch/ppc/galileo/EVB64460/mv64460_eth.c - Driver for MV64460X ethernet ports
+ * arch/powerpc/galileo/EVB64460/mv64460_eth.c - Driver for MV64460X ethernet ports
* Copyright (C) 2002 rabeeh@galileo.co.il
* This program is free software; you can redistribute it and/or
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/cpu_init.o (.text)
- arch/ppc/cpu/mpc8xx/interrupts.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/cpu_init.o (.text)
+ arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
/***
. = env_offset;
common/env_embedded.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8260/start.o (.text)
+ arch/powerpc/cpu/mpc8260/start.o (.text)
*(.text)
*(.got1)
/*. = env_offset; */
*/
/*
- * Ported from arch/ppc/cpu/ppc4xx/i2c.c by AS HARNOIS by
+ * Ported from arch/powerpc/cpu/ppc4xx/i2c.c by AS HARNOIS by
* Travis B. Sawyer
* Sandburst Corporation.
*/
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
board/sandburst/karef/init.o (.text)
- arch/ppc/cpu/ppc4xx/kgdb.o (.text)
- arch/ppc/cpu/ppc4xx/traps.o (.text)
- arch/ppc/cpu/ppc4xx/interrupts.o (.text)
- arch/ppc/cpu/ppc4xx/4xx_uart.o (.text)
- arch/ppc/cpu/ppc4xx/cpu_init.o (.text)
- arch/ppc/cpu/ppc4xx/speed.o (.text)
+ arch/powerpc/cpu/ppc4xx/kgdb.o (.text)
+ arch/powerpc/cpu/ppc4xx/traps.o (.text)
+ arch/powerpc/cpu/ppc4xx/interrupts.o (.text)
+ arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text)
+ arch/powerpc/cpu/ppc4xx/cpu_init.o (.text)
+ arch/powerpc/cpu/ppc4xx/speed.o (.text)
drivers/net/4xx_enet.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
lib/zlib.o (.text)
/* common/env_embedded.o(.text) */
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
board/sandburst/metrobox/init.o (.text)
- arch/ppc/cpu/ppc4xx/kgdb.o (.text)
- arch/ppc/cpu/ppc4xx/traps.o (.text)
- arch/ppc/cpu/ppc4xx/interrupts.o (.text)
- arch/ppc/cpu/ppc4xx/4xx_uart.o (.text)
- arch/ppc/cpu/ppc4xx/cpu_init.o (.text)
- arch/ppc/cpu/ppc4xx/speed.o (.text)
+ arch/powerpc/cpu/ppc4xx/kgdb.o (.text)
+ arch/powerpc/cpu/ppc4xx/traps.o (.text)
+ arch/powerpc/cpu/ppc4xx/interrupts.o (.text)
+ arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text)
+ arch/powerpc/cpu/ppc4xx/cpu_init.o (.text)
+ arch/powerpc/cpu/ppc4xx/speed.o (.text)
drivers/net/4xx_enet.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
lib/zlib.o (.text)
/* common/env_embedded.o(.text) */
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc86xx/start.o (.text)
- arch/ppc/cpu/mpc86xx/traps.o (.text)
- arch/ppc/cpu/mpc86xx/interrupts.o (.text)
- arch/ppc/cpu/mpc86xx/cpu_init.o (.text)
- arch/ppc/cpu/mpc86xx/cpu.o (.text)
- arch/ppc/cpu/mpc86xx/speed.o (.text)
+ arch/powerpc/cpu/mpc86xx/start.o (.text)
+ arch/powerpc/cpu/mpc86xx/traps.o (.text)
+ arch/powerpc/cpu/mpc86xx/interrupts.o (.text)
+ arch/powerpc/cpu/mpc86xx/cpu_init.o (.text)
+ arch/powerpc/cpu/mpc86xx/cpu.o (.text)
+ arch/powerpc/cpu/mpc86xx/speed.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
lib/zlib.o (.text)
*(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
board/sc3/init.o (.text)
- arch/ppc/cpu/ppc4xx/kgdb.o (.text)
- arch/ppc/cpu/ppc4xx/traps.o (.text)
- arch/ppc/cpu/ppc4xx/interrupts.o (.text)
- arch/ppc/cpu/ppc4xx/4xx_uart.o (.text)
- arch/ppc/cpu/ppc4xx/cpu_init.o (.text)
- arch/ppc/cpu/ppc4xx/speed.o (.text)
+ arch/powerpc/cpu/ppc4xx/kgdb.o (.text)
+ arch/powerpc/cpu/ppc4xx/traps.o (.text)
+ arch/powerpc/cpu/ppc4xx/interrupts.o (.text)
+ arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text)
+ arch/powerpc/cpu/ppc4xx/cpu_init.o (.text)
+ arch/powerpc/cpu/ppc4xx/speed.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
lib/zlib.o (.text)
/* . = env_offset;*/
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
- arch/ppc/cpu/mpc8xx/interrupts.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
+ arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = env_offset;
common/env_embedded.o(.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/env_embedded.o(.text)
*(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
. = env_offset;
common/env_embedded.o(.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/env_embedded.o(.text)
*(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.ppcenv)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.ppcenv)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.ppcenv)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/env_embedded.o(.text)
*(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
. = env_offset;
common/env_embedded.o(.text)
#endif
/* Why is the phy reset done _after_ the ethernet
- * initialization in arch/ppc/lib/board.c?
+ * initialization in arch/powerpc/lib/board.c?
* Do it here so it's done before the TSECs are used.
*/
reset_phy();
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = env_offset;
common/env_embedded.o (.ppcenv)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
+ arch/powerpc/lib/cache.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.ppcenv)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
common/env_embedded.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
endif
PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc5xxx/u-boot-customlayout.lds
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
/*
. = env_offset;
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
common/env_embedded.o(.text)
/*
* ToDo: Move the asm init routine sdram_init() to this C file,
* or even better use some common ppc4xx code available
- * in arch/ppc/cpu/ppc4xx
+ * in arch/powerpc/cpu/ppc4xx
*/
sdram_init();
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
. = env_offset;
common/env_embedded.o(.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
board/xes/xpedite1000/init.o (.text)
- arch/ppc/cpu/ppc4xx/kgdb.o (.text)
- arch/ppc/cpu/ppc4xx/traps.o (.text)
- arch/ppc/cpu/ppc4xx/interrupts.o (.text)
- arch/ppc/cpu/ppc4xx/4xx_uart.o (.text)
- arch/ppc/cpu/ppc4xx/cpu_init.o (.text)
- arch/ppc/cpu/ppc4xx/speed.o (.text)
+ arch/powerpc/cpu/ppc4xx/kgdb.o (.text)
+ arch/powerpc/cpu/ppc4xx/traps.o (.text)
+ arch/powerpc/cpu/ppc4xx/interrupts.o (.text)
+ arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text)
+ arch/powerpc/cpu/ppc4xx/cpu_init.o (.text)
+ arch/powerpc/cpu/ppc4xx/speed.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
lib/zlib.o (.text)
/* common/env_embedded.o(.text) */
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc86xx/start.o (.text)
- arch/ppc/cpu/mpc86xx/traps.o (.text)
- arch/ppc/cpu/mpc86xx/interrupts.o (.text)
- arch/ppc/cpu/mpc86xx/cpu_init.o (.text)
- arch/ppc/cpu/mpc86xx/cpu.o (.text)
- arch/ppc/cpu/mpc86xx/speed.o (.text)
+ arch/powerpc/cpu/mpc86xx/start.o (.text)
+ arch/powerpc/cpu/mpc86xx/traps.o (.text)
+ arch/powerpc/cpu/mpc86xx/interrupts.o (.text)
+ arch/powerpc/cpu/mpc86xx/cpu_init.o (.text)
+ arch/powerpc/cpu/mpc86xx/cpu.o (.text)
+ arch/powerpc/cpu/mpc86xx/speed.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
lib/zlib.o (.text)
*(.text)
*(.got1)
.bootpg 0xFFFFF000 :
{
- arch/ppc/cpu/ppc4xx/start.o (.bootpg)
+ arch/powerpc/cpu/ppc4xx/start.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
.bootpg 0xFFFFF000 :
{
- arch/ppc/cpu/ppc4xx/start.o (.bootpg)
+ arch/powerpc/cpu/ppc4xx/start.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
-/* taken from arch/ppc/kernel/ppc-stub.c */
+/* taken from arch/powerpc/kernel/ppc-stub.c */
/****************************************************************************
$ make oldconfig
$ make dep
$ make uImage
- $ cp -p arch/ppc/mbxboot/uImage /tftpboot
+ $ cp -p arch/powerpc/mbxboot/uImage /tftpboot
Load uImage via tftp and boot it.
added console settings from environment
- common/devices.c added ISA keyboard init
- common/main.c corrected the read of bootdelay
-- arch/ppc/cpu/ppc4xx/405gp_pci.c excluded file from PIP405
-- arch/ppc/cpu/ppc4xx/i2c.c added 16bit read write I2C support
+- arch/powerpc/cpu/ppc4xx/405gp_pci.c excluded file from PIP405
+- arch/powerpc/cpu/ppc4xx/i2c.c added 16bit read write I2C support
added page write
-- arch/ppc/cpu/ppc4xx/speed.c added get_PCI_freq
-- arch/ppc/cpu/ppc4xx/start.S added CONFIG_IDENT_STRING
+- arch/powerpc/cpu/ppc4xx/speed.c added get_PCI_freq
+- arch/powerpc/cpu/ppc4xx/start.S added CONFIG_IDENT_STRING
- disk/Makefile added part_iso for CD support
- disk/part.c changed to work with block device description
added ISO CD support
"U_BOOT_VERSION __TIME__ DATE___ " String, to allows to identify intermidiate
and custom versions.
Changed files:
-- arch/ppc/cpu/ppc4xx/start.s
+- arch/powerpc/cpu/ppc4xx/start.s
Firmware Image:
---------------
Correct PCI Frequency for PPC405:
---------------------------------
-Added function (in arch/ppc/cpu/ppc4xx/speed.c) to get the PCI frequency for PPC405 CPU.
+Added function (in arch/powerpc/cpu/ppc4xx/speed.c) to get the PCI frequency for PPC405 CPU.
The PCI Frequency will now be set correct in the board description in common/board.c.
(was set to the busfreq before).
Changed files:
-- arch/ppc/cpu/ppc4xx/speed.c
+- arch/powerpc/cpu/ppc4xx/speed.c
- common/board.c
I2C Stuff:
Added 16bit read/write support for I2C (PPC405), and page write to
I2C EEPROM if defined CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE.
Changed files:
-- arch/ppc/cpu/ppc4xx/i2c.c
+- arch/powerpc/cpu/ppc4xx/i2c.c
- common/cmd_i2c.c
Environment / Console:
reconfiguration of the physical interface chip.
The test routines for the SCC ethernet tests will be located in
-arch/ppc/cpu/mpc8xx/scc.c.
+arch/powerpc/cpu/mpc8xx/scc.c.
2.2.3.2. UART tests (SMC/SCC)
test will be executed manually.
The test routine for the SMC/SCC UART tests will be located in
-arch/ppc/cpu/mpc8xx/serial.c.
+arch/powerpc/cpu/mpc8xx/serial.c.
2.2.3.3. USB test
board/RPXLITE/RPXLITE.c /* DRAM-related routines */
board/RPXLITE/flash.c /* flash-related routines */
board/RPXLITE/config.mk /* set text base address */
- arch/ppc/cpu/mpc8xx/serial.c /* board specific register setting */
+ arch/powerpc/cpu/mpc8xx/serial.c /* board specific register setting */
include/config_RPXLITE.h /* board specific registers */
See 'reg_config.txt' for register values in detail.
MAKEALL - TQM8260 entry added
Makefile - TQM8260_config entry added
-arch/ppc/cpu/mpc8260/Makefile - soft_i2c.o module added
-arch/ppc/cpu/mpc8260/ether_scc.c - TQM8260-specific definitions added, an obvious
+arch/powerpc/cpu/mpc8260/Makefile - soft_i2c.o module added
+arch/powerpc/cpu/mpc8260/ether_scc.c - TQM8260-specific definitions added, an obvious
bug fixed (fcr -> scr)
-arch/ppc/cpu/mpc8260/ether_fcc.c - TQM8260-specific definitions added
+arch/powerpc/cpu/mpc8260/ether_fcc.c - TQM8260-specific definitions added
include/flash.h - added definitions for the AM29LV640D Flash chip
board/tqm8260/flash.c - flash driver (for AM29LV640D)
board/tqm8260/ppcboot.lds - linker script
board/tqm8260/tqm8260.c - ioport and memory initialization
-arch/ppc/cpu/mpc8260/soft_i2c.c - software i2c EEPROM driver
+arch/powerpc/cpu/mpc8260/soft_i2c.c - software i2c EEPROM driver
include/config_TQM8260.h - main configuration file
- include/asm-ppc/global_data.h added global variables - inp_clk, pci_clk,
vco_clk, pev_clk, flb_clk, and bExtUart
-- arch/ppc/lib/board.c added CONFIG_MPC8220 support
+- arch/powerpc/lib/board.c added CONFIG_MPC8220 support
- net/eth.c added FEC support for MPC8220
- board/alaska/config.mk config make
- board/alaska/u-boot.lds Linker description
-- arch/ppc/cpu/mpc8220/dma.h multi-channel dma header file
-- arch/ppc/cpu/mpc8220/dramSetup.h dram setup header file
-- arch/ppc/cpu/mpc8220/fec.h MPC8220 FEC header file
-- arch/ppc/cpu/mpc8220/cpu.c cpu specific code
-- arch/ppc/cpu/mpc8220/cpu_init.c Flexbus ChipSelect and Mux pins setup
-- arch/ppc/cpu/mpc8220/dramSetup.c MPC8220 DDR SDRAM setup
-- arch/ppc/cpu/mpc8220/fec.c MPC8220 FEC driver
-- arch/ppc/cpu/mpc8220/i2c.c MPC8220 I2C driver
-- arch/ppc/cpu/mpc8220/interrupts.c interrupt support (not enable)
-- arch/ppc/cpu/mpc8220/loadtask.c load dma
-- arch/ppc/cpu/mpc8220/speed.c system, pci, flexbus, pev, and cpu clock
-- arch/ppc/cpu/mpc8220/traps.c exception
-- arch/ppc/cpu/mpc8220/uart.c MPC8220 UART driver
-- arch/ppc/cpu/mpc8220/Makefile Makefile
-- arch/ppc/cpu/mpc8220/config.mk config make
-- arch/ppc/cpu/mpc8220/fec_dma_task.S MPC8220 FEC multi-channel dma program
-- arch/ppc/cpu/mpc8220/io.S io functions
-- arch/ppc/cpu/mpc8220/start.S start up
+- arch/powerpc/cpu/mpc8220/dma.h multi-channel dma header file
+- arch/powerpc/cpu/mpc8220/dramSetup.h dram setup header file
+- arch/powerpc/cpu/mpc8220/fec.h MPC8220 FEC header file
+- arch/powerpc/cpu/mpc8220/cpu.c cpu specific code
+- arch/powerpc/cpu/mpc8220/cpu_init.c Flexbus ChipSelect and Mux pins setup
+- arch/powerpc/cpu/mpc8220/dramSetup.c MPC8220 DDR SDRAM setup
+- arch/powerpc/cpu/mpc8220/fec.c MPC8220 FEC driver
+- arch/powerpc/cpu/mpc8220/i2c.c MPC8220 I2C driver
+- arch/powerpc/cpu/mpc8220/interrupts.c interrupt support (not enable)
+- arch/powerpc/cpu/mpc8220/loadtask.c load dma
+- arch/powerpc/cpu/mpc8220/speed.c system, pci, flexbus, pev, and cpu clock
+- arch/powerpc/cpu/mpc8220/traps.c exception
+- arch/powerpc/cpu/mpc8220/uart.c MPC8220 UART driver
+- arch/powerpc/cpu/mpc8220/Makefile Makefile
+- arch/powerpc/cpu/mpc8220/config.mk config make
+- arch/powerpc/cpu/mpc8220/fec_dma_task.S MPC8220 FEC multi-channel dma program
+- arch/powerpc/cpu/mpc8220/io.S io functions
+- arch/powerpc/cpu/mpc8220/start.S start up
- include/mpc8220.h
./common/board.c
Added call to initialize debugger on startup.
-./arch/ppc/cpu/ppc4xx/Makefile
+./arch/powerpc/cpu/ppc4xx/Makefile
Added bedbug_405.c to the Makefile.
-./arch/ppc/cpu/ppc4xx/start.S
+./arch/powerpc/cpu/ppc4xx/start.S
Added code to handle the debug exception (0x2000) on the 405.
Also added code to handle critical exceptions since the debug
is treated as critical on the 405.
-./arch/ppc/cpu/ppc4xx/traps.c
+./arch/powerpc/cpu/ppc4xx/traps.c
Added more detailed output for the program exception to tell
if it is an illegal instruction, privileged instruction or
a trap. Also added debug trap handler.
hardware breakpoints and stepping through code. These
routines are common to all PowerPC processors.
-./arch/ppc/cpu/ppc4xx/bedbug_405.c
+./arch/powerpc/cpu/ppc4xx/bedbug_405.c
AMCC PPC405 specific debugger routines.
common/cmd_bedbug.c
Added call to initialize 860 debugger.
- arch/ppc/cpu/mpc8xx/Makefile
+ arch/powerpc/cpu/mpc8xx/Makefile
Added new file "bedbug_860.c" to the makefile
- arch/ppc/cpu/mpc8xx/start.S
+ arch/powerpc/cpu/mpc8xx/start.S
Added handler for InstructionBreakpoint (0xfd00)
- arch/ppc/cpu/mpc8xx/traps.c
+ arch/powerpc/cpu/mpc8xx/traps.c
Added new routine DebugException()
New Files:
- arch/ppc/cpu/mpc8xx/bedbug_860.c
+ arch/powerpc/cpu/mpc8xx/bedbug_860.c
CPU-specific routines for 860 debug registers.
u-boot-0.2.0/common/cmd_boot.c
u-boot-0.2.0/common/cmd_reginfo.c
u-boot-0.2.0/common/environment.c
-u-boot-0.2.0/arch/ppc/cpu/mpc5xx/*
+u-boot-0.2.0/arch/powerpc/cpu/mpc5xx/*
u-boot-0.2.0/include/cmd_reginfo.h
u-boot-0.2.0/include/common.h
u-boot-0.2.0/include/ppc_asm.tmpl
u-boot-0.2.0/include/status_led.h
u-boot-0.2.0/include/asm-ppc/u-boot.h
u-boot-0.2.0/include/asm-ppc/5xx_immap.h
-u-boot-0.2.0/arch/ppc/lib/board.c
-u-boot-0.2.0/arch/ppc/lib/cache.c
-u-boot-0.2.0/arch/ppc/lib/time.c
+u-boot-0.2.0/arch/powerpc/lib/board.c
+u-boot-0.2.0/arch/powerpc/lib/cache.c
+u-boot-0.2.0/arch/powerpc/lib/time.c
u-boot-0.2.0/Makefile
u-boot-0.2.0/CREDITS
u-boot-0.2.0/doc/README.mpc5xx
kernel's ppcboot.h is consistent with U-Boot's u-boot.h. You can use two
default configuration files as your starting points to configure the
kernel:
- arch/ppc/configs/mpc8540_ads_defconfig
- arch/ppc/configs/mpc8560_ads_defconfig
+ arch/powerpc/configs/mpc8540_ads_defconfig
+ arch/powerpc/configs/mpc8560_ads_defconfig
3. DEFINITIONS AND COMPILATION
/*
- * arch/ppc/kernel/pci_auto.c
+ * arch/powerpc/kernel/pci_auto.c
*
* PCI autoconfiguration library
*
/*--------------------------------------------------------------------+
* Fixed PHY (PHY-less) support for Ethernet Ports.
*
- * Copied from arch/ppc/cpu/ppc4xx/4xx_enet.c
+ * Copied from arch/powerpc/cpu/ppc4xx/4xx_enet.c
*--------------------------------------------------------------------*/
/*
/*
* COM1 NS16550 support
- * originally from linux source (arch/ppc/boot/ns16550.c)
+ * originally from linux source (arch/powerpc/boot/ns16550.c)
* modified to use CONFIG_SYS_ISA_MEM and new defines
*/
/*
* Copyright (c) 2006 Ben Warren, Qstreams Networks Inc.
- * With help from the common/soft_spi and arch/ppc/cpu/mpc8260 drivers
+ * With help from the common/soft_spi and arch/powerpc/cpu/mpc8260 drivers
*
* See file CREDITS for list of people who contributed to this
* project.
# MA 02111-1307 USA
#
-ifeq ($(ARCH),ppc)
+ifeq ($(ARCH),powerpc)
LOAD_ADDR = 0x40000
endif
ifeq ($(ARCH),arm)
EXT_COBJ_FILES-$(CONFIG_API) += lib/string.o
EXT_COBJ_FILES-$(CONFIG_API) += lib/time.o
EXT_COBJ_FILES-$(CONFIG_API) += lib/vsprintf.o
-ifeq ($(ARCH),ppc)
-EXT_SOBJ_FILES-$(CONFIG_API) += arch/ppc/lib/ppcstring.o
+ifeq ($(ARCH),powerpc)
+EXT_SOBJ_FILES-$(CONFIG_API) += arch/powerpc/lib/ppcstring.o
endif
# Create a list of source files so their dependencies can be auto-generated
/* The dpalloc function used and implemented in this file was derieved
- * from PPCBoot/U-Boot file "arch/ppc/cpu/mpc8260/commproc.c".
+ * from PPCBoot/U-Boot file "arch/powerpc/cpu/mpc8260/commproc.c".
*/
/* Author: Arun Dharankar <ADharankar@ATTBI.Com>
*/
/*
- * This file is based on "arch/ppc/8260_io/commproc.c" - here is it's
+ * This file is based on "arch/powerpc/8260_io/commproc.c" - here is it's
* copyright notice:
*
* General Purpose functions for the global management of the
/*
* Backward compatible definitions,
- * so we do not have to change arch/ppc/cpu/mpc512x/fixed_sdram.c
+ * so we do not have to change arch/powerpc/cpu/mpc512x/fixed_sdram.c
*/
#define CONFIG_SYS_DDRCMD_EM2 (CONFIG_SYS_MICRON_EMR2)
#define CONFIG_SYS_DDRCMD_EM3 (CONFIG_SYS_MICRON_EMR3)
#define CONFIG_SYS_FLASH_BASE 0xfe000000
/*
- * The flash size is autoconfigured, but arch/ppc/cpu/mpc5xxx/cpu_init.c needs this
+ * The flash size is autoconfigured, but arch/powerpc/cpu/mpc5xxx/cpu_init.c needs this
* variable defined
*/
#define CONFIG_SYS_FLASH_SIZE 0x02000000
* SDRAM Controller DDR autocalibration values and takes a lot longer
* to run than Method_B.
* (See the Method_A and Method_B algorithm discription in the file:
- * arch/ppc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c)
+ * arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c)
* Define CONFIG_PPC4xx_DDR_METHOD_A to use DDR autocalibration Method_A
*
* DDR Autocalibration Method_B is the default.
* taken from the orignal Linkstation boot code
*
* Most of the low level configuration setttings are normally used
- * in arch/ppc/cpu/mpc824x/cpu_init.c which is NOT used by this implementation.
+ * in arch/powerpc/cpu/mpc824x/cpu_init.c which is NOT used by this implementation.
* Low level initialisation is done in board/linkstation/early_init.S
* The values below are included for reference purpose only
*/
* Definitions for initial stack pointer and data area (in data cache)
*/
/* use on chip memory (OCM) for temperary stack until sdram is tested */
-/* see ./arch/ppc/cpu/ppc4xx/start.S */
+/* see ./arch/powerpc/cpu/ppc4xx/start.S */
#define CONFIG_SYS_TEMP_STACK_OCM 1
/* On Chip Memory location */
* Taken from PPCBoot board/icecube/icecube.h
*/
-/* see ./arch/ppc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */
+/* see ./arch/powerpc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */
#define CONFIG_SYS_EBC_PB0AP 0x04002480
/* AMD NOR flash - this corresponds to FLASH_BASE so may be correct */
#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000
*
* Taken in part from PPCBoot board/icecube/icecube.h
*/
-/* see ./arch/ppc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */
+/* see ./arch/powerpc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */
#define CONFIG_SYS_GPIO0_OSRH 0x55555550
#define CONFIG_SYS_GPIO0_OSRL 0x00000110
#define CONFIG_SYS_GPIO0_ISR1H 0x00000000
* - internal SRAM (OCM=On Chip Memory) is placed to CONFIG_SYS_OCM_DATA_ADDR
* - Stackpointer will be located to
* (CONFIG_SYS_INIT_RAM_ADDR&0xFFFF0000) | (CONFIG_SYS_INIT_SP_OFFSET&0x0000FFFF)
- * in arch/ppc/cpu/ppc4xx/start.S
+ * in arch/powerpc/cpu/ppc4xx/start.S
*/
#undef CONFIG_SYS_INIT_DCACHE_CS
#define BOOTFLAG_WARM 0x02 /* Software reboot */
/* ################################################################################### */
-/* These defines will be used in arch/ppc/cpu/ppc4xx/cpu_init.c to setup external chip selects */
+/* These defines will be used in arch/powerpc/cpu/ppc4xx/cpu_init.c to setup external chip selects */
/* They are currently undefined cause they are initiaized in board/solidcard3/init.S */
/* This chip select accesses the boot device */
/*
* NS16550 Serial Port
- * originally from linux source (arch/ppc/boot/ns16550.h)
+ * originally from linux source (arch/powerpc/boot/ns16550.h)
*
* Cleanup and unification
* (C) 2009 by Detlev Zundel, DENX Software Engineering GmbH
*
* Code generated for this function might be very inefficient
* for some CPUs. __div64_32() can be overridden by linking arch-specific
- * assembly versions such as arch/ppc/lib/div64.S and arch/sh/lib/div64.S.
+ * assembly versions such as arch/powerpc/lib/div64.S and arch/sh/lib/div64.S.
*/
#include <linux/types.h>
# from cpu directory
$(obj)cache.S:
@rm -f $(obj)cache.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/cache.S $(obj)cache.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/cache.S $(obj)cache.S
$(obj)gpio.c:
@rm -f $(obj)gpio.c
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/gpio.c $(obj)gpio.c
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/gpio.c $(obj)gpio.c
$(obj)ndfc.c:
@rm -f $(obj)ndfc.c
$(obj)resetvec.S:
@rm -f $(obj)resetvec.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
$(obj)start.S:
@rm -f $(obj)start.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/start.S $(obj)start.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $(obj)start.S
# from board directory
$(obj)memory.c:
$(obj)resetvec.S:
@rm -f $(obj)resetvec.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
$(obj)start.S:
@rm -f $(obj)start.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/start.S $(obj)start.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $(obj)start.S
# from board directory
$(obj)init.S:
$(obj)resetvec.S:
@rm -f $(obj)resetvec.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
$(obj)start.S:
@rm -f $(obj)start.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/start.S $(obj)start.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $(obj)start.S
# from board directory
$(obj)init.S:
# from cpu directory
$(obj)44x_spd_ddr2.c: $(obj)ecc.h
@rm -f $(obj)44x_spd_ddr2.c
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/44x_spd_ddr2.c $(obj)44x_spd_ddr2.c
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c $(obj)44x_spd_ddr2.c
$(obj)cache.S:
@rm -f $(obj)cache.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/cache.S $(obj)cache.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/cache.S $(obj)cache.S
$(obj)ecc.h:
@rm -f $(obj)ecc.h
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/ecc.h $(obj)ecc.h
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/ecc.h $(obj)ecc.h
$(obj)ndfc.c:
@rm -f $(obj)ndfc.c
$(obj)resetvec.S:
@rm -f $(obj)resetvec.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
$(obj)start.S:
@rm -f $(obj)start.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/start.S $(obj)start.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $(obj)start.S
# from nand_spl directory
$(obj)nand_boot.c:
# from cpu directory
$(obj)denali_data_eye.c:
@rm -f $(obj)denali_data_eye.c
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/denali_data_eye.c $(obj)denali_data_eye.c
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/denali_data_eye.c $(obj)denali_data_eye.c
$(obj)ndfc.c:
@rm -f $(obj)ndfc.c
$(obj)resetvec.S:
@rm -f $(obj)resetvec.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
$(obj)start.S:
@rm -f $(obj)start.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/start.S $(obj)start.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $(obj)start.S
# from board directory
$(obj)init.S:
# create symbolic links for common files
$(obj)start.S:
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc83xx/start.S $(obj)start.S
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/start.S $(obj)start.S
$(obj)nand_boot_fsl_elbc.c:
ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \
ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
$(obj)nand_init.c:
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc83xx/nand_init.c $(obj)nand_init.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/nand_init.c $(obj)nand_init.c
$(obj)cache.c:
- ln -sf $(SRCTREE)/arch/ppc/lib/cache.c $(obj)cache.c
+ ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
$(obj)time.c:
- ln -sf $(SRCTREE)/arch/ppc/lib/time.c $(obj)time.c
+ ln -sf $(SRCTREE)/arch/powerpc/lib/time.c $(obj)time.c
$(obj)ticks.S:
- ln -sf $(SRCTREE)/arch/ppc/lib/ticks.S $(obj)ticks.S
+ ln -sf $(SRCTREE)/arch/powerpc/lib/ticks.S $(obj)ticks.S
#########################################################################
# create symbolic links for common files
$(obj)start.S:
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc83xx/start.S $(obj)start.S
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/start.S $(obj)start.S
$(obj)nand_boot_fsl_elbc.c:
ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \
ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
$(obj)nand_init.c:
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc83xx/nand_init.c $(obj)nand_init.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/nand_init.c $(obj)nand_init.c
$(obj)cache.c:
- ln -sf $(SRCTREE)/arch/ppc/lib/cache.c $(obj)cache.c
+ ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
$(obj)time.c:
- ln -sf $(SRCTREE)/arch/ppc/lib/time.c $(obj)time.c
+ ln -sf $(SRCTREE)/arch/powerpc/lib/time.c $(obj)time.c
$(obj)ticks.S:
- ln -sf $(SRCTREE)/arch/ppc/lib/ticks.S $(obj)ticks.S
+ ln -sf $(SRCTREE)/arch/powerpc/lib/ticks.S $(obj)ticks.S
#########################################################################
$(obj)cache.c:
@rm -f $(obj)cache.c
- ln -sf $(SRCTREE)/arch/ppc/lib/cache.c $(obj)cache.c
+ ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
$(obj)cpu_init_early.c:
@rm -f $(obj)cpu_init_early.c
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
$(obj)cpu_init_nand.c:
@rm -f $(obj)cpu_init_nand.c
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/cpu_init_nand.c $(obj)cpu_init_nand.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c $(obj)cpu_init_nand.c
$(obj)fsl_law.c:
@rm -f $(obj)fsl_law.c
$(obj)fixed_ivor.S:
@rm -f $(obj)fixed_ivor.S
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S
$(obj)start.S: $(obj)fixed_ivor.S
@rm -f $(obj)start.S
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/start.S $(obj)start.S
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $(obj)start.S
$(obj)tlb.c:
@rm -f $(obj)tlb.c
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/tlb.c $(obj)tlb.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $(obj)tlb.c
$(obj)tlb_table.c:
@rm -f $(obj)tlb_table.c
$(obj)cache.c:
@rm -f $(obj)cache.c
- ln -sf $(SRCTREE)/arch/ppc/lib/cache.c $(obj)cache.c
+ ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
$(obj)cpu_init_early.c:
@rm -f $(obj)cpu_init_early.c
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
$(obj)cpu_init_nand.c:
@rm -f $(obj)cpu_init_nand.c
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/cpu_init_nand.c $(obj)cpu_init_nand.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c $(obj)cpu_init_nand.c
$(obj)fsl_law.c:
@rm -f $(obj)fsl_law.c
$(obj)fixed_ivor.S:
@rm -f $(obj)fixed_ivor.S
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S
$(obj)start.S: $(obj)fixed_ivor.S
@rm -f $(obj)start.S
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/start.S $(obj)start.S
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $(obj)start.S
$(obj)tlb.c:
@rm -f $(obj)tlb.c
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/tlb.c $(obj)tlb.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $(obj)tlb.c
$(obj)tlb_table.c:
@rm -f $(obj)tlb_table.c
$(obj)cache.c:
@rm -f $(obj)cache.c
- ln -sf $(SRCTREE)/arch/ppc/lib/cache.c $(obj)cache.c
+ ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
$(obj)cpu_init_early.c:
@rm -f $(obj)cpu_init_early.c
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
$(obj)cpu_init_nand.c:
@rm -f $(obj)cpu_init_nand.c
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/cpu_init_nand.c $(obj)cpu_init_nand.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c $(obj)cpu_init_nand.c
$(obj)fsl_law.c:
@rm -f $(obj)fsl_law.c
$(obj)fixed_ivor.S:
@rm -f $(obj)fixed_ivor.S
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S
$(obj)start.S: $(obj)fixed_ivor.S
@rm -f $(obj)start.S
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/start.S $(obj)start.S
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $(obj)start.S
$(obj)tlb.c:
@rm -f $(obj)tlb.c
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/tlb.c $(obj)tlb.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $(obj)tlb.c
$(obj)tlb_table.c:
@rm -f $(obj)tlb_table.c
$(obj)start.S:
@rm -f $@
- ln -s $(SRCTREE)/arch/ppc/cpu/mpc83xx/start.S $@
+ ln -s $(SRCTREE)/arch/powerpc/cpu/mpc83xx/start.S $@
$(obj)nand_boot_fsl_elbc.c:
@rm -f $@
$(obj)nand_init.c:
@rm -f $@
- ln -s $(SRCTREE)/arch/ppc/cpu/mpc83xx/nand_init.c $@
+ ln -s $(SRCTREE)/arch/powerpc/cpu/mpc83xx/nand_init.c $@
$(obj)cache.c:
@rm -f $@
- ln -s $(SRCTREE)/arch/ppc/lib/cache.c $@
+ ln -s $(SRCTREE)/arch/powerpc/lib/cache.c $@
$(obj)time.c:
@rm -f $@
- ln -s $(SRCTREE)/arch/ppc/lib/time.c $@
+ ln -s $(SRCTREE)/arch/powerpc/lib/time.c $@
$(obj)ticks.S:
@rm -f $@
- ln -s $(SRCTREE)/arch/ppc/lib/ticks.S $@
+ ln -s $(SRCTREE)/arch/powerpc/lib/ticks.S $@
#########################################################################
/* Additional Special-Purpose Registers.
* The values must match the initialization
- * values from arch/ppc/cpu/ppc4xx/start.S
+ * values from arch/powerpc/cpu/ppc4xx/start.S
*/
{0x30, "PID", 0x00000000, 0x00000000},
{0x3a, "CSRR0", 0x00000000, 0x00000000},
#
include $(TOPDIR)/config.mk
-LIB = libpostppc.a
+LIB = libpost$(ARCH).a
AOBJS-$(CONFIG_HAS_POST) += asm.o
COBJS-$(CONFIG_HAS_POST) += cpu.o cmp.o cmpi.o two.o twox.o three.o threex.o
#
include $(TOPDIR)/config.mk
-LIB = libpostppcfpu.a
+LIB = libpost$(ARCH)fpu.a
COBJS-$(CONFIG_HAS_POST) += fpu.o 20001122-1.o 20010114-2.o 20010226-1.o 980619-1.o
COBJS-$(CONFIG_HAS_POST) += acc1.o compare-fp-1.o mul-subnormal-single-1.o
projects / u-boot.git / commitdiff
