spl: nand: sunxi: create an helper to handle command execution

Executing a command is matter of always doing the following sequence:
  * Waiting for the FIFO to be empty so we can fill it with the new
    command.
  * Clearing the status register.
  * Writing the command in the FIFO.
  * Waiting for the command to finish.

Add a nand_exec_cmd() helper to handle this instead of repeating the
logic through the various functions.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

diff --git a/drivers/mtd/nand/sunxi_nand_spl.c b/drivers/mtd/nand/sunxi_nand_spl.c
index 913de7d44251e0d64d5782947be0f888696ea963..25a0941fd2c68f3d84b271b59b9c2fbf8578d0e1 100644 (file)
--- a/drivers/mtd/nand/sunxi_nand_spl.c
+++ b/drivers/mtd/nand/sunxi_nand_spl.c
@@ -177,6 +177,20 @@ static int nand_wait_int(void)
        return 0;
 }
 
+static int nand_exec_cmd(u32 cmd)
+{
+       int ret;
+
+       ret = nand_wait_cmd_fifo_empty();
+       if (ret)
+               return ret;
+
+       writel(NFC_ST_CMD_INT_FLAG, SUNXI_NFC_BASE + NFC_ST);
+       writel(cmd, SUNXI_NFC_BASE + NFC_CMD);
+
+       return nand_wait_int();
+}
+
 void nand_init(void)
 {
        uint32_t val;
@@ -194,13 +208,7 @@ void nand_init(void)
        }
 
        /* reset NAND */
-       nand_wait_cmd_fifo_empty();
-
-       writel(NFC_ST_CMD_INT_FLAG, SUNXI_NFC_BASE + NFC_ST);
-       writel(NFC_SEND_CMD1 | NFC_WAIT_FLAG | NAND_CMD_RESET,
-              SUNXI_NFC_BASE + NFC_CMD);
-
-       nand_wait_int();
+       nand_exec_cmd(NFC_SEND_CMD1 | NFC_WAIT_FLAG | NAND_CMD_RESET);
 }
 
 static void nand_apply_config(const struct nfc_config *conf)
@@ -221,37 +229,29 @@ static int nand_load_page(const struct nfc_config *conf, u32 offs)
 {
        int page = offs / conf->page_size;
 
-       nand_wait_cmd_fifo_empty();
-
        writel((NFC_CMD_RNDOUTSTART << NFC_RANDOM_READ_CMD1_OFFSET) |
               (NFC_CMD_RNDOUT << NFC_RANDOM_READ_CMD0_OFFSET) |
               (NFC_CMD_READSTART << NFC_READ_CMD_OFFSET),
               SUNXI_NFC_BASE + NFC_RCMD_SET);
        writel(((page & 0xFFFF) << 16), SUNXI_NFC_BASE + NFC_ADDR_LOW);
        writel((page >> 16) & 0xFF, SUNXI_NFC_BASE + NFC_ADDR_HIGH);
-       writel(NFC_ST_CMD_INT_FLAG, SUNXI_NFC_BASE + NFC_ST);
-       writel(NFC_SEND_CMD1 | NFC_SEND_CMD2 | NFC_RAW_CMD | NFC_WAIT_FLAG |
-              ((conf->addr_cycles - 1) << NFC_ADDR_NUM_OFFSET) | NFC_SEND_ADDR,
-              SUNXI_NFC_BASE + NFC_CMD);
 
-       return nand_wait_int();
+       return nand_exec_cmd(NFC_SEND_CMD1 | NFC_SEND_CMD2 | NFC_RAW_CMD |
+                            NFC_SEND_ADDR | NFC_WAIT_FLAG |
+                            ((conf->addr_cycles - 1) << NFC_ADDR_NUM_OFFSET));
 }
 
 static int nand_reset_column(void)
 {
-       nand_wait_cmd_fifo_empty();
-
        writel((NFC_CMD_RNDOUTSTART << NFC_RANDOM_READ_CMD1_OFFSET) |
               (NFC_CMD_RNDOUT << NFC_RANDOM_READ_CMD0_OFFSET) |
               (NFC_CMD_RNDOUTSTART << NFC_READ_CMD_OFFSET),
               SUNXI_NFC_BASE + NFC_RCMD_SET);
-       writel(NFC_ST_CMD_INT_FLAG, SUNXI_NFC_BASE + NFC_ST);
        writel(0, SUNXI_NFC_BASE + NFC_ADDR_LOW);
-       writel(NFC_SEND_CMD1 | NFC_SEND_CMD2 | NFC_RAW_CMD |
-              (1 << NFC_ADDR_NUM_OFFSET) | NFC_SEND_ADDR | NFC_CMD_RNDOUT,
-              SUNXI_NFC_BASE + NFC_CMD);
 
-       return nand_wait_int();
+       return nand_exec_cmd(NFC_SEND_CMD1 | NFC_SEND_CMD2 | NFC_RAW_CMD |
+                            (1 << NFC_ADDR_NUM_OFFSET) | NFC_SEND_ADDR |
+                            NFC_CMD_RNDOUT);
 }
 
 static int nand_read_page(const struct nfc_config *conf, u32 offs,