mx6slevk: Keep a single defconfig

Remove mx6slevk_spinor_defconfig and mx6slevk_spl_defconfig in
favor of having a single mx6slevk_defconfig to help reducing
the maintenance effort.

Signed-off-by: Fabio Estevam <festevam@denx.de>

diff --git a/configs/mx6slevk_spinor_defconfig b/configs/mx6slevk_spinor_defconfig
deleted file mode 100644 (file)
index 3491cbc..0000000
--- a/configs/mx6slevk_spinor_defconfig
+++ /dev/null
@@ -1,71 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_TEXT_BASE=0x87800000
-CONFIG_SYS_MALLOC_LEN=0x300000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SF_DEFAULT_SPEED=20000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0xC0000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_MX6SL=y
-CONFIG_TARGET_MX6SLEVK=y
-CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx6sl-evk"
-# CONFIG_CMD_BMODE is not set
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_SPI_BOOT=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
-CONFIG_SYS_PBSIZE=532
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_MAXARGS=32
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_MXC=y
-CONFIG_FSL_USDHC=y
-CONFIG_MTD=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_SMSC=y
-CONFIG_FEC_MXC=y
-CONFIG_MII=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX6=y
-CONFIG_DM_PMIC=y
-CONFIG_DM_PMIC_PFUZE100=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_PFUZE100=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_DM_SERIAL=y
-CONFIG_MXC_UART=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_MXC_SPI=y
-CONFIG_DM_THERMAL=y
-CONFIG_IMX_THERMAL=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX=y

diff --git a/configs/mx6slevk_spl_defconfig b/configs/mx6slevk_spl_defconfig
deleted file mode 100644 (file)
index 9c92360..0000000
--- a/configs/mx6slevk_spl_defconfig
+++ /dev/null
@@ -1,88 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_TEXT_BASE=0x87800000
-CONFIG_SYS_MALLOC_LEN=0x300000
-CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SF_DEFAULT_SPEED=20000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x80000
-CONFIG_MX6SL=y
-CONFIG_TARGET_MX6SLEVK=y
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
-CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx6sl-evk"
-CONFIG_SPL_TEXT_BASE=0x00908000
-CONFIG_SYS_MONITOR_LEN=409600
-CONFIG_SPL_MMC=y
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-# CONFIG_CMD_BMODE is not set
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
-CONFIG_SYS_PBSIZE=532
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_SYS_MALLOC=y
-CONFIG_SPL_FS_EXT4=y
-CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
-CONFIG_SPL_I2C=y
-CONFIG_SPL_WATCHDOG=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_MAXARGS=32
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PART=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SYS_MMC_ENV_DEV=1
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_DM_I2C=y
-CONFIG_SPL_SYS_I2C_LEGACY=y
-CONFIG_SYS_I2C_MXC=y
-CONFIG_FSL_USDHC=y
-CONFIG_MTD=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_SMSC=y
-CONFIG_FEC_MXC=y
-CONFIG_MII=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX6=y
-CONFIG_DM_PMIC=y
-CONFIG_DM_PMIC_PFUZE100=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_PFUZE100=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_DM_SERIAL=y
-CONFIG_MXC_UART=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_MXC_SPI=y
-CONFIG_DM_THERMAL=y
-CONFIG_IMX_THERMAL=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX=y