/*
* Manually set the parent of the SPI flash to SPI, since dtoc doesn't. We also
* need to allocate the parent_platdata since by the time this function is
- * called device_bind_offset() has already gone past that step.
+ * called device_bind() has already gone past that step.
*/
static int apl_flash_bind(struct udevice *dev)
{
*/
int at91_clk_sub_device_bind(struct udevice *dev, const char *drv_name)
{
- const void *fdt = gd->fdt_blob;
- int offset = dev_of_offset(dev);
+ ofnode parent = dev_ofnode(dev);
+ ofnode node;
bool pre_reloc_only = !(gd->flags & GD_FLG_RELOC);
const char *name;
int ret;
- for (offset = fdt_first_subnode(fdt, offset);
- offset > 0;
- offset = fdt_next_subnode(fdt, offset)) {
- if (pre_reloc_only &&
- !ofnode_pre_reloc(offset_to_ofnode(offset)))
+ ofnode_for_each_subnode(node, parent) {
+ if (pre_reloc_only && !ofnode_pre_reloc(node))
continue;
/*
* If this node has "compatible" property, this is not
* a clock sub-node, but a normal device. skip.
*/
- fdt_get_property(fdt, offset, "compatible", &ret);
- if (ret >= 0)
+ if (ofnode_read_prop(node, "compatible", NULL))
continue;
if (ret != -FDT_ERR_NOTFOUND)
return ret;
- name = fdt_get_name(fdt, offset, NULL);
+ name = ofnode_get_name(node);
if (!name)
return -EINVAL;
- ret = device_bind_driver_to_node(dev, drv_name, name,
- offset_to_ofnode(offset), NULL);
+ ret = device_bind_driver_to_node(dev, drv_name, name, node,
+ NULL);
if (ret)
return ret;
}
return -ENOENT;
}
- ret = device_bind_offset(parent, drv, name, NULL, -1, &clk->dev);
+ ret = device_bind(parent, drv, name, NULL, ofnode_null(), &clk->dev);
if (ret) {
printf("%s: CLK: %s driver bind error [%d]!\n", __func__, name,
ret);
plat->gpio_count = MTK_BANK_WIDTH;
plat->bank = bank;
- ret = device_bind_offset(parent, parent->driver,
- plat->bank_name, plat, -1, &dev);
+ ret = device_bind(parent, parent->driver, plat->bank_name, plat,
+ ofnode_null(), &dev);
if (ret)
return ret;
return -ENOMEM;
plat->bank_name = fdt_get_name(blob, node, NULL);
- ret = device_bind_offset(parent, parent->driver,
- plat->bank_name, plat, -1, &dev);
+ ret = device_bind(parent, parent->driver, plat->bank_name, plat,
+ ofnode_null(), &dev);
if (ret)
return ret;
plat->bank_name = gpio_bank_name(soc_data->start + bank);
plat->gpio_count = SUNXI_GPIOS_PER_BANK;
- ret = device_bind_offset(parent, parent->driver,
- plat->bank_name, plat, -1, &dev);
+ ret = device_bind(parent, parent->driver, plat->bank_name, plat,
+ ofnode_null(), &dev);
if (ret)
return ret;
dev_set_of_offset(dev, dev_of_offset(parent));
plat->name = ctlr_data->ports[port].name;
plat->regs = &(regs[ctlr_data->ports[port].offset / 4]);
- ret = device_bind_offset(parent, parent->driver, plat->name,
- plat, -1, &dev);
+ ret = device_bind(parent, parent->driver, plat->name, plat,
+ ofnode_null(), &dev);
if (ret)
return ret;
dev_set_of_offset(dev, dev_of_offset(parent));
plat->base_gpio = TEGRA_GPIOS_PER_PORT * base_port;
plat->port_name = gpio_port_name(base_port);
- ret = device_bind_offset(parent, parent->driver,
- plat->port_name, plat, -1,
- &dev);
+ ret = device_bind(parent, parent->driver,
+ plat->port_name, plat, ofnode_null(),
+ &dev);
if (ret)
return ret;
dev_set_of_offset(dev, dev_of_offset(parent));
sprintf(name, "mvpp2-%d", id);
/* Create child device UCLASS_ETH and bind it */
- device_bind_offset(parent, &mvpp2_driver, name, plat, subnode, &dev);
- dev_set_of_offset(dev, subnode);
+ device_bind(parent, &mvpp2_driver, name, plat,
+ offset_to_ofnode(subnode), &dev);
}
return 0;
struct udevice *pdev;
/* Create GPIO device as well */
- ret = device_bind_offset(dev, lists_driver_lookup_name("gpio_bcm2835"),
- "gpio_bcm2835", NULL, dev_of_offset(dev),
- &pdev);
+ ret = device_bind(dev, lists_driver_lookup_name("gpio_bcm2835"),
+ "gpio_bcm2835", NULL, dev_ofnode(dev), &pdev);
if (ret) {
/*
* While we really want the pinctrl driver to work to make
int na, ns;
char *name;
+ /* FIXME: Should use livetree */
na = fdt_address_cells(gd->fdt_blob, dev_of_offset(dev->parent));
if (na < 1) {
debug("bad #address-cells\n");
sprintf(name, "meson-gpio");
/* Create child device UCLASS_GPIO and bind it */
- device_bind_offset(dev, priv->data->gpio_driver, name, NULL, gpio, &gpio_dev);
+ device_bind(dev, priv->data->gpio_driver, name, NULL,
+ offset_to_ofnode(gpio), &gpio_dev);
dev_set_of_offset(gpio_dev, gpio);
return 0;
if (ret)
return ret;
- ret = device_bind_offset(dev, &jr2_gpio_driver, "jr2-gpio", NULL,
- dev_of_offset(dev), NULL);
+ ret = device_bind(dev, &jr2_gpio_driver, "jr2-gpio", NULL,
+ dev_ofnode(dev), NULL);
if (ret)
return ret;
if (ret)
return ret;
- ret = device_bind_offset(dev, &luton_gpio_driver, "luton-gpio", NULL,
- dev_of_offset(dev), NULL);
+ ret = device_bind(dev, &luton_gpio_driver, "luton-gpio", NULL,
+ dev_ofnode(dev), NULL);
return 0;
}
if (ret)
return ret;
- ret = device_bind_offset(dev, &ocelot_gpio_driver, "ocelot-gpio", NULL,
- dev_of_offset(dev), NULL);
+ ret = device_bind(dev, &ocelot_gpio_driver, "ocelot-gpio", NULL,
+ dev_ofnode(dev), NULL);
return ret;
}
if (ret)
return ret;
- ret = device_bind_offset(dev, &serval_gpio_driver, "serval-gpio", NULL,
- dev_of_offset(dev), NULL);
+ ret = device_bind(dev, &serval_gpio_driver, "serval-gpio", NULL,
+ dev_ofnode(dev), NULL);
if (ret)
return ret;
if (ret)
return ret;
- ret = device_bind_offset(dev, &servalt_gpio_driver, "servalt-gpio", NULL,
- dev_of_offset(dev), NULL);
+ ret = device_bind(dev, &servalt_gpio_driver, "servalt-gpio", NULL,
+ dev_ofnode(dev), NULL);
if (ret)
return ret;
int subnode;
char *name;
- /* Lookup GPIO driver */
+ /* FIXME: Should not need to lookup GPIO uclass */
drv = lists_uclass_lookup(UCLASS_GPIO);
if (!drv) {
puts("Cannot find GPIO driver\n");
return -ENOENT;
}
+ /* FIXME: Use livtree and check the result of device_bind() below */
fdt_for_each_subnode(subnode, blob, node) {
if (fdtdec_get_bool(blob, subnode, "gpio-controller")) {
ret = 0;
sprintf(name, "armada-37xx-gpio");
/* Create child device UCLASS_GPIO and bind it */
- device_bind_offset(parent, &armada_37xx_gpio_driver, name, NULL,
- subnode, &dev);
- dev_set_of_offset(dev, subnode);
+ device_bind(parent, &armada_37xx_gpio_driver, name, NULL,
+ offset_to_ofnode(subnode), &dev);
return 0;
}
- 'include/power/regulator.h'
- 'drivers/power/pmic/pmic-uclass.c'
- 'drivers/power/pmic/regulator-uclass.c'
- It's important to call the device_bind_offset() with the proper node offset,
+ It's important to call the device_bind() with the proper node offset,
when binding the regulator devices. The pmic_bind_childs() can be used
for this purpose if PMIC I/O driver is implemented or dm_scan_fdt_dev()
otherwise. Detailed information can be found in the header file.
* @return 0 if OK, -ve on error
*/
int device_bind_offset(struct udevice *parent, const struct driver *drv,
- const char *name, void *platdata, int of_offset,
- struct udevice **devp);
+ const char *name, void *platdata, int of_offset,
+ struct udevice **devp);
int device_bind(struct udevice *parent, const struct driver *drv,
const char *name, void *platdata, ofnode node,
* If regulator-name property is not provided, node name will be chosen.
*
* Regulator bind:
- * For each regulator device, the device_bind_offset() should be called with passed
+ * For each regulator device, the device_bind() should be called with passed
* device tree offset. This is required for this uclass's '.post_bind' method,
* which does the scan on the device node, for the 'regulator-name' constraint.
* If the parent is not a PMIC device, and the child is not bind by function: